Latest electrofishing machine Tenders | Government electrofishing machine Tenders

corporations/Associations/Others

CTN :45276552

01 Jun, 2026 63.50 Lacs

Jaipur - Rajasthan

Tender For supply, installation, testing and commissioning of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure a attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., single aperture, providing & fixing of wiring accessories oem fabricated f

corporations/Associations/Others

CTN :45278994

01 Jun, 2026 63.50 Lacs

Jaipur - Rajasthan

Tender For sitc of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer -sitc of elv equipment - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , single aperture, providing & fixing of wiring accessories oem fabricated following size g

Central Government/Public Sector

CTN :45227330

09 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of under slung memu traction motor (with gear case) of type tme-49-35-4 and fasteners including termination crimping lugs, cable markers with heat-shrinkable sleeves for cables, mating connectors, equipment mounting and earthling hardware as necessary. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45094036

15 May, 2026 4.88 Crore

Parbhani - Maharashtra

Tender For corrigendum : tender for supply of t&p material (safety equipment s) under parbhani circle. - safety belt, lineman tool bag, 33kv rubber hand gloves, 11kv rubber hand gloves, rubber hand gloves lt (class 0), tester, l.t. discharge rod, ht discharge rod, screw driver-100,150&225 mm, spanner sets ring type, double ended spanner set, adjustable spanner-255mmx30mm., led torch with rechargeable batteries, nylon/manallia rope 24 mm., frp ladder, hacksaw, crimping tool, axe, hammer, safety helmet en 397 2012 (yellow)

CTN :45138031

19 May, 2026 NA

Gaya - Bihar

Tender For supply of lan estabilishment - optical layer 2 manageable switch , stp cable rolls , ups 1 kva line interactive , rack 4u , ofc 12 core armoured , stp cable pre-patched 3m , stp cables pre-patched 1m , i and o box , patch panels , pigtail , pigtails , lan tester , media converter , fdmc 12 port , rj 45 connectors , crimping tool , krone tool , patching tool , caping casing with nails , 42u network equipment rack , installtion and commissioning with all additional accessories

Central Government/Public Sector

CTN :45015345

21 May, 2026 NA

Kapurthala - Punjab

Tender For corrigendum : supply of complete pre-fabricated driver desk along with mounting frame, front cover between driver desk and nose cone, housing all the necessary equipment and driver/ guard seat, master cum brake controllers per clause 3.18 of specification no. icf md spec-408, issue status-01, rev-01, cab recording equipment as per clause 3.36 of specification no. icf md spec-408, issue status-01, rev-01along with termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and accessories, including horn & sun visor. (one set per dtc) note: cab radio shall be provided by ir for sections with gsm-r [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45066770

02 Jun, 2026 NA

Kapurthala - Punjab

Tender For corrigendum : supply of traction transformer for hs-spic with required number of secondary traction windings along with protection equipment, safety chain arrangement and ht cablewith protection shield including termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and accessories including auxiliary machines such as oil pump, oil cooling blowers as per clause 4.3 of rdso specification no. rdso/pe/spec/emu/0196-2019 (rev.0) along with mounting hardware (one set per hs-spic)., as per drawing: as per clause 4.3 of rdso specification no. rdso/pe/spec/emu/0196-2019 (rev.0), packing instruction: suitably covered with biodegradable transparent polythene and packed in wooden box.the material used for product packaging shall be eco-friendly .each packing shall be stenciled/labeled handle with care, consignee name, order no,pl's no , description ofitem, batch no, drg/spec no, qty,firm's name, &date of despatch etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed below: a)nameof the manufacturer b)purchaseorder number c)purchaseorder date d)uniqueserial number (or lot number for bulk items) of the manufacturer or e)dateofmanufacture f)deliverychallan no. g)deliverychallan date 2.the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. [ warranty period: 36 months after the date of delivery ]

Central Government/Public Sector

CTN :45013030

25 May, 2026 NA

Mumbai - Maharashtra

Tender For supply and testing of traction transformer complete with cooling system and accessories likeht cable along with protection shield in passenger compartment and underframe area, thermostate etc related protection equipment and with safety chain arrangement including termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cable equipment mounting and earthing hardware and accessories suitable for 3 phase medha igbt propulsion system for 25 kv ac icf make memu rakesto rdso specification no rdso/pe/spec/emu/0096-2008(reve4) of december 2009 with icf annexure no icf/memu/0096-02(rev.0)make siemens [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44969509

30 Apr, 2026 NA

Kapurthala - Punjab

Tender For supply of complete pre-fabricated driver desk along with mounting frame, front cover between driver desk and nose cone, housing all the necessary equipment and driver/ guard seat, master cum brake controllers per clause 3.18 of specification no. icf md spec-408, issue status-01, rev-01, cab recording equipment as per clause 3.36 of specification no. icf md spec-408, issue status-01, rev-01along with termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and accessories, including horn & sun visor. (one set per dtc) note: cab radio shall be provided by ir for sections with gsm-r [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44807827

30 Apr, 2026 NA

Kapurthala - Punjab

Tender For corrigendum : supply of complete pre-fabricated driver desk along with mounting frame, front cover between driver desk and nose cone, housing all the necessary equipment and driver/ guard seat, master cum brake controllers per clause 3.18 of specification no. icf md spec-408, issue status-01, rev-01, cab recording equipment as per clause 3.36 of specification no. icf md spec-408, issue status-01, rev-01along with termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and accessories, including horn & sun visor. (one set per dtc) note: cab radio shall be provided by ir for sections with gsm-r [ warranty period: 30 months after the date of delivery ]

Electrofishing Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors