Latest electrode welding Tenders | Government electrode welding Tenders

Central Government / Public Sector

CTN :45066217

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - casnub bogies of side frames bolsters : actual lot 03122605 0430 pl no. 98117117 (15) (hsn code 72044900-gst 18%-on fcm basis) scrap of cond. & unserviceable released casnub bogies of side frames bolsters with or without attachments of spring planks brake beams push rods equalising levers springs adopters wedges, brake blocks and rubber pads.(gas cutting only two cuts is permitted for side frames and bolsters and bogies 6 cuts to loadable size for lorry). location road no.2 (image attached) (note: 1. if any ss/ corten steel & non-ferrous items found during cutting / loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )

CTN :45057343

12 May, 2026 NA

Jodhpur - Rajasthan

Tender For supply of g2 3439-000146 electrode welding cast iron 3.15mm , k7 4210-002880 charge fire ext dry powder 50 kg , k7 4210-000546 charge fire ext water type carbon , k7 4210720312131 ncn 4210 002877 charge fire ext dry powder 2kg dry , k7 4210720312130 icn 4210- 002876 charge fire ext dry powder 1 kg dry che

CTN :45063851

12 May, 2026 NA

Jodhpur - Rajasthan

Tender For supply of g2 9510-000303 steel bar alloy hot rolled flat 25 x 3mm , g2 9510-000307 steel bar alloy hot rolled flat 30 x 6mm , g2 9535-000107 brass foil cold rold 160x0.16mm , g2 3439-000009 electrodes welding steel armour 5.00mm , h1 a 8010-000128 thinner antichill , h3 5530-400036 plywood general purpose wwr-ab-3 ply 240 , h3 5530-400052 plywood general purpose wwr-ab-7 ply 180 , h3 5530-400046 plywood general purpose wwr-ab 5ply 180c , h3 5530-400084 ply wood for general purposes mr-ab 3 pl , h3 5530- 000208 plywood for general purposes bwr-aa 5 pl , h2 8305-000050 cloth bunting yellow , h2 8305- 000048 cloth bunting scarlet , h1 b 5350-000008 abrasives cloth emery or corundum size o , h4 8115-000523 boxes fibre board rigid size 375x225x150

Central Government/Public Sector

CTN :45054942

11 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl.no. 98322000. condemned and unserviceable guillotine shearing machine with motor, pulley, back gauge, blade, drive assembly, plate clamping assembly and without electrical panel. id no.314105050, u/c no.120124001.make: batliboi and co. vide udm scrap advice note no. 012282-25-01479 dt. 17.03.26. approximate total weight - 11500 kgs [mild steel-11410 kgs, cast iron -30 kgs, brass/bronze -20 kgs, copper-30 kg, wastage-10 kgs]. note: 1. rate per number should be quoted. 2. as is where is basis. 3. cutting and dismantling is permitted. 4. crane loading is permitted. 5. digging is not permitted 6.incoming cables to the motor terminal are not for sale. 6. custodian should cut the power supply during delivery if required. 7. the total weight and break up of the total weight is approximate. railway is not responsible for any shortage of weight. 8. the purchaser may visit the machine offered for condemnation and check the site conditions for delivery feasibility before quoting the offer 9. purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment, gas cutting equipment and necessary trained men. 10. the purchaser will be held responsible for any damage/fire accident caused to the railway property. 11. after completion of delivery purchaser has to keep the cutting and loading spot neat and clean. custodian: sse/mmw/goc

Central Government/Public Sector

CTN :45054959

11 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot non ferrous scrap - p.l. no. 98230025. aluminium scrap consisting of condemned and unserviceable beadings , louvre shutters, glass shutters (without glass) , pipes, plain / chequered sheets ,window grid, sheets, room partition channels and frames, coach window frame ,angle,sliding door,channel, ladders ,warning and indication board, aac ( all aluminium conductor ) , roof top blower parts , flats of sorts and sizes and similar items aluminium in nature . as is where is condition . note:- (1) manual removal of ferrous / fiber /glass/ wooden attachments permitted ( i.e. chisel cutting and hammering ) but gas cutting not permitted. (2) cssd/goc electronic weigh bridge to be used for weighment .

Central Government / Public Sector

CTN :45054924

12 May, 2026 NA

Multi City - Telangana

Tender For auction sale of others - 74081-26-04-001-hyb-mly- ms water tank: scrap. cond. unserviceable ms water (predominant ferrous structure) consisting of rails and ms flats, pvc water tanks. total nominal weight of lot=87.12 mt. total number of ms water tanks=01. the offered is for sale and for dismantling/demolitionpurpose available under the jurisdiction/custody of sse/works/mly, delivery by actual weightment basis only. (please check lot image for inventory and photos of the material) location. available inside tsmd compound- moula ali. ds 8 no. 074081-26-00020 dt.17.04.2026. state telangana. pl no.98050011 hsn code. 72044100. refer to depot conditions for gstin of state railways, list of holidays and other conditions. special conditions. 1. approximately, 100 meters distance material shifting shall be done by purchaser to reach proper approach road. 2the tsmd pitwheel lathe ohe line is available beside the water tank. therefore care shall be taken while dismantling. 3.in order to make an assessment the purchaser may visit the lot location and inspect the lot and satisfy themselves before bidding. 4. post-auction no representation shall be entertained. 5. the purchaser shall be liable to make good any damage loss caused to railway property during cutting and delivery. 6. the bidder should provide proper barricading all-round the structure to prevent damaging of adjoining structures from dismantled material and not to endanger the safety of human beings and public/ private property in vicinity. purchaser should place safety banner surrounding the work place/ spot. 7. gas cutting is permitted. 8. the purchaser has to make his own arrangements such as tools, lifting tackles, gas cutting equipments and necessary trained men for cutting, loading & clearing the debris etc. they should have fire fighting arrangement and first aid box for any emergency. 9. delivery by actual weighment basis only.

CTN :45011300

07 May, 2026 NA

Dehradun - Uttarakhand

Tender For supply of electrical items e e - switch 6 amp , switch 16 amp , switch and socket combined 6 amp , switch and socket combined 16 amp , socket 6 amp , socket 16 amp , plug 3 pin top 16 amp , angle holder , pendent holder , button holder , led tube light 20 w 4ft long , led tube light 20 w 2ft long , led light bulb 10 w , led light bulb 15 w , insulation tape half inch , insulation tape 1inch , pvc copper wire 1.5 sqmm single core 90 mtrs roll , pvc copper wire 2.5 sqmm single core 90 mtrs roll , pvc copper wire 1.5 sqmm twin core 90 mtrs roll , pvc copper wire 2.5 sqmm twin core 90 mtrs roll , pvc copper wire 4 sqmm twin core 90 mtrs roll , pvc copper wire 6 sqmm twin core 90 mtrs roll , pvc electric alumun twin core 10 sqmm twin core 90 mtrs roll , pvc flexible wire 40 by 76 , pvc square box 4inch x 4inch , pvc square box 7inch x 4inch , pvc square box 6inch x 8inch , pvc square box 10inch x 8inch , plastic screw bit 100 per pack pvc gitti , nails for wiring clip 100 per pack pvc clip , fan regulator , capister for fan , pvc casing caping size 1inch x6fft , pvc casing caping size 1.5inch x6ft , mcb 240 v 06 amp , mcb 240 v 10 amp , mcb 240 v 16 amp , mcb 240 v single pole 32 amp , mcb 240 v single pole 40 amp , benzene , bitumen thermometer , weighing matchine 30 kgs capacity , washing matchine heavy duty , solar water heater 500 lpd , double door standard deep freeze , refrigerator 400 ltrs , water purifier , pedestal fan , mma arc welding matchine 25 kva , mma mild steel arc electrodes welding rod 2.5mm ) /bid number : gem/2026/b/7474957 * /dated: 27-04-2026 & & / bid document 1 / 40

CTN :45004645

07 May, 2026 NA

Kangra - Himachal Pradesh

Tender For supply of electrode welding cast d d - elecrode welding cast , anabond , throttle body spray , avr gen , pump assy fuel

CTN :45011326

08 May, 2026 NA

Kangra - Himachal Pradesh

Tender For supply of leather cloth black , plywood general purpose , sheet cellular , electrode welding cast , feviquick , throttle body spray , alcohol isopropyl

CTN :44846074

29 Apr, 2026 NA

Jalandhar - Punjab

Tender For bid to ras supply of 10596915 8030-000016 solvent rust , 10415852 3439- 000015 electrodes welding steel mild general pu , 10414179 8010-000220 paint r.f.u. nitrocellulose finishing , 10418277 8010-000579 paint rfu fin matt air drying br spr whi , 10414365 3439-000096 rod welding copper 4.00mm , 10411951 3439-000020 electrodes welding steel high tensile 2 , 10535889 6810-000040 spirit denatured , 10409075 3439-000001 electrodes welding bronze 3.15mm , 10410798 5315- 000813 nails steel wire round 20 mm x 1.6 mm

Electrode Welding Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector