Latest electronic platform Tenders | Government electronic platform Tenders

State Government

CTN :45679289

04 Jul, 2026 NA

Titlagarh - Odisha

Tender For providing of custom bid for services - annual maintenance contract of electronic platform scale

State Government

CTN :45613922

03 Jul, 2026 3.58 Lacs

Surat - Gujarat

Tender For providing, supplying and installation with testing demo of additional laboratory equipment for aggregate, cement and mix-design at quality control sub division, rander, dist. surat.- providing and supplying & installation with testing demo of vicat needle apparatus for testing of initial, final seeting time & consistency of cement test. one complete set. confirm to 18:5513 , providing and supplying & installation with testing demo off vicat mould, , providing and supplying & installation with testing demo of vicat glass plate, , providing and supplying & installation with testing demo of le-chatler mould including two glass plates and lead weight as per is set of six., , providing and supplying & installation with testing demo of le-chater flack, , installation with testing demo of slump test apparatus with tamping rod 16 mm dia x 600 mm long graduated., , providing and supplying & installation with testing demo of humidity chamber refrigerated-inner 8.8-45x45x45 cm-92 liter for temperature and humidity control with over temperature protection audio alarm system, , providing and supplying & installation with testing demo of servo voltage stabilizer -3kva-single phase for humidity chamber., , providing and supplying & installation with testing demo of humidifire with controler digital-confirming ito indian standard codes, , providing and supplying & installation with testing demo of whatman fliter paper-40 for blain air permeability test apparatus for fineness of cement, confirming to indian standard codes., , providing and supplying & installation with testing demo of precision electronic balance-600 gmm 01 gm (10mg)-confimming to indian standard codes., , providing and supplying & installation with testing demo of cement morter cube mould-7.06 cm-for cement confirming to indian standard codes (18 10080, 84031), , providing and supplying & installation with testing demo of 90 micron is sleve, , providing and supplying & installation with testing demo of gauging travel 8 anch. (200 mm)-confirming indian standard codes., , providing and supplying & installation with testing demo of temperature meter concrete, , providing and supplying & installation with testing demo of room temperature meter or thermo hygrometer, , providing and supplying & installation with testing demo of tds meter pen type, , providing and supplying & installation with testing demo of ph meter - pen type, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-100ml, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-250ml, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-500ml, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-1000ml, , providing and supplying & installation with testing demo of standard weight box-8.8.-1 mg-200 gm-class f1 (with nabl calibration), , providing and supplying & installation with testing demo of buoyancy balance with electronic balance 10 kg x 0.1 gm, , providing and supplying & installation with testing demo of 1.) distance piece-50mm height-nos 2.) distance piece-30mm, , height-inos, , machine, , providing and supplying & installation with testing, , demo of electronic platform, , balance-100 kg-, , 10 gm platform size 600 x, , , , providing and supplying & installation with testing demo of g.j. tray 1000x 1000 x 50 mm confirming to indian standard codes., , providing and supplying & installation with testing demo of bnd- ordinary portland cement standard specific area (blaine) one set surface, , providing and supplying & installation with testing demo of wash bottle 1000ml, , providing and supplying & installation with demo of spatula testing, , providing and supplying & installation with testing demo of fil

State Government

CTN :45388542

18 Jun, 2026 NA

Titlagarh - Odisha

Tender For corrigendum : providing of custom bid for services - annual maintenance contract of electronic platform scale

CTN :45527654

03 Jul, 2026 NA

Hyderabad - Telangana

Tender For supply of solid carbide reamer dia 2mm shank dia 4 mm min and length 65 mm , solid carbide reamer 45hrc dia 6point5 x fl 28 x oal 101mm , solid carbide reamer 45hrc dia 1point 4 x fl 8 x oal 40 , centre drill type a maximum length in mm 37point 50 pilot dia in mm 1point 6s hank dia in mm4 , centre drill 3point 15x1point 25 length 33point 5mm , two piece construction twist drills parallel shank dia 4point 2mm , 5 steel with case material plastic measuring length m 5tape width mm 19 , 50 linen with case material plastic measuring length 50 m width 12 mm , bore air hose nominal bore size 10mm x length of the pipe 50 meters , bore air hose nominal bore size mm 6point 30 length of the pipe meter 5 , ruled register 200 pages , white pencil eraser , polymers air bubble film width of film in a roll 1000 mm , bosch corded portable drill machine having drilling capacity in steel 13mm 25mm motor power 701 w , pressure sensitive adhesive tapes br 108mmx100 mtr x width 60mm , solar led torch light , transparent polypropylene tape length 50 meter x width 24mm , transparent cellulose tape length 25meter width 12mm , transparent polypropylene tape length 50 meter width 60mm , led diving torch light capacity 10000 mah , camlin cd marker black , camlin bold e permanent marker red , reynolds 4point 0 mm black colour permanent markers , camlin permanent marker blue , cotton yarn waste , surgical face mask , black lead hb drawing pencil , nitrile coated hand glove size 7 to 8 inches m , miranda tool saw blades nominal length of blades mm 300width of blades mm 12point 5 , antimicrobial hand wash 500 ml , high speed steel wood cutting circular saw 650watt with 6variable speed power input in watt 1050 , tape69 vinyl ht tape size 20point 1 meter in roll , lifebuoy liquid toilet soap of 5 liter pack , lr grade acetyle acetone size 24 liter , solid carbide drill dia 8point 8 mm length 100mm , solid carbide drill dia 3 mm length 165mm , carbide drill 4 mm length 75mm , carbide drill 6point 00mm length 93mm , miranda solid carbide drill 6point 5mm length 101mm , miranda solid carbide drill 7mm length 111 mm , carbide drill - 8mm length 117mm , solid carbide drill 11mm length 140mm , nylon 3-strand hawser-laid rope , crepe paper masking tape 18mm , paper masking tape 72mm , black lead b general writing pencil , plastic glue gun 40 watt , polyester round slings 10x6 mtr load capacity 10 tonne , rubber bands 32 mm x 1point 5 mm lxw , high vacuum pump motor power 1 hp rpm 1440 pumping speed 7 cm3 hr , tungsten carbide wood cutting circular saw power input 1200 watt rpm 5500 , ldpe zip lock covers size 3 x 6 , ldpe zip transparent pouch size 5 x 7 , ldpe zip plain pouch size 6 x 8 , ldpe zip pouch size 9 x 12 , electronic platform type weighing scale load capacity 1000kg , bosch pipe cutter with ratchet cutting action , cello hdpe bucket of capacity 25 liters , natural pp round cylinder domestic bathroom mug multi upto 500 ml , plastic stretch wrap film grade 210 , radial drilling machine three phase supply 415 v 50 hz lxwxh 350x850x1825 , bracket mounted fan for wall mounting 400 mm , crane weighing scale of rated load capacity - 100 , plastic measuring mug cup capacity 500 ml , wooden letter writing brush , hdpe bucket of capacity 10 liters , pallet truck 3000 kilogram kg //bid details 2 / 44

CTN :45532261

22 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of tansche - lab equipments for construction practice lab & material testing lab in civil department - purchase, flow table apparatus for concrete with accessories dimensions and specifications as per is 9103, table top made from flat metal plate, minimum thickness 1.5 mm. table top size: 700 mm 700 mm, with flatness tolerance of 1.5 mm. table top marked with: scribed cross at centre, lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top: 16 1 kg. table top, base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface, minimizing bounce. stop watch digital - 2 nos scale 1 mtr 2 nos mounting wooden platform 300 mm height amc for 3 years inclusive. , digital weighing balance -100 kg capacity capacity: 100 kg type: digital weighing balance least count / accuracy: 10 g or better display: led/lcd digital display power supply: ac mains with inbuilt rechargeable battery backup platform: stainless steel, sturdy construction functions: tare, zero tracking, overload indication operating time (battery): minimum 8 12 hours standards: legal metrology approved (preferred)

CTN :45473593

26 Jun, 2026 NA

Jamalpur - Bihar

Tender For supply of electronic platform type weighing scale(general purpose) of rated load capacity - 500 kg andaccuracy as- +/- 0.25% of ro(class 3) as per attached technical specification. [ warranty period: 12 months after the date of delivery ] ]

State Government

CTN :45398397

16 Jun, 2026 1.09 Crore

Tumkur - Karnataka

Tender For short term re-tender for the supply and installation of scientific equipments and others sanctioned under pm-usha grants - ft-ir spectrophotometer with atr and ups for analysis of organic samples, digital balance (4 digit), analytical balance, refrigerated centrifuge, layophilizer, gel documentation system/gel analyzer system for dna and protein analysis, uv visiblespectrophotometer, biosafety cabinet, visible spectrophotometer, soil moisture meter (0-100%), ph meter (361), water distillation unit plant (ddu 1500-borosil), wkm micro channel plastic micropipette kit ktn198 (pack of 3), horizontal laminar air flow, auto clave, binocular microscope, centrifuge (remi), electrophoresis unit, vortex_, olympus biological microscope - binocular led (mx 2li), incubator_, ph meter_, laf (4x2x4), microwave oven_, dslr camera, freezer -16 to -25 oc 350 l capacity, water bath (wbp012-borosil), hot air oven type memmert, rotor spinner, spin win (spiunwin mc-01), soxhlet extractor, conductivity meter (308-systronics), vacuum filter, ice maker, muffle furnace_, digital weighing balance (10 mg to 300 g), heating mantle, magnetic stirrer with hot plate_, micropipette set, lab deep freeze, orbital shekar mc-01 (3050), rotary evaporator, slab gel electrophoresis system, submerged electrophoresis system, tlc chamber, power packed electrophoresis, ph meter microcontroller based, colorimeter_, remi5-mlh magnetic stirrer with hotplate, deep freezer (-20oc), mixer grinder for laboratory, gel-rocker (bench rocker), muffle furnace up to 1200 oc, binocular microscope magnus, sterio microscope olympus sz51, hot air oven htlp 45l, tlc plates plastic based silica gel, trans illuminator (hv-it-20), column chromatography chamber, digital multimeter, laser fiber source 30 w, centrifuge machine, uv cabinet with tube, horizontal gel electrophoresis et- h1 for laboratory, hot air convention oven, refrigerator (double door) for laboratory, muffle furnace 1400 oc (18.5l), camera with high resolution for capturing and video, remi laboratory centrifuge -led 6000 rpm (r 8c plus), benchmark accuris uv transilluminator ac/dc input 230v, semi automatic microphone, platform pad, olympus 10x50 s binocular, remi magnetic stirrer-5lts hotplate (5-ml), airconditioners

CTN :45258678

11 Jun, 2026 3.74 Lacs

Kota - Rajasthan

Tender For corrigendum : supply and itc of electronics platform weighing scale capacity 3 mt for water pre treatment plant clarifier- ii, iii and foreway u 6,7 of cw system of kstps,kota

CTN :45382257

03 Jun, 2026 NA

Hisar - Haryana

Tender For auction for unserviceable articles micro wave oven , servo stabilizer 5 k.v.a vs05 , , gc-3 genei cooler 24 x 0.5 ml tube , flash gel system sr.no. 107573 with flash gel camera , pcr machine (sr no. 482-1513) with 1 k.va uos (sr no. es1101208110) with 9 batteries , autoclave vertical 300 x 500mm li-13 (sr.no. 43110) with automatic pressure control switch and accessories , spin win 6 plate rotor , mini submarine eletrophoresis with casting tray, comb set (15 x 10cm) , electrophoresis vertical mega gel 50 cm (wx) with accessories , referigereator , li control , ph meter , ph meter , elico make , ph meter digital eutech , tutor d two pen type , ph meter , distillation unit ysu-410a, yorco make , laminar air flow (yorco) dm-188-hl-62 (6'x2'x2) with accessories , weighing balance labex fuji digital up to 3.kg model no li-303 g , weighing balance and/ek-400i, 400gxo.1g , rotary mixer rotospin (tarson) , model no. 3090 , 3091 50x1.5 ml , autoclave vertical ysi 402d 300x500mm , water bath liquid cooling microprocessor , controlled l1-133 , 500x 250x250mm , micro centrifuge with rotors non refrigerated , remi/rm-12cdx , angle head (30x.4ml) , rm1241, rm1242 (24x1.5ml), 1261(8x2ml) , refrigerated centrifuge , no.c-24bl , rotors , a) angle head c-244a (8x15ml) , b) angle head r-247 , (8x50ml) , spectrophotometer (uv visible) digital 200-1000nm , transluminator 25x25 md-25 wealtech , uv lamp held 300nm,230v/50hz , platform rocker 11 platform electronic timer genei make no. 107107 , genei digital p5500 power supply with timer constant with current constant voltage digital display (genei no 1061817)

CTN :45363442

06 Jun, 2026 NA

Thanjavur - Tamil Nadu

Tender For purchase of lab items for civil department - boring machine (motorised) engine type: 4-stroke, air-cooled, single-cylinder petrol engine displacement: 196 cc power output: minimum 6.5 7 hp ( 3.5 kw) maximum engine speed: ~3600 4000 rpm starting system: recoil (manual) start fuel type: pure petrol fuel tank capacity: minimum 1.5 1.6 l supported auger bit sizes: 4 , 6 , 8 , 10 , 12 , 14 (100 350 mm) bit material: heavy-duty mild steel with powder coating typical drilling depth: minimum 3.5 4 ft per bit (800 mm 1.2 m) bit coupling: quick-coupling system for easy bit replacements frame: robust tubular steel frame with ergonomic handles and vibration absorbers weight: minimum 20 22 kg (without auger bit) , los angeles abrasion testing machine with counter standards: en 1097-2, 12697-17, 13450; astm c131,c535; aashto t96 description specification: the machine consists of an electronic control unit and a rolled steel drum having an inside diameter of 711 mm and internal length of 508 mm. the drum is rotated at a speed of 31-33 r.p.m. the internal shelf provided with the machine confirms to astm, aashto and en standards. the machine is equipped with an automatic counter, when the preset revolution count is reached, the machine will stop automatically. the drum is equipped with an interlock device which allows the operator to lock the drum into position. , plastic limit apparatus 1.glass plate 20 cm x 15 cm having ground ends and one side frosted. 2.brass or stainless steel rod 3 mm dia x 150 mm long 3.flexible spatula - 8 cm long, 2 cm wide 4.set of 6 moisture containers 5.porcelaine basin 150 mm dia. 6.plastic wash bottle 500ml, weighing balance -100 kg capacity capacity: 100 kg type: digital weighing balance least count / accuracy: 10 g or better display: led/lcd digital display power supply: ac mains with inbuilt rechargeable battery backup platform: stainless steel, sturdy construction functions: tare, zero tracking, overload indication operating time (battery): minimum 8 12 hours standards: legal metrology approved (preferred), flow table apparatus for concrete with accessoriesdimensions and specifications as per is 9103, table top made from flat metal plate, minimum thickness 1.5 mm. table top size: 700 mm 700 mm, with flatness tolerance of 1.5 mm. table top marked with: scribed cross at centre, lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top: 16 1 kg. table top, base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface, minimizing bounce. stop watch digital - 2 nos scale 1 mtr 2 nos mounting wooden platform 300 mm height amc for 3 years inclusive.

Electronic Platform Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government