Latest electronic equipment repair Tenders | Government electronic equipment repair Tenders

Central Government/Public Sector

CTN :45741386

23 Jul, 2026 NA

Bhusawal - Maharashtra

Tender For indoor & outdoor signaling work including supply of materials, installation, testing & commissioning of electronic interlocking at wardha station (distributed configuration) in connection with wardha-badnera-bhusawal 3rd & 4th line of nagpur division of central railway.

Central Government/Public Sector

CTN :45735434

01 Jul, 2026 NA

Multi City - Multi State

Tender For supply of annual maintenance contract of electronic lorry weigh bridge (lwb) of 30 mt at nf/ mx scrap yard for 03 years as per scope of work. make: leotronics ( 01 nos. for 01 year) ]

State Government

CTN :45734399

28 Jul, 2026 50.49 Crore

Jagdishpur - West Bengal

Tender For additional work of laying distribution system (lds), road restoration, land filling (wtp) and cable trench (wtp), providing electronic type lighting arrestor to protect sophisticated equipments at wtp, jack pushing for railway crossing ...

Central Government/Public Sector

CTN :45730434

21 Jul, 2026 NA

Vadodara - Gujarat

Tender For "design, supply, installation, programming, testing and commissioning of newhot standby electronic interlocking system at waghodiya , jarod and lotnastations and ei alteration at dabhoi and samlaya station along with supply,installation, testing and commissioning of various indoor and outdoor signalingsystem with bpac in dabhoi-waghodiya -jarod - lotna-samlaya section inconnection of provision of gauge conversion work under dy. cste construction,vadodara, gujarat (western railway)

Central Government/Public Sector

CTN :45730556

17 Jul, 2026 NA

Hisar - Haryana

Tender For trd modification work in c/w provision of interlocking of 24 manned lc gates (additional work) & 2 manned lc gates over various sections and distributed electronic interlocking at hisar station over bikaner division.

State Government

CTN :45626472

06 Jul, 2026 2.41 Lacs

Anuppur - Madhya Pradesh

Tender For corrigendum : work contract for availing expert services for inspection, testing and rectification of m/s bhel make esp electronic controller and its optimization, tunning, troubleshooting and ios to reduce stack emission of 210 mw atps, mppgcl, chachai

CTN :45739233

21 Jul, 2026 NA

Parganas - West Bengal

Tender For providing of custom bid for services - annual maintenance contract for repairing or periodical servicing including calibration on certified by west bengal state govt authority for 40 mt electronic weigh bridge as per scope of work,custom bid for services - annual maintenance contract for repairing or periodical servicing including calibration on certified by west bengal state govt authority for 40 mt electronic weigh bridge as per scope of work,custom bid for services - annual maintenance contract for repairing or periodical servicing including calibration on certified by west bengal state govt authority for 50 mt electronic weigh bridge as per scope of work,custom bid for services - annual maintenance contract for repairing or periodical servicing including calibration on certified by west bengal state govt authority for 50 mt electronic weigh bridge as per scope of work

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

CTN :45536921

03 Jul, 2026 NA

Leh - Jammu And Kashmir

Tender For bid to ras electronic work station for test and measuring lab , elack batery charger model

CTN :45718793

09 Jul, 2026 9.90 Lacs

Chittorgarh - Rajasthan

Tender For 7. बिजली सामग्री सप्लाई कार्य। - 7. electrical material supply work.- anchor fastener (plated) 4" , terminal power strip, 15 amps, 3 socket 3 switch, , pendant bulb holder bakelite, , pendant switch, , pendant bulb holder brass, , hand torch, rechargeable, high power, 15-20 led type, , hand torch, rechargeable, 12 led type, , tube starter 20-65w, , -, , 6m modular plate, , , , 3m modular plate, , , , 18m modular plate, , 12m modular plate, , . . . ., , 8m modular plate, , . . . ., , 4m modular plate, , . . . ., , 2m modular plate, , db box 1 way dummy, , ballast electronic 36/40 w, , pvc conduit pipe 1.25" lengths, , pvc conduit pipe 1" lengths, , pvc conduit pipe 0.75" lengths, , pvc bend 1", , pvc bend 0.75", , flexible pipe 1", , batten 1", , batten 0.5", , dp 20a, , dp 32a, , wall plug (best quality), , cable gitti 6mm(best quality), , cable gitti 10mm(best quality), , ding dong bell, , 3 core, 1.5 sq mm, flexible cable, , 3 core, 1.2 sq mm, flexible cable, , 3 core, 2.5x3 sq mm, flexible cable, , 3 core, 1.5x2sq mm, flexible cable, , 3 core, 2.5x2 sq mm, flexible cable, , bulb 60w pin type, , led bulb 30w holder type, , led bulb 18w holder type, , led bulb 14w holder type, , led bulb 11w holder type, , led bulb 8w holder type, , led bulb 9w holder screw type, , led bulb 5w holder screw type, , led bulb 3w holder screw type, , led bulb 8w holder screw type, , led bulb 14w holder screw type, , led bulb 11w 2 pin, , distribution box 24 way 3 phase, , mcb 6-32a, , mccb 100a, , dp (double pole) mcb box, , pin top plug 5a, , pin top plug 15a, , single core pvc insulated copper wire 1.5sq mm, , single core pvc insulated copper wire 2.5sq mm, , single core pvc insulated copper wire 4sq mm, , single core pvc insulated copper wire 6sq mm, , single core pvc insulated copper wire 10sq mm, , single core pvc insulated copper wire 16sq mm, , ring type aluminum thimble 10 sq mm, , ring type aluminum thimble 16 sq mm, , ring type aluminum thimble 25 sq mm, , ring type aluminum thimble 50 sq mm, , ring type aluminum thimble 70 sq mm, , ring type aluminum thimble 95 sq mm, , ring type aluminum thimble 120 sq mm, , ring type aluminum thimble 150 sq mm, , ring type aluminum thimble 185 sq mm, , ring type aluminum thimble 240 sq mm, , ring type aluminum thimble 300 sq mm, , ring type aluminum thimble 400 sq mm, , m/s wire 1 mm, , pin type aluminum thimble 6 sq mm, , pin type aluminum thimble 10 sq mm, , 18 m modular pvc box, , 12 m modular pvc box, , 8 m modular pvc box, , 4 m modular pvc box, , 2 m modular pvc box, , 6 m modular pvc box, , 3 m modular pvc box, , switch 5a normal, , switch 15a normal, , socket 5a normal, , socket 15a normal, , mcb 6a normal to 32a, , mcb 6a normal to 32a, , 3 core, 2.5 sq mm, flexible pvc insulated cable, , connector strip 6a (12point), , connector strip 10a (12point), , connector strip 16a (12point), , 23/76 twisted pair or flat cable, , switch 6a, , , , , , , , , , , , , , , , , , , , , , , , 3 core,4 sq mm, flexible pvc insulated cable, araldite 32g tube pack, buzzer, call bell, capacitor 2.5/3.15-4mfd, fan regulator 1module 2m, fan regulator normal, hacksaw blade (best quality double sided 1"), led light fitting 8w panel, led tube light fitting 20watt, led tube light fitting 40watt, mcb dp 32a modular type, plug top 25a,3 pin, plug top 5a,3 pin, single phase ac starter 25a, socket 20a, socket 25amp, socket 6a, socket 6a, switch 10a 2way, switch 20a, telephone wire gitti 12mm, telephone wire gitti 14mm, telephone wire gitti 20mm/ 25mm, telephone wire gitti 4mm, telephone wire gitti 6mm, telephone wire gitti 8mm, led light fitting 15w panel, , led light fitting 20w panel, , led light fitting 24w panel, , wooden screw 1.5", , wooden screw 2", , wooden screw 1.0", , cable tie 6" 150mm, , , , , , , , , , , , , , , , , , , , , , , , cable tie 10" 250mm, ceiling fan 48 inch high speed, cling rose, d., d., e., exhaust fan 12", exhaust fan 18", exhaust fan 9", fan sheet, fitting flood light 150w, fitting flood ligh

Electronic Equipment Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government