Latest electromechanical equipment repair Tenders | Government electromechanical equipment repair Tenders

CTN :45592297

24 Jun, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan points (06) in

CTN :45568571

06 Jul, 2026 17.00 Lacs

Srinagar - Jammu And Kashmir

Tender For annual maintenance contract on account of repairs/ replacement to electro- mechanical equipment at five intermediate pumping stations viz konikhan, sadrabal, nigeen, nishat, and shanpora of jklcma

CTN :45562806

25 Jun, 2026 8.79 Lacs

Katra - Jammu And Kashmir

Tender For operation watch and ward of departmental electro-mechanical equipment installed at lis kandyar in district reasi.

State Government

CTN :42986964

01 Jul, 2026 41.59 Lacs

Awantipora - Jammu And Kashmir

Tender For corrigendum : supply, installation, testing and commissioning of electro-mechanical equipment at water supply scheme t.m shah of jal shakti (phe) mechanical division south awantipora under jjm.

State Government

CTN :42986966

01 Jul, 2026 74.94 Lacs

Awantipora - Jammu And Kashmir

Tender For corrigendum : supply, installation, testing and commissioning of electro-mechanical equipment at water supply scheme dachnimall (stage 1st and stage 2nd) of jal shakti (phe) mechanical division south awantipora under jjm.

State Government

CTN :45228383

29 Jun, 2026 56.32 Lacs

Dumka - Jharkhand

Tender For corrigendum : operation and maintenance of 2x2 mw turbo generator sets and their auxiliaries, hydro mechanical and electro mechanical equipment inside and outside power house including 33 by 11 by 0.415 kv switchyard and allied housekeeping services at mhps dumka

Central Government And Public Sector

CTN :45493498

30 Jun, 2026 NA

Bengaluru - Karnataka

Tender For providing of operation and maintenance of electro-mechanical installations - outsourcing maintenance of cellular mobile access equipment, mobile infrastructure, diesel filling and dg operation at bsnl base transceiver stations (bts) sites (2g and/or 3g and/or 4g)..,operation and maintenance of electro-mechanical installations - outsourcing maintenance of cellular mobile access equipment, mobile infrastructure, diesel filling and dg operation at non-bsnl base transceiver stations (bts) sites (2g and/or 3g and/or..,operation and maintenance of electro-mechanical installations - outsourcing maintenance of cellular mobile access equipment at infrastructure provider (ip) sites (2g and/or 3g and/or 4g) of bengaluru business area,operation and maintenance of electro-mechanical installations - outsourcing of rigger activities for bts sites of bengaluru business area

State Government

CTN :45445001

24 Jun, 2026 60.00 Lacs

Jummu - Jammu And Kashmir

Tender For installation of electro-mechanical equipment at cps muthi for water supply to durga nagar. - h.c pumping units-2no-providing, installation, testing and commissioning of 50000 gph x 150 mtrs. head (02 no.s) horizontal centrifugal split casing pump with slow peed motor at cps muthi by way of excavation of earth work for laying of rcc foundation block. the job includes construction of foundation block for installation of 50000 gph x 150 mtrs. hend horizontal centrifugal pump set at cps muthi. by way of dismantling of old foundation blocks with the help of required tool and tackle and manual labour as per site requirement. disposing off the excavated material from the site to distance of at least 0.50 km with the help of manual labour and mechanical transport. job includes digging of pit of size 6x3.5x4and disposal of excavated material from the site of the work to the place of dumping. providing/lying of rcc foundation block of size 5x3.5x5(labove the ground level) in 1:2:3 cement concrete mix having requisite reinforcement with 12 mm dia. tor steel from center to center with proper spacing. fabrication and fitting of foundation bolts duly welded with cross members and threading at top with nut. foundation bolt shall be welded with tor steel and firmly grouted in the cement concrete mix, plastering and finishing from outside: fitting of base frame plate on the top of the block and leveling it both horizontally as well as vertically. strengthening of the base frame by providing and welding of m. s. channel cross members of required size and as per the size of frame for giving extra strength against vibration of the unit and on full load running conditions. complete job includes cost of material and labour charges for laying of the foundation block, plastering and finishing. placing horizontal centrifugal pumping unit on the base frame by using hydra crane, chain block, manual labour and other tools and tackles. leveling of the pump and motor properly on the base frame and coupling them by fitting of the m.s. coupling bolts with nuts rubber bushes and m.s. fasteners required for horizontal centrifugal pumping unit base connections with base frame job includes cost of material, carriage of machinery and allied materials to the site of work, loading/unloading and allied charges.suction line: fabrication of suction line by providing / fabrication of ms pipe of dia 150 mm. of length as per site requirement (09 mtr approx.) proper beveling of ms pipe for v-butt welding joints. the job includes providing and. fabrication of ms bends of 150 mm dia out of ms pipe 150 mm dia. providing/fabrication / fitting of ms flanges-4no wherever required and with the one flange compatible to be fitted the suction flange of both the pumps. job includes providing and fabrication of ms bends of 150 mm dia -04 no. the job also includes providing and fitting of sluice valves of 150 mm dia. (cs material)- 02no.(01 no.for each suction line of 02 pump sets) on suction lines. providing, fabrication and fitting of ms flanges at both end of sluice valve as per site requirement.delivery line: fabrication of delivery line by providing and fabrication of ms pipe 125 mm. upto manifold. proper beveling of ms pipes for v-butt welding joint. job includes fabrication/fitting of ms pipe 125 mm dia. upto manifold. job also involves making interconnection with manifold with the delivery flange of newly installed pumps. the job involves fabrication/fitting of ms bends as per site requirement no-02 out of 125 mm dia. ms pipe. fabrication of 04 no. ms flange of 125 mm dia. to match delivery flange of the pump and welding of flange with one end of the bend. makes interconnection of manifold with delivery pipe. job also includes providing/fitting of sluice valve (cs)-2no and reflux valve of 125mm-2no (cs material) on delivery side of each pumpset by the way of welding for on delivery line. all the welding work shall have to executed butt pre heated high pressure welding electrod

CTN :45314114

08 Jun, 2026 50.39 Lacs

Banihal - Jammu And Kashmir

Tender For corrigendum : construction of deep drilling bore well 200m dia. pump room with electro-mechanical equipment, creation of electric substation, sump tank/delivery tank including pipe network with anchor blocks and creation of water filling station at aarbal banihal.

Central Government And Public Sector

CTN :45366603

24 Jul, 2026 496.90 Crore

Doda - Jammu And Kashmir

Tender For lot-2a electro-mechanical works (except gsu transformer, gis, xlpe cable and switchyard equipment) of 260 mw (2x130mw) dulhasti stage-ii h.e project, kishtwar district of ut of j and k, india

Electromechanical Equipment Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government And Public Sector

State Government

Central Government And Public Sector