Latest electronic billboard Tenders | Government electronic billboard Tenders

corporations/Associations/Others

CTN :45517423

18 Jun, 2026 7.32 Lacs

Alwar - Rajasthan

Tender For opetation and maintenance of street lights with material at industrial area keshwana amounting to rs 7.32 lakh - operation and maintenance of led lights with material on contract basis on various roads of ind area including operation of on/off switches/panel boards, replacement of all the necessary electric items etc. complete in all respect as per enclosed terms and conditions (1 to 43)., regular operation & maintenance of high mast light with material having 12 nos. of led flood lights of 200 watt each including its panel and the material in it e.g. timer, contactors, wires, cable etc. in all respect. the work has to be executed as per the direction of engineer in-charge.

CTN :45512690

02 Jul, 2026 4.28 Crore

Visakhapatnam - Andhra Pradesh

Tender For supply of 25vkpc006 c c - brush bracket assembly for 19 kw motor , fan , sw temp gauges , sight glass part no. 06001 avail.as com.as.kit-item-209 , set shut-off valve nw38 part no. 08398 , set of gaskets for condenser 20tr ac plant for ekm submarine , tube for evaporator for 20 tr ac plant for ekm submarine , 3 way isolation valve for pressure gauges , refrigerant piping fittings 20tr ac plant for ekm submarine , rear outer bearing cover , sw pressure gauges , temperature gauge 100 dial -30 to 50 deg c , starter cum control panel for20tr ac plant for ekm submarine , terminal connectors with din rail 35 wago 6 sq mm 282-101 , synthetic ref oil savsyn2068 , gasket cover window he side , gasket cover window filter side , gasket cover top hsg dist. block , gasket cover top hsg manifold block , nut hex m24x3 , bolt hex std m20x2.5x120l , fan , compressor discharge temp gauge , compressor suction temp gauge , mccb merlin gerin 160 a 4 pole ns160n 4p30640 coil 24v dc , starter card elmot for 45 kw dc panel , terminal block for 5.5 kw motor , core for filter drier , rubber bellows for sw pump discharge , rubber bellows for sw pump suction , shaft for sw pump , mechanical seal for sw pump , pressure gauge 65 dial -1 to 15 kg-cm2 for r134a , oil seperator danfoss oub 4 for 2 x 2.1 tr ref plant , sea water pump be pump a3610m for 2 x 2.1 tr ref plant , solenoid valve danfoss evrs3-24 vdc coil , thermo exp valve sporian w je-80 jc charge 1-5-8x1-5-8inch ods , rotor setl/d 1.45 part no. n0900408030 , metaflex coupling for compressor for 144 tr ac plant , valve check type 125 nb wafer type , core for filter drier sporian rc10098 , thermostatic expansion valve danfoss teat 85-33 , shock mount irmra akcc-400e , valve plate assembly part no-08436 , set shaft seal part no 08008 , set oil pump part no 08044 , set piston dia 70 part no 08035 , set gaskets part no 08072 , set connecting rod part no 08307 , set oilsump heat 80w 220-240v part no 08425 , set capacity regulator 24 v dc , set of v belts , oil separator danfoss oub 4 for 2 x 2.1 tr refrigeration pla , valve angle type 1-2inchntp(m) x 1-2inch flare , safety valve 1-2inchnpt m set pressure 12.5 kg-cm2 r134a , valve angle type 1-4inch ntp m x 1-4inch flare , thermostatic exp valve gfe-1-2jc charge 1-4inch x 1-2inch flare , thermostatic exp valve gfe-1.1-2jc charge 1-4inch x 1-2inch flare , vibration eliminator 5-8inch ods , vibration eliminator 1-1-8inch ods , temp switch danfoss rt34-25 to 15 deg c , hrc fuse link ge ns4 4a with nh type fuse base , control transformer tape wound 415 v/110 v 150 va , filer drier core , safety valve condenser , liquid injection solenoid valves , hex head screw m6x125l , lp-op cutout mp55r r12-r22 , horizontal shell and tube type condensor , brazed plates type direct expension r134a evaporator , safety relief valve for condensor , thermostatic expansion valve , open end spaner set , temperature transducer , compressure suction pressure gauge , compressore discharge pressure gauge , element complete with o ring , pump trailing pompe pollard type 100 pr-60-100 c-g-n , direction of control valve with manual override

State Government

CTN :45482296

13 Jun, 2026 49.9 Thousand

Nadia - West Bengal

Tender For notice for the vbgram materials supply - supply of first aid box including medicines (specified by pia) at, model citizen information board for ibs( specification-made of, with a height of 3ft, width 2ft and thickness of 4 inch & 30 degree, head with pentagonal shape including fixing the mgnrega, biswa bangla logo in upper side of the board and supply in, mgnrega worksite anywhere., model citizen information board for community (specification-, of brick structure with plastering and colour ( back colour, and black for writting) with a height of 4ft, width 3ft and thickness, 4 inch & 30 degree in head with pentagonal shape including fixing, the mgnrega and biswa bangla logo in upper side of the board, supply in the mgnrega worksite anywhere., g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., other local wood, supplying, fitting & fixing factory made p.v.c. door frame of size, mmx47 mm with a wall thickness of 5 mm, made out of extruded, mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china foot rests 250x125x25 mm, ptmt - towel rail (600 mm), fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, hydraulic door closer tuular type aluminium section body, anodiesd aluminium hanging type door stopper, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated, factory made solid panel pvc door shutter consisting of outer, made out of m.s. tubes of 19 gauge thickness and size 19 mmx19, mm for styles, top and bottom rails, m.s. frame shall have cost, steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame, made of flat bent bar, end bifurcated with necessary screws etc., cement concrete(1:2:4) as per direction. (cost of concrete will be, paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured, from extruded section conforming to i.s. specification (i.s. 205/66), and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x, 4.0mm, anodised aluminium barrel / tower / socket bolt (full covered) of, approved manufactured from extruded section conforming to i.s., 204/74 fitted and fixed with cadmium plated screws: (vi) 200mm, long x 10mm dia. bolt., anodised aliminium d-type handle of approved quality, manufactured from extruded section conforming to i.s. specification, (i.s. 230/72) fitted and fixed complete: (a) with continuous plate, base (hexagonal/ round rod) (iii) 100 mm grip x 12 mm dia rod., (c) supplying 6 levers 'godrej' crystal satine mortice lock with keys, including fitting & fixing complete., i) iron hasp bolt of approved quality fitted and fixed complete, (oxidised) with 16mm dia rod with centre bolt and round fitting. (, 200mm long, door stopper.(brass), red lead primer for steel grill, interior premium imulsion(plastic paint), exterior imulsion weather coat paint, distemper paint, supply of upvc pipes (b type) (for soil pipe purpose) & fittings, conforming to is-13592-1992 (a) (i) single socketed 3 meter length, (c) 160 mm, (ii) plain tee for soil pipe purpose. (c) 160 mm, v) plain y for soil pipe purpose. (c) 160 mm, supplying, fitting & fixing upvc down pipes a- type and fittings, conforming tois:13592-1992 with all necessary clamps nails,, including making holes inwalls, floor etc. cutting trenches in any soil, through masonry concrete, structures etc if necessary and mending good damages including, joining withjointing materails (spun yarn, valamoid/bitumen/m-seal, etc) complete. a) upvc pipes: (ii) 110 mm. dia., s, d) shoe (ii) 110 mm. dia, qgs seed(10 variety), g.i. hollow pipe squre or

CTN :45457878

17 Jun, 2026 3.36 Lacs

Subarnapur - Odisha

Tender For new ib building at sonepur_building - finishing wall with weather coat of approved quality two coats to give an even shade with brush to outside wall surface after cleaning surface including cost of paint watering and curing cost conveyance and taxes of all materials and labour,cess with t&p required for the work etc. complete in all floors., providing and fixing chequred tiles in floors, treads of steps and landing on 25mm thick bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, t&p and cess etc. complete in all respect as per specification and direction of the engineer-in-charge., 32mm piasal wood or local teak wood panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect. but excluding the cost of iron fittings., providing, fitting & fixing up partition walling oel aluminium anodised section no. 9210 and 9207 as single groove and double groove respectively as horizantal and vertical member and oel section 4660 as tapered clip for fixing up 12mm thick prelaminated board (nova pan make) and jointing angle no.1855 etc.(12mm thick novapan prelaminated bead), fly ash brick masonry in c.m (1:6) including cost conveyance royalty of all materials., providing 12mm thick cement plaster (1:6) over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of engineer-in-charge., providing c.c. (1:2:4) using 12mm size hard granite crusher broken chips including all cost carriage royality taxes and all labour involved for the completion of item of work as per direction of engineer- in - charge., dismantling and removing doors, windows and ventilatoras including removal of frame,hinges and stacking the same for re-use and removing the debris within 50mtr lead etc complete., supplying, fitting & fixing of window (sliding type made up alminum section) 151-154,151-155, as windows frame section no.151-155, 151-153 nad 151-167 as shutter framw with 5mm thcik black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour t & p etc complete as per direction of enginner -in charge., providing , fitting & fixing of al. door with oel anodized al. door section of 9202 aas vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick prelaminated board in botttom portion fixed on door frame by means of tapered clip no.4660 and frame to be completed bt means of jointing angle no.1855 including all cost of labour t & p hire charges of drilling machine labour charges etc complete.

CTN :45430790

18 Jun, 2026 NA

Ariyalur - Tamil Nadu

Tender For supply of mechanical engineering lab materials - mechanical engineering lab materials, serve motor drive kitinterface l293d motor driver ic with arduino to control direction of rotation of two dc motors), bldc motor kitbldc motor 1 nobldc motor drive -1noinbuilt volt and ammeter and rpm meterinbuilt power supplyinput 230v ac, lvdt trainer kit complete educational trainer for linear variable differential transformer (lvdt) displacement measurement. built-in ac excitation source and signal conditioning circuitry for lvdt operation. micrometer assembly for precise linear movement of the lvdt core. displacement range ~10 mm with clear front-panel adjustments for zero & calibration. digital display (typically 3 -digit) for direct readout of conditioned output/displacement values. test points and banana sockets for signal observation on external instruments. self-contained unit in a durable enclosure with labeled controls and educational layout. includes user manual and patch cords for experiments. operates on 230 v ac, 50 hz mains supply., multi-cylinder petrolphase : single phase load: mechanical load with ropenumber of cylinders : 4displacement : rope brakepower : 65hp,4000 rpm,1396 ccbrand material : mild steelengine type : 4 stroke self startfrequency : 15hzfuel consumption : petrolfuel tank capacity : 5 letermorh s test rig, tail stock assemblyheavy-duty lathe tailstock assembly for training; cast iron body with base, barrel (quill) ~50 75 mm stroke, hand wheel feed, dead centre mt2/mt3, set over screws for taper turning, spindle clamp, complete with all internal parts for dismantling and reassembly; suitable for 300 400 mm centre height training lathe., dc motorvoltage 220-440 v dcpower - 180 w speed - 200 rpm, hydraulic cylinderdouble acting hydraulic cylinder, bore 40 50 mm, stroke 200 300 mm, working pressure up to 100 160 bar, steel tube with honed bore, hard chromed piston rod, front & rear end caps, piston with seals and wear rings. supplied as standalone unit with suitable mounting for dismantling, inspection and reassembly., hydraulic opreated directional control valve (dcv)manually operated 3/2 or 4/2 way spool type hydraulic directional control valve, nominal size ng06 (cetop 3) or equivalent, rated pressure 210 bar, flow 20 40 lpm; valve body with hardened and ground spool, centering springs, ports p a b t clearly marked. supplied on small mounting plate for dismantling, inspection and assembly practice., bearing with shaft assemblyteaching unit with shaft 25 35 mm dia mounted in housing with deep groove ball bearings (6205 / 6206 class) at both ends; includes locking arrangements (circlips, lock nuts, covers). designed for repeated removal, cleaning, lubrication and refitting of bearings, with provision to mount on bench or test rig., coupling unit using driving and driven shaft plumber block bearing unit1. the plummer block housingmaterial: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing).sealing: felt seals or v-ring seals (to demonstrate lubrication retention).lubrication: provided with a grease nipple at the top center for manual lubrication practice.2. the bearingtype: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series).bore diameter: standard 25mm or 30 mm (ideal for lab scale).mounting: adapter sleeve mounting (h-series) to teach students how to lock a bearing onto a smooth shaft.3. shafting and couplingshaft material: ground carbon steel (en8 or en9) for high surface finish.coupling type: * flexible coupling: to demonstrate the bearings ability to handle slight misalignment.rigid flange coupling: to demonstrate traditional direct connection.driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., spring test machine load & displacement sensing load cel * capacity: 0 10 kno accuracy: 1% fs (better if 0.5% fs) displacement sensor * lvdt / digital encodero accur

State Government

CTN :45447017

11 Jun, 2026 NA

Nadia - West Bengal

Tender For supply of item rate e-quotations for various types of mgnrega materials as per annexure-i under tehatta-ii development block - item rate, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket bol

Central Government/Public Sector

CTN :45406404

15 Jun, 2026 NA

Bhusawal - Maharashtra

Tender For provision anemometer (controller and alarm indicator) with display panel 4-20 ma for system telemetering to count wind speed at sub sectioning & paralleling post (ssp). anemometer should be compatible for reading wind velocity & direction, graphic display, velocity range - 0 to 180 kmph, accuracy - 0.2m/sec., direction 0 to 360 degree. (supply, installation, testing & commissioning and including necessary modification in ssp & rce suitable for connecting with m/s. synergy system solution rtu having modbus or rs485/rs232 communication port (cup type anemometer required) [ warranty period: 12 months after the date of delivery ] ]

CTN :45386599

15 Jun, 2026 NA

Tuticorin - Tamil Nadu

Tender For purchase of lab equipments for eee dept - purchase of lab equipments for eee dept, single phase transformer.itemcode:b002 single phase transformer,rating: 1 kva, 50 hz, input: 230 v acoutput: 115 v ac,type: air-cooled, single-phase step-down transformer properly insulated input and output terminals brought out for safe operation)., acidity test kit itemcode:b005specifications:ethyl alcohol sodium carbonate solution universal indicator solution laboratory-grade test tubes droppers colour comparison chart for test result comparison chemicals supplied in labelled containers with safety instructions suitable for laboratory educational and testing applications, dc stepper motor drive kit with stepper motoritemcode:b010specifications:stepper motor : permanent magnet / hybrid type with suitable driver circuits. motor operating voltage : 12 24 v dc variable speed control forward and reverse direction control full step and half step operation manual / automatic pulse generation facility built-in regulated dc power supply led indication for phase sequence and status test points provided for waveform observation start / stop control switches to be provided overload and short circuit protection to be provided mounted on compact powder coated cabinet withprinted circuit diagram proper insulated terminals and interconnecting leads to be provided patch chords for interconnection, dc servo motor drive kit with servo motor itemcode:b011specifications:input supply : 230 v ac, 50 hz servo motor type : dc servo motor with feedback arrangement motor operating voltage : 12 24 v dc controller type : microcontroller based servo drive controller speed control : variable speed control to be provided position control : angular position control facility to be provided direction control : forward and reverse operation feedback device : encoder / potentiometer based feedback system built-in regulated dc power supply led indications for power and status test points to be provided for signal observation and analysis start / stop control switches provided overload and short circuit protection to be provided mounted on powder coated cabinet with printed circuit diagram proper insulated terminals and interconnecting leads to be provided, three phase resistive load itemcode:b013specifications:rating: 5.25 kw supply: 415 v ac, 3-phase, 50 hz total number of load steps: 6 main switch to be provided approximate dimensions: 18 18 22 inches (l b h) comprising special cement-insulated electrical load resistors mounted on powder-coated ms panel/enclosure individual on/off rotary switches for load selection mounted on rubber wheels/casters for portability suitable for laboratory load testing applications proper insulation, ventilation, and earthing arrangement to be provided, single phase single pulse / sinusoidal pwm inverter using mosfet/igbt kit itemcode:b028specifications:type : single phase pwm inverter trainer power device : mosfet / igbt based inverter circuit input supply : 12 24 v dc output voltage : 30 v rms ac output phase : single phase output frequency : 0 50 hz variable output power : 100 w single pulse pwm operation sinusoidal pwm (spwm) operation variable frequency control pwm generation and firing control circuit inbuilt gate drivercircuit provided test points provided for waveform observation and analysis built-in resistive load provision, on / off control of lamp using solid state relay kit itemcode:b029specifications:type : solid state relay (ssr) trainer kit control/input voltage : 12 v / 24 v dc or up to 30 v dc output load voltage : 230 v ac, single phase load control : on/off control of ac lamp load solid state relay based switching circuit opto-isolated input control built-in ac lamp load manual on/off switching arrangement led indication for input and output status, speed control of ac motor using vfd drive module with ac motor itemcode:b030specifications:type : variable frequency drive (vfd) module input supply : 415 v ac, three phase, 50 hz o

Central Government/Public Sector

CTN :45374834

12 Jun, 2026 9.95 Lacs

Cachar - Assam

Tender For repair/ maint of lt over head line, lt pole and busbar with connected accessories at hq igar (e) srikona. - schedule a part - i, supply test & commissioning lt ug cable xlpe insulated sheathed and armoured, with aluminium stranded conductor, lt 1100 volts grade of size 25 sqmm 3.5 core, complete including execavation, sand cushioning , protecting covering and retuning filling all as specified and as directed., supply test & commissioning lt ug cable xlpe insulated sheathed and armoured, with aluminium stranded conductor, lt 1100 volts grade of size 35 sqmm 3.5 core, complete including execavation, sand cushioning , protecting covering and retuning filling all as specified and as directed., supply test & commissioning lt ug cable xlpe insulated sheathed and armoured, with aluminium stranded conductor, lt 1100 volts grade of size 50 sqmm 3.5 core, complete including execavation, sand, sushioning, protecting covering and returning filling all as specified and as directed., supply test & commissioning lt ug cable xlpe insulated sheathed and armoured, with aluminium stranded conductor, lt 1100 volts grade of size 70 sqmm 3.5 core including execavation, sand, sushioning, protecting covering and returning filling all as specified and as directed., m&l for preparation of surfaces of pole for painting of steel tubular pole,vertical with one coat of aluminium paint incluing painting black and white strip or as ordered by engineer-in-charge on poles and numbering with writing letters or figures(block) complete all as directed., s&f street light control panel confirming to ip 66 protection mounted on wall/pole/pcc foundation with suitable ms clamps & nut bolts etc installation and testing including 01 no mcb tpn 63 amp (incomer),01 no contactor 63 amp 3 pole , 230v 3p module astronomical time switch , bakelite fuse fitting with 2 a hrc fuse,indicaion lamp,mounting lugs,panel lock,hinged door,auto manual selector switch 6 amp, detachable mounting din channel,supply monitoring device complete all as specified and directed, supply and fix high efficient ip-66 led street light 70 watt with high power leds, having aluminium pressure die cost housing and pc cover in the front and lens for light distribitioon and saving of energy efficient including service bracket and making of fixing arrengement all as direct by engr -in-charge., labour only for stringing loose lt line alumunium conductors as per direction of engr- in -charge, supply and fixing lt line separator 1100 volts of approved brand and quality, supplying and erection of 100 mm x 65 mm pin insulator complete with g. i. spindle and nuts etc as required .

State Government

CTN :45375477

06 Jun, 2026 5.29 Lacs

Idukki - Kerala

Tender For state plan- works under nedumkandam section-state plan 2024-25 - energy efficiency improvement, optimization of electromechanical items, safety audit and ensuring safety in operation of wtps and pump houses- rwss to udumbanchola - supply, e - cost of materials & working charges, od70149/2024-2025:1. pump & motor -supply, erection, testing and commissioning of kwa pre-qualified reputed make centrifugal pump set with bronze/ss impeller, ss shaft and ci pump casing etc. complete. the duty condition is as follows, discharge - 6 lps & total head - 92m, the motor is tefc squirrel cage induction motor suitable for the above pump working with 3 phase, 50 hz, 415 v shall confirm to eefi/is 325 etc. complete including providing suitable concrete foundation including cost of cement., sand and metal etc. flexible coupling shall be used for coupling of pumps and motors. 2. starter - supply, erection, testing and commissioning of suitable rating fullu automatic star delta starter with air break contact starter suitable for the above motor with over voltage and under voltage protection, single phase preventer, over load relay with motor protection relay with main contactor and bypass contactor as per ie rules and code of practice etc. complete. 3. panel board (suitable) for operating pump sets (but one pump set at a time) - supply, erection, testing and commissioning of cubical type floor mounted ms fabricated dust and vermin proof common control panel board consisting of 1 no. suitable capacity mccb as incomer and 2 nos of suitable capacity mccb as out going (the two mccbs are interlocking with each other) providing suitable size aluminium bus bar inter connect the above mccbs and fitted with 3 nos of indicator lamps, 1 no. volt meter with selector switch, 1 no. ammeter with selector switch etc. complete and provided with a common earth bus for the entire panel and inter connect with the mccbs as per ie rules and code of practice. the panel shall be fitted on a common base frame on suitable foundation. 4. cabling work - supply, laying, testing and commissioning of suitable size cables for the above pump set from panel board to starter and from starter to motor , considering energy conservation. 5 .earthing - supply of all materials and providing suitable earthing by using suitable size pipe/plate earthing gi/copper strip buried in ground and giving double earthing to motor, starter, panel board etc. as per ie standards. 6. capacitor - supply, erection, testing and commissioning of heavy duty app capacitor for the motor to get a power factor above 0.95. the capacitor shall confirm to is 2834 . 7. valves - supply of suitable size best quality heavy duty isi marked ci double flanged sluice valve and non return valve with suitable pressure rating 8. suction and delivery pipe connections - the size of the suction pipe is suitable as per the site condition with a max length of 7.5m. suitable size foot valve connecting at the suction pipe bottom etc. complete and connecting the delivery side of the pump with the valves and suitable specials to connect with the pumping main.warranty 2 year (1 year warranty+ 1 year additional warranty), od109714/2024-2025:dismantling the existing old damged pump by disconnecting the cables, 15.2.1:demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in-charge.nominal concrete 1:3:6 or richer mix (i/c equivalent design mix), 4.3.1:centering and shuttering including strutting, propping etc. and removal of form work for:foundations, footings, bases for columns, 5.1.3:providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), 5.22.6:steel reinforcement for r.c.c work including straightening, cutting, bending, placing i

Electronic Billboard Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government