Latest electronic analytical balance Tenders | Government electronic analytical balance Tenders

corporations/Associations/Others

CTN :45480518

23 Jun, 2026 11.80 Lacs

Erode - Tamil Nadu

Tender For construction of 40 ton capacity weight bridge foundation work civil work and supply delivery installation of 1 no deck top computer 1 no printer with 1 no, 2 hour back up 1kva ups at vendipalayam dump yard in ward no 60

CTN :45475070

15 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of non-consumables for physics lab in basic engineering (first year) department - purchase, joule calorimeter - copper vessel, battery eliminator 3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0 2a), voltmeter (0-5v), thermometer (alcohol), stop clock, ic regulated battery eliminator- ic regulated, input: 230v ac; output: 0-12v dc in steps of 2v; capacity: 1a or 2a., galvanometer- moving coil type, 30-0-30 scale, unbranded with bhel specification-sensitivity 0.143mm/v, voltmeter- dc voltmeter; range 0 10 v, analog, ammeter- dc (0 - 2 amp), parallelogram apparatus- parallelogram law of forces apparatus fitted with stand, decade resistance box- resistance box 12 month warranty (dial type) -manganin coil- 2 dials, sonometer apparatus- sonometer with meter scale attached along with knife edge, tuning forks set 256, 384, 512 ranges, hammer, slotted weight - 500 gm each to a total of 3 kg. brass wire (5 m), travelling microscope- branded travelling microscope 0 200 mm horizontal and 0-150 mm vertical measurement, potentiometer - it features a 1-meter to 10-meter constantan/manganin wire stretched on a wooden or sunmica baseboard with a millimeter scale. it includes 4mm brass terminals, a pencil jockey for contact, wire options (10 wires), and a typical resistance range of 10-20 ohms, ideal for high-precision voltage measurements., viscosity apparatus stokes apparatus with metre scale attached and long cylindrical glass jar, glass beads small size (1 box), screw gauge (0-15 mm), rheostat - high-grade ceramic tube, oxidized resistance wire, 0.5a 5a, range 10 100 ., deflection magnetometer apparatus - deflection magnetometer apparatus with compass box and two short bar magnets, solar cell kit- the apparatus consist of variable dc power supply, led, solar cell and two multimeters (or an ammeter and a voltmeter). a variable dc power supply of 0 5v. light source is provided by led. the illumination intensity of the led can be controlled, wheatstone bridge kit- series arm: four decade dials in steps of thousands, hundreds, tens, & units of ohms. ratio arm: the ratio arm of the bridge is capable of selecting multiplying factor of 0.001, 0.01, 0.1, 1, 10, 100, 1000 for resistance measurements. two press keys are provided, one marked b is for battery & one marked g is for galvanometer one toggle switch is provided for internal battery a sensitive galvanometer is provided in the bridge., ohms law verification kit- battery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), standard resistance coil of 1, 2 ohm (2-set) wound on a wooden bobbin, boyle s law apparatus - the apparatus includes the quill tube, a retort stand, a clamp, and a mounted meter scale. quill tube specifications: length: approximately 50 cm. bore diameter: uniform bore, roughly 1 mm to 2 mm. construction: glass tube with one end sealed. trapped substance: a mercury pellet (or thread) of length 10 to 15 cm is introduced to enclose a column of air. mounting: attached to a half-meter or meter scale., torsional pendulum - torsional pendulum metallic disc, symmetrical masses and pendulum stand, steel wire, compound bar pendulum- one meter long iron strip well painted with holes at a distance of every 5 cm and also with pair of brackets and a heavy base table top stand with stop clock, helical spring apparatus-- structure: a rigid support mounted on a heavy metal base, typically cast iron, to ensure stability during tests. springs: high-tensile steel spiral springs, typically (approx 25 mm) diameter, (100 mm) long. measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement. loading mechanism: a, typically (50g), hook-attached weight hanger at the bottom.pointer: a fine pointer attached to the bottom of the spring moves along the scale. accessories: includes a set of slotted weights (e.g., (6

Central Government/Public Sector

CTN :45474550

16 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - scrap rails 60 kgs of length above/upto 13 meters received from various consignees via trailers, including point & xing rails, check rails, tongue rails, v rails, wing rail, structural rail, narrow rail, with or without gluid joint, nut bolts ,fish plate , c i & other ms attachments. note: - 1. one cut will be allowed for easy loading. if any rail of 52kg is found, the same will also be delivered(2).maximum gross weight allowed at the weighing bridge at the time of delivery will be 40 mts (tolerance of 2% is allowed). location -b by 3

CTN :45430824

18 Jun, 2026 NA

Ariyalur - Tamil Nadu

Tender For supply of lab equipment - basic engineering lab materials, digital balanceweight 500g, accuracy 0.01g, top pan. tare function,caliberation- automatic external display type: led, digital tds meterrange 0-9990 ppm, resolution 1ppm, digital lcd display, atc feature., digital ph meterph range o to 14, resolution 0.01 ph, digital display, joule calorimetercopper vessel, battery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), thermometer (alcohol), stop clock, mortar with pestleporcelain/agate,gazed exterior, unglazed grinding surface.item weight 2290 gramsitem diameter 4 inches, water distillation unitoutput capacity: 2 4 liters per hourmaterial: stainless steel boiler and condenserheater: built-in electric heating elementpower supply: 220 240 v ac, 50 hzcooling: water-cooled condensersafety: automatic low water cut-off, ic regulated battery eliminatoric regulated, input: 230v ac; output: 0-12v dc in steps of 2v; capacity: 1a or 2a., galvanometermoving coil type, 30-0-30 scale, sensitivity 20 a/div, resistance approx. 100 ohms., voltmeterdc voltmeter; range 0 10 v, analog , ammeter dc (0 - 2 amp), cdecade resistance box3 or 4 dials, range 0.1 to 100 or 1k , constantan/manganin wire coils., rheostathigh-grade ceramic tube, oxidized resistance wire, 0.5a 5a, range 10 100 ., solar cell kitthe apparatus consist of variable dc power supply, led, solar cell and two multimeters (or an ammeter and a voltmeter). a variable dc power supply of 0-5v. light source is provided by led. the illumination intensity of the led can be controlled, wheatstone bridge kitseries arm: four decade dials in steps of thousands, hundreds, tens, & units of ohms. ratio arm: the ratio arm of the bridge is capable of selecting multiplying factor of 0.001, 0.01, 0.1, 1, 10, 100, 1000 for resistance measurements. two press keys are provided, one marked b is for battery & one marked g is for galvanometer one toggle switch is provided for internal battery a sensitive galvanometer is provided in the bridge., ohms law verification kitbattery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), standard resistance coil of 1, 2 ohm (2-set) wound on a wooden bobbin, meter bridgetype: 1 m length, with uniform wire (resistance wire)material: constantan or manganin (low temperature coefficient)scale: 0 100 cm, engraved or printedbase: wooden or metal, rigid, non-conductive supportjoints / terminals: brass or copper, fixed for connections2. galvanometertype: analog, moving coil or digital (for null detection)range: sensitive to detect micro-ampere currentsinternal resistance: high, typically ~100 or as specified5. cells / power supplytype: leclanch cells (1.5 v each) or dc power supplynumber: 2 4 cells in series (or supply ~3 6 v)

State Government

CTN :45327098

11 Jun, 2026 NA

Washim - Maharashtra

Tender For corrigendum : weight bridge 50 mt

Central Government/Public Sector

CTN :45429713

16 Jun, 2026 NA

Igatpuri - Maharashtra

Tender For auction sale of pway scrap - scrap ms in mts consisting of 60kg, 52kg, 90r wing rail, v rails tongue rail, stock rail, check rail, sej off sizes alongwith ms bolts and nuts, fish plates and joggle fishplates. remarks - kachcha approach road is available nearby the lot. lot no. has been painted on the lot. delivery will be made on actual weighment basis only at nearest govt. approved weigh bridge. quantity is physically available. delivery will be made during all seasons. the stockholder will be fully responsible for any alteration, addition or deletion in the lot after joint inspection. since the materials are in pwi depot fresh receipts of similar type of released materials are continuously going on near the lot. as such the quantity available is more than the lot proposed. approx weighment is taken as per advice of sse/pway/igp. care should be taken that the same is not delivered only actual lot material weight will be delivered. ci blocks attached with wing and v rails to be cut and returned to the stock holder. only scrap materials mentioned and quantity as per do qty and joint inspection report, ss11 to be delivered. some scrap rails such as 20 rail pieces of 60/52 kg lying near the stack no. 3 & 185 nos of rail 60 kg lying near the stack no 4, 14 nos rail piece of 60 kg and 46 nos rail of 82 lbs lying near the stack no.5, 40 nos of new glued joint 60 kg lying near the stack 7, 93 rail pieces of various sizes near the stack no. 6 and 51 nos of st sleepers lying near the stack no. 6. dounages 09 nos are not included in lot it should not be delivered at the time of delivery. the purchaser shall be responsible for any loss or damage to any other railway property/facility/equipments whether due to his negligence or otherwise and safety of his labour. the quantity as per ss-11 has been amended from 82.311 mts to 84.316 mts. sse (p-way) igp will make necessary corrections in quantity on udm. location - ele. loco shed line km igp/el34-47 up yard, near sse c&w office igatpuri, near old rpf barrak igp up yard & ballast siding km igp/bs 4-5 up yard. qty - 84.316 mts. approx. stock holder - sse (p.way) igp. (original lot no. 014333-25-00005.)

Central Government/Public Sector

CTN :45374556

05 Jun, 2026 NA

Dahod - Gujarat

Tender For auction sale of depot ferrous scrap - miscellaneous ms/gs scrap released from lcw and others consist of st bridge sleepers complete brake gear with or without sets ,gi items , gi pipes,ohe mast/frame , all type & size of rope wire, push trolly, trolly wheels, frame of motor trolly without motor, p-way tools & plant, ohe mast, all type of gate boom, insulating cap, all signalling items, pipes, signal post, rake ballast, phawarah, steel basket, beater, rail screw clamp, mono rail trolley, g.i. bucket, rail tongue, box spanner, pick axe, all types of ms/cs brake beam, insulators, all type of blastered files, all type of chain, all types of booms & fittings, piller, girder,gi pipe,other gi items of sort and size galvanised with or without rubber , rod, broken and damaged condition lever rod,st sleepers,cst 9 pots,ms rod ms parts ,clamp, pool ,,rod, angle, channel, girder spring, cyl . tank, ohe items, engine block, spring plank, ci plate used for st bridge sleeper tools, bit, sabbal, ci items, brake head, glude joint, traction frame, electrical ms frame spring, clamps, solid cutting, solid nut-bolt, pin and other material of cast steel/ms item etc (except-wta item). careful 01 no. cutting allowed for easy loading.material should be loaded with one end from lot as per description. mode of delivery by actual weight. fdp 40 days.

Central Government/Public Sector

CTN :45374561

05 Jun, 2026 NA

Dahod - Gujarat

Tender For auction sale of depot ferrous scrap - scrap released from lcw and others consist of ms plate , ms cutting , ms wire, flooring plates, ms pipe , galvanise pipe , rod, doors ofsort and sizes broken and damaged condition with or without attachment of rivets,nuts, d.v. valve, tarrate of ms scrap, all type of silent blocks,released girders,shock absorbers,equilizer beams,memu bolsters,all types of brake beams,bolts,hinges,pieces of angles, angle coke, plates channels,plates and small pieces of ms items tower wagon engine frames , tie cyl tank ,bar, hand pump ,pipe,cottan steel dors and c s items rail releated all items etc.(except wta items, rail,spring, & other non ferrous items ) corroded and dented with or without rust old used and unserviceable for railway use. miscellanious cast steel/ms scrap released from lcw and others consist of solid angle & channel ,lever rod,ms rod/salliya,tie bar,erc trolly parts and wheel solid pipes,solid chains ,chequered plates, steel sleepers(bridge used),all size equalizing beams, bed plates(bridge used) clamp,pool ,ms patti,and plates, rod, buffer, tools,bit,sabbal, number plates, all types of rail releated items servo motor ,brake cylinder,ci items , brake hea ,rod,angle, channel, girder ,spring, cyl .tank,ohe items , hoist crane machine parts,clamps pully shock abjorber ,ctrb related scrap like as cup, cone, race, inner, draft gear, glude joint, traction frame, electrical ms frame,pieces of garder , small pieces of rail, solid cutting ,side barrier housing, solid nut-bolt,pin, and other pieces of cast steel item/ms etc with minor attachment of inseperable non ferrous material (except- wta item). fdp 40 days. (02 nos. cutting will be allowed for easy loading). material should be loaded with one end from lot as per description. mode of delivery by actual weight.

Central Government/Public Sector

CTN :45365852

20 Jun, 2026 40.00 Lacs

Kalimpong - West Bengal

Tender For repair to certain roads including road furniture at kalimpong mil stn under ge 867 ews - m&l for repairs to pot holes of depth exceeding 30 mm thick, area not exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads , paths etc cutting around edges to at least 25mm in depth, and making good by applying tack coat with paving bitumen grade 10 pack primer (vg-10) @ 5kg per 10 sqm putting in premixed bituminous macadam, well rammed and sealed with binder with paving bitumen grade 30 pack (vg-30) @9.8 kg per 10 sqm blinded with 0.09 cum of stone chipping, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm, complete all as specified and directed., m&l for preparing existing black top road surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with bitumen primer using paving bitumen grade 10 pack (vg-10) @ 5kg per 10 sqm, complete all as specified and directed., m&l for premix bituminous macadam using paving bitumen of grade 30 pack (vg-30) @ 4% by weight of total mix laid / rolled and compacted to required gradient and camber with 8 to12 tonne power road roller and rolled to a uniform smooth surface (consolidated thickness 75 mm or less), complete all as specified and as directed., m&l for 40 mm thick consolidated thickness bituminous premixed carpet with 0.54 cu.m per 10 sqm of stone chipping and mixed with 29.20 kg per 10 sqm of binder using paving bitumen grade 30 pack (vg-30) laid and rolled with 8 to 12 tonne power road roller and compacted to required camber and gradient, complete all as specified and directed., m&l for liquid seal coat by applying paving bitumen of grade 30 (vg-30) @ 9.8 kg per 10 sqm blinded with 6.3 mm size stone chipping @ 0.09 cum per 10 sqm and rolled to a uniformed smooth surface by 8 to 12 tonne power road roller, complete all as specified and directed., providing and lying mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29 using approved coarse aggregates, fine aggregates filler materials and bitumen, prepared by using mastic cooker including cost and carriage of all ingredients, cost of heating aggregates and binder mixing in specified proportions conforming to approved job mix formula and laid to required level and slope after cleaning the surface, compacting, sealing the construction joints and surface finishing conforming to specifications including providing antiskid surface with bitumen pre-coated fine arraigned hard stone chipping of 13.20mm nominal size at the rate of 0.005 cum per 10 sqm and at an approximate spacing of 10 cm centre to centre in both directions, pressed into surface when the temperature of surfaces not less than 200c, protruding 1 mm to 4mm over mastic surface including the hire charges of all tools and plants and machinery, pay of operators, cost of fuel and lubricants and quality control all complete as per clause 516 of specification for road and bridge works of morth (5th revision). 25mm thick (pakur) vg-30 (po, 10/20 (p), complete all as specified and directed, supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed., supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with pama striplens reflector of model no. da 972.0 fixed with and incl ms stud of suitable size as per manufactures instructions and all as specified and directed., m&l for applying ther

Central Government / Public Sector

CTN :45374516

16 Jun, 2026 NA

Krishna - Andhra Pradesh

Tender For auction sale of others - flt material : between kondapalli and krishna canal ; pl no:98050047( hsn code-72042910)-cond and u/s ms scrap of flt( flood light towers-25 nos, in staging condition) of different spans ( 1x22.86-18 nos, 1x15-07nos). consisting of main angles of sizes-110x110x10, 90x90x6, 50x50x5, bracing angles of sizes-45x45x5, 40x40x5, bottem base brasing angles(110x110x10 & 130x130x10) , top platform bottom support angles(50x50x5), plat form horizontal angles (50x50x5), plateform vertical angles ( 50x50x5), top horizontal angles(50x50x5), top plate(10 mm thick),plate form plate 6mm thick, ladder 50x10, flat, ladder rods, main angles joining angles inside 90x90x6, out side joint plate connecting main angles, intermediate horizontal anghes 45x45x5, top gusset plate 25mm thick, trapezoidal etc. all the flt material of the lot qty-49.91 mt ( approx). available at wagon depot ( opp 12t crane shed), through yard(km no; ty/139-ty/144, ty/111-ty/106, ty/96-ty/92, ty/234-ty/230), west central cabin( ty/14-ty/11), near ipf up/yd office( near dy/1048), in side dls,( near dls/1028), near f-cabin( dy/112a-dy/109), area control office,( dy/1035-1039), pf no-10(dy/1004-1003), at ryps,( 574/13-574/16), ki hut 1&2( 569/c10-c9, 568/c14-11), els pit , els @km( ls/22-ls/15, ls/74-ls/98), kcc station yard( 423/28-26, 423/32-34), scrap depo/ryp, opposite to old c- substation, k i-end old weighting bridge, main electrial sub station( back side), beside a-substation, opposite to stripping shop, beside btc pump house, back side of 03 ward, back side of cpoh /depo, opp paint shop). near air compresser room, under control of sse/br-ii/bza. cutting/dismantling is permitted for loading perpose. note- extreme saftey precations should be taken during cutting/dismantle the flts without any obstructing to the ohe and traks, while cutting the all flts safty measures should be followed, cut parts should be shifted approx 50-70 meters near to road side which are away from ohe lines. note: if any damage occur to rly while entire processes firm is the responsible for that damage. diismantling is permitted in power blocks, and traffic block only. delivery on actual weight basis only. all weights are obtained by the certified ds-8 by the custodian, ds no:0244660001. dt.18.05.2026. note: 2) cutting permited up to ground level only. purchaser shall prepare a dismantling action plan along with abundant safty precautions and same to be apporved by custodian before start of any dismantling . partial delivery may be permitted subject to full bsv payment of the complete lot. it will be the responsibility of custodian sse/br-ii/bza to facilitate required power & traffic block to complete the delivery of lot smoothly.for easy loading and tranpotation purpose, only after ensuring sufficient safty measures againt fire hazards etc to avoid any mishap to any mishap to any person, railway material etc.

Electronic Analytical Balance Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors