Latest electronic balance Tenders | Government electronic balance Tenders

State Government

CTN :40398983

04 Jul, 2025 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply, installation and demonstration of micro electronic balance as per annexed specification (annexure-1)

State Government

CTN :40560629

23 Jun, 2025 NA

Amravati - Maharashtra

Tender For supply of laboratory equipments /laptop/printer - flash chromatography system model a1700x-200ml yamazen carporation, japan make, programmable elution modes: isocratic step, linear & rf gradient, pumping flow rate: 5-200 ml/min, maximum pressure: 1.5 mpa (15 bar/217 psi), no. of solvents: use up to 4 solvents in a gradient, uv detection: dual variable wavelength pda uv vis, detector 200-800 nm,uv detector sensitivity: 0.02-10.24 saufs, fractionation modes: time manual, peak, peak& slope (valley)02, automated densitometer with 4 reading channelsmake- genaxy/thistle/cleaverdensitometer a universal densitometer scanner with software capable of reading 144test per min. is available for band quantitation following post electrophoresis staining ordering information-cell as gel application packages equipped with bridges applicator and clinical test kit, 1x4 -specimen semi micro applicator volume applied sample band with compatible strip size: 5.7x14cm, cell as gel wet membrane bridges and densitometer, 1x8.5 cm bridge for 1x5.7x7x14cm or 2x2.5x14cm cell as gel. strip cat no. cslbg8.55 terbo scan software densitometer (excludes computer and scanner) cat no. csldens flat belt scanner for turbo scan software cat no. csscan, uv transilluminatormake- genaxy/thistle/cleaverresearch model: 312nm single wavelength transilluminator for detection of more than 0.1 ng of dna filter area (cm) uv 20 x 20cm , analytical balance make- aczet/radwag/sartoriuscapacity :220gm readability : 0.1mg repairability: 0.2mg response time: 2-3 sec pan size : 90mm display: lcd backlite calibration : motorized internal calibration, probe sonicator (touch screen) with sound proof enclosure make-labman/aczet/sonic temperature indicator and controller touchscreen display - 4.3 inches tft user password protection available microprocessor controlled and completely programmable. large lcd display with time setting. auto-tuning for convenience and optimal processing efficiency. variable power output control. auto frequency tracking output amplitude 0-100% adjustment. automatic fault alarm. frequency 20-25khz-automatic tracking process capacity 0.5-500ml (approx.) probe dia (titanium alloy) standard 6mm (1/4") display 4.3 inches tft display function temperature, power, time, etc. temperature range( c) 0-99 c timer (selectable) yes overload protection yes user password protection available input method touch screen control, data memory 20 groups output power 6.5-650w (adjustable) power supply : ac 220v/50hz, pulveriser/grinder make-ideal/mac/amccommercial dry grinder are used for grinding different types of products like spices, fresh ginger, salt, sugar, leaves, herbal products, cattle and poultry feeds, icing sugar, custard powder, instant food, food colors and allied food production. 3 hp motor deluxe model camber size: 10 x 5 cm. capacity: 20-25kg./hr., decoction apparatus gas operated decoction making machinemake-ideal/mac/amcvessel capacity: 15 liters for 1 to 5 lit production capacity, motor: /1 hp single phase motor fuel: lpg (fitted with i no. burners) all contact parts in 304 grade stainless steel complete structure in mild steel ready to use with all standard accessories wi s.s. bucket 10 ltr., s.s. mesh, & s.s. round tank, cooling centrifuge make-remi/eppendrof/thermo programable compensation for true sample temperature: yes pre cooling: yes acceleration profiles: 9 deceleration profiles: 9 & coasting fast spin: yes display: lcd control communication: digital parameters setting switches: bi-directional encoder brushless motor with frequency drive: yes inverter fault detection with auto shut down: yes cfc free refrigeration system: yes no. of programs: 99 last set parameters recall: yes choice of rpm/ref setting: rpm/rcf digital countdown timer 0-99 min & continuous run: yes automatic rotor identification: yes emergency lid lock release: yes password protection: yes gas hinge to prevent door falling: yes imbalance detection with centrifugatio

CTN :40534248

18 Jun, 2025 3.97 Crore

Kolkata - West Bengal

Tender For supply and application of insulation materials on pipe, equipment for part a and part b as per standard specification by providing all required materials in connection with the composite work for setting upof hpg-2, butene-1 and psa units atlepetkata - legends / notes for insulation workstypes of insulation : ih = insulation for heat conservation it = insulation for steam traced lines is = insulation for personal safety ic = cold insulation for anti-condensation ie = insulation for electrically traced lines ij = insulation for jacketed lines ik = insulation for dual insulated lines basic line surface materials : cs = carbon steel (including lt carbon steel), as = alloy steel, ss = stainless steelnotes :1. for insulation type it,tracer size and tracer numbers shall be as per specification.2. insulation thickness for ic where insulation material is poly urethane foam (puf) / poly isocyanurate (pic) + cellular glass includes outer layer of 50mm of cellular glass and inner layer of balance thickness of puf/pic.3. insulation for ie consists of inner layer of rockwool and outer layer of puf / pic. the thicknesses have been specified as thk(i) and thk(o) for inner and outer layers respectively., part a, hot insulation (units)providing thermal insulation including supply of all insulating and ancillary materials, vapour barrier, weather protective coverings, consumables and other necessary materials , testing of materials as required, including transportation of materials to work site, duly inspected by 3rd party inspector(llyods/bv/dnv or any other client approved party) at manufacturers shop & sample check/inspection at site by eil construction inspector, applying insulation on surfaces as specified including all preparatory work there on, binding, tying, lacing, stitching and/or otherwise securing , finishing with sheet cladding as per spec. , providing bolts, rivets, and self tapping screws wherever specified , providing inspection windows, end seals for flanges etc., colour coding and identification. providing steel scaffolding, all tools , tackles , equipments etc. , labour, supervision and completing the work in all respect, at all heights as per drawings , specifications and instructions of engineer-in-charge. (refer legend for applicable eil specification), insulation type : ih ; surface material : cs & as ; operating temp. range : upto 125 (deg c) ; insulation material : rockwool, pipes, nb 00.75 inches; thickness 25 mm, nb 01.00 inches; thickness 25 mm, nb 01.50 inches; thickness 25 mm, nb 02.00 inches; thickness 25 mm, nb 03.00 inches; thickness 25 mm, nb 04.00 inches; thickness 25 mm, nb 06.00 inches; thickness 25 mm, blind flange assemblies, nb 00.75 inches; thickness 25 mm, nb 02.00 inches; thickness 25 mm, valve assemblies, nb 00.75 inches; thickness 25 mm, insulation type : ih ; surface material : cs & as ; operating temp. range : 126 (deg c) to 350 (deg c) ; insulation material : rockwool, pipes, nb 00.50 inches; thickness 25 mm, nb 00.50 inches; thickness 40 mm, nb 00.75 inches; thickness 25 mm, nb 00.75 inches; thickness 40 mm, nb 00.75 inches; thickness 50 mm, nb 01.00 inches; thickness 25 mm, nb 01.00 inches; thickness 40 mm, nb 01.00 inches; thickness 50 mm, nb 01.50 inches; thickness 25 mm, nb 01.50 inches; thickness 40 mm, nb 01.50 inches; thickness 50 mm, nb 02.00 inches; thickness 25 mm, nb 02.00 inches; thickness 40 mm, nb 02.00 inches; thickness 50 mm, nb 02.00 inches; thickness 65 mm, nb 03.00 inches; thickness 25 mm, nb 03.00 inches; thickness 40 mm, nb 03.00 inches; thickness 50 mm, nb 03.00 inches; thickness 65 mm, nb 04.00 inches; thickness 25 mm, nb 04.00 inches; thickness 40 mm, nb 04.00 inches; thickness 65 mm, nb 06.00 inches; thickness 40 mm, nb 06.00 inches; thickness 65 mm, flange assemblies, nb 01.50 inches; thickness 25 mm, nb 01.50 inches; thickness 50 mm, nb 02.00 inches; thickness 25 mm, nb 02.00 inches; thickness 40 mm, nb 02.00 inches; thickness 50 mm, nb 03.00 inches; thickn

Central Government/Public Sector

CTN :40158795

09 Jun, 2025 79.00 Lacs

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of geo technical engineering laboratory equipment - laboratory c.b.r. test apparatus - digital and computerized , soaking tank for cbr moulds , rapid moisture meter , automatic soil compaction machine , motorized sieve shaker , humidity chamber , beaker - 500 ml cap. , beaker- 1000 ml cap. , electronic balances - 5 kg , electronic balances 10 kg , sand pouring cylinder - small and large , is test sieves brass frame 20cm dia , is test sieves brass frame 30cm dia , digital microprocessor direct shear apparatus , automatic computer controlled digital tri-axial shear test app with pressure volume controller , and analysis software for cu, uu, cd test , laboratory oven with digital temperature , permeability -soil constant head and falling head , dynamic cone penetrometer , constant rate of strain consolidation testing , consolidation apparatus , liquid limit motorized, plastic limit, shrinkage limit , digital swell test apparatus , digital unconfined compression tester , infrared moisture meter

CTN :40513009

06 Jun, 2025 15.00 Lacs

Jodhpur - Rajasthan

Tender For supply of lab equipment - lab equipment, microscope with camera : should have observation method including brightfield and darkfield, should be illuminated with transmitted illuminator and led lamp, should have stage focusing mechanism with coarse handle stroke of 15 mm, should have features for coarse adjustment limit stopper and torque adjustment for coarse adjustment knob, should have field trinocular diaphragm, should have revolving nosepiece with manual with 4 standard positions , should have manual stages with right-hand control having built-in x: 76 mm, y: 30 mm, should have built in manual abbe condenser na 1.25/ w.d. - (4x 100x), standard (fn20) observation tubes-trinocular should be included, should have 30 tube inclination angle or equivalent, trinocular tube light path selection (camera: observation) :0%:100%, 100%:0%, should have interpupillary distance adjustment: 48 75 mm, dimensions (w d h): trinocular: 198 (w) x 398 (d) x 430 (h) mm, weight should be not more than weight: approx. 6.5 kg, compact design, should be supplied with 15 mega pixel or more camera attachment and computer to visualize sample, should be supplied with dust cover complete set. with c-mount stand, camera, computer, should have microscope camera software and image processing system, computer system should contain desktop (minimum 12th gen intel core i3, ram minimum 8gb, windows 11, ms office 2021, wi fi 6, bluetooth 5.2 monitor minimum 18 inch and above, fhd, ips display, eye comfort), keyboard and mouse for operating microscope, service and operation manuals to be provided; warranted for 1 years or more after satisfactory installation., magnification lens with light: magnifier is made of high quality glass. white energy-efficient led bulbs. the glass lens magnification 3x to 45x magnification. the large lens diameter 87 mm handle length 4.1 inch, digital weighing scale: electronic balance should have the following functionality, upto 220 g capacity; 0.001 g readability; brilliant display; internal calibration; robust construction; easy levelling; maximum capacity: 220 g, minimum load: 10mg, readability: 0.1 mg or better, settling time: 6 s or better, adjustment: internal, display: backlit lcd, weighing pan size: upto 90 mm , micro processed based digital display with on/off mode, build with die-cast aluminium material, should have adjustable feet for uniform levelling. should be iso, ce certifiedshould provide user, technical manuals to be supplied in english language, it should have interface rs232, service and operation manuals to be provided; power supply: ac 230v/115v,50/60hz, warranty -1year or more, authorization letter, hot air oven : double walled unit with inner chamber of stainless steel, outer chamber of mild steel duly powder coated. temperature thermostatically controlled range: 50 c to 200 c 1 c. beaded heating elements are placed in the ribs at the bottom and sides mineral /glasswool insulation, capacity: 200ltr or more, corrosion resistant body for longer life, air circulation fan for better heat circulation and dry of sample, complete with l shape thermometer, two indicators, thermostat and on / off switch, microprocessor based pid temp. controller cum indicator, adjustable selves: 2 or more, inner dimensions: 600 x 600 x 600mm or more, it should have concealed ss handle and positive latch system. controller should be equipped with timer, auto tuning and alarms. supply voltage: 230 v ac, 50 hz, single phase. should have local service setup for prompt and efficient post-sales support. warranty 1 year or more, muffle furnace: unit should be suitable for laboratory, it should be fitted with good quality tiles set, with ceramic fibred insulation. unit capacity: 4 litre or more, outer casing of thick mild steel duly painted / powder coated. working temperature ranges from 50 c - 1150 c is controlled by digital temperature cum indicator with e. r. control device for fine control. dimension should be compact: 125 x 125 x 250 mm, u

Central Government/Public Sector

CTN :40492137

17 Jun, 2025 NA

Raigad - Maharashtra

Tender For supply of electronic balance

Central Government/Public Sector

CTN :40441853

12 Jun, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of electronic balance platform size 600mm x600 mm cap 0-150 kg 50gm accuracy , electronic balance single pan cap 200-220 gm accuracy 1 mg , electronic balance table top type cap 6kg least count 1 gm

Central Government/Public Sector

CTN :40272554

06 Jun, 2025 NA

Hyderabad - Telangana

Tender For supply of electronic balance platform with high precision

State Government

CTN :40204148

02 Jun, 2025 31.19 Lacs

Multi City - Karnataka

Tender For supply of laboratory equipments and research equipments under idp 2023-24 / call - 3 - ultrasonic sonicator, abbe refractometer (digital), ice making machine/ice chillar (20kg per 24 hr), kbr pellet making machine (automatic 15 tons) , programmable high performance temperature muffle furnace 1200 degree c , magnetic stirrer , centrifuge , glass electrode for ph meter, ph meter, colorimeter , monocular self illuminating microscope magnus or equivalent, weighing balance 3 decimals wensar or equivalent, electroblotting unit brand techno or equivlent , apparatus for the study of b h curve of ferromagnetic materials, mscw - energy gap of semiconductor experimental set-up, gamma radioactive sources set nucleonix or equivalent), beta radioactive sources set (nucleonix or equivalent), mscw - power supply (transformer) for sodium vapour lamp, uv vis spectrophotometer, ph electrode, digital conductivitymeter model eq-660b ( equittronics or equivalent), digital potentiometer model eq-606( equiptronics or equivalent) , uv chamber , rotary microtome , rotary vacuum evaparatour , mscwa- colorimeter, digital tds, labomed microscope , ph meter- digital, centrifuge remi or equivalent 10000 rpm , gel electophoresis verticle, electrophoresis power pack unit, gel electophoresis horizantal, mscw -binocular microscope, homogenizer, haemoglobinometer, glucometer, centrifuge with timer, led digital microscope with battery backup, digital personal weighing balance, digital high precision weighing scale kerro or equivalent, compound microscope with 10x 45x 100x and 5x objectives, tri ply splender tadka pan 13 cm 550ml ss cookware prestige or equivalent, ss 1ltr deep frying vessle borosil, ss 1ltr cooking utensil borosil or equivlaent, paper electrophoretic unit, sahlis hemoglobinometer, neubeur blood counting chamber, hair dryer, micropipette, triple beam balance, electrophoretic unit(horizontal), microwave oven, mscw - digital colorimeter, compound microscope, centrifuge (remi r-8c), uv-visible spectrophotometer (200-1200nm), mscw - colorimeter, mscw - mini centrifuge, mscw - pressure cooker 20 litres, mscw - pressure coocker 10 litres , weighitng mechine 2 decimal digital, colorimeter wavelength range 400-700 nm labotronics or equivalent, electroporesis power pack (50-300v 200ma) tarsons or equivalent, electroblotting unit techno or equivaent, ic regulated power supply, 0-5 1a, ic regulated power supply 0-30v 1a, power supply (transformer) for sodium vapour lamp, cathode ray oscilloscope dual channel 20mhz, mscw - travelling microscope bridge type, spectrometer , quantum efficiency of photodiode study kit, verification of stefan - boltzmann law kit, meterbridge, energy gap of semiconductor experimental set-up, fermi energy of copper kit, function generators digital (upto 1mhz), digital balance upto 3 digits., refractometer , conductivity cell, calomel electrode, platinum electrode, electric oven , elctrical centrifuge machine, electric bunsen burner, digital potentiometer, digital conductometer, digital colorimeter, mscw - analog cro dual channel 20 mhz make aplab or systronics or retrack, digital dc milliammeter (with at least one decimal point reading) (atleast 100 ma), digital dc/ac voltmeter (with at least one decimal point reading), microcontroller als 8051 trainer kit, function generator (upto 1 mhz that generates sine/square/triangular wave), decade capacitance box (5 or 6 dials) (1 pf to 10 micro f), decade resistance box (5 or 6 dials) (1 ohm to 1 m ohms)

Electronic Balance Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government