Tender For auction sale of depot non ferrous scrap - scrapped s&t cables and hdpe ducts. (1)signalling cables copper -1.5sqmm(2c,4c,6c,8c) and 5c 2.5sqmm armoured copper cable. (2) telecom cables : copper telephone (20,50 and 200 pairs)clock pas cctv (co axial), power cables,fiber cables-fots (48 cores and it (6 cores). (3) hdpe ducts -40/50 sqmm dia of both signalling and telecom system. note: (i) minimum quantity to be lifted per day= 9 mt. (ii) total nos. of days for lifting complete lot= 04. i) this item comes under the category of hazardous and other waste and its sale shall be made only to an authorised actual user or authorised waste collector or an authorised disposal facility who have been authorised by state pollution control board/cpcb/ministry of environment, forest and climate change under hazardous and other wastes (management & transboundary movement) rules, 2016. therefore, participating bidders must hold valid authorization/registration certificate from spcb/cpcb/moefcc. this authorization/ registration certificate must be valid both at the time of bidding as well as at the time of lifting of material.ii) firm shall also submit a certificate/undertaking in regard to the total hazardous waste purchased/collected and processed for the current financial year till the time of auction.iii) original authorisation/registration certificate as well as the passbook issued to purchaser by spcb/cpcb along with authorization shall be required to be produced at the time of taking delivery. handing over of the hazardous and other wastes to the purchaser shall be only after making of the entry into the passbook of the purchaser by the depot officer of dmrc custodian.iv) the entire arrangement for transportation of the lot shall be made by the purchaser and the responsibility of safe transport of hazardous and other wastes as per provisions of hazardous & other wastes (management & transboundary movement) rules-2016 shall lie entirely on purchaser.v) the purchaser (receiver) shall also ensure the necessary authorisation for transport from concerned spcbs and this aspect shall be clearly stated in transport manifest (movement document) issued by department of dmrc handing over hazardous and other waste scrap to the purchaser. before taking delivery the purchaser shall submit documents/details to depot officer of custodian to show that (a) in case of transportation of hazardous and other waste for final disposal to a facility existing in a state other than the state where the waste is generated, he has obtained no objection certificate from the spcbs of both the states (b) in case of transportation of hazardous and other waste for recycling or utilisation including co-processing, he has given intimation to both spcbs (c) in case of transit of hazardous and other waste for recycling, utilisation including co-processing or disposal through a state other than states of origin and destination, he has given prior intimation to concerned spcb of states of transit.vi) the purchaser shall also ensure that the transport manifest system (movement document) for hazardous and other waste prepared by the depot officer of dmrc custodian as per provisions of hazardous waste management rules is followed. he will also give an undertaking that the relevant copies of the transport manifest (movement document) (as per colour code prescribed in the hazardous waste management rules shall be duly signed by him as well as by the transporter arranged/nominated by him and proper disposal of each signed copy of the transporter shall be ensured by him as well as by the transporter arranged/nominated by him for lifting the lot. also the acknowledgment copy of the transport manifest (blue copy) shall be provided by him to dmrc within 07 days of lifting a lot.
Tender For supply, installation and commissioning of pre-wired modular workstation consisting of a single control office customized to equip two sads and two daws systems arranged and installed on a t-shaped modular workstation with integrated cable management systems as per specifications. specifications of modular workstation: 1) the workstation shall each be of 5 feet (l) x5 feet (w) the combined size: 10 feet (l) x 5 feet (w) - 1set, made of 25 mm nfc wood and 1 mm acrylic laminate. 2) the sads displays shall be installed such that the bottom edge of the display is at a height of 5' (approximate) from the floor. these shall be installed preferably along the longer edge of the t and facing the operators, 3) the daws system shall be installed such that it is possible to be used sitting at the workstation. 4) all interconnecting wiring for lan, power supply and telephones shall be done inside the cable management system (powder coated aluminium interlocking extrusions) and adequate ports shall be provided on the work surface. communication accessories: i) lan rj45: 4 nos ii)telephone, rj11 : 4 nos iii) power supply, 5 amp sockets: 6 nos 5) all wires shall be brought out to interface boxes one for power supply and another for the communications cables. these boxes shall be designed to accept connections from the control room circuits. note: design, supply, fitment, installation, testing and commissioning shall have to done by the firm confirming to the pre-wired modular t- shaped workstation standards. material shall confirm to hpl/nfc engineered wood (25mm thickness) as per epd-ies-0012055:002 (s-p- 12055) certification. make: godrej interio/tumbi/greeken/moudulartek or its equivalent. [ warranty period: 30 months after the date of delivery ] ]
Tender For the works include providing electrical supply, networking and telephone supply through cable management system of size(50mm x 100mm). estimation based on 2022 dsr with ci of 1.3424.
Tender For expression of interest document for pre bid selection of consortium partner for procurement of ict equipment along with supply installation for seoc at usdma building it park dehradun - core network switches , supply installation testing commissioning of core switch as per technical specifications and corrigendum updates/clarifications , supply installation testing commissioning of sfp+ module for 10g , access network switches - (for poe & non- poe devices) , "supply, installation, testing & commissioning of access switch 48 port non- poe, as pertechnical specifications and corrigendum updates/clarifications" , "supply, installation, testing & commissioning of access switch 48 port poe+ as pertechnical specifications and corrigendum updates/clarifications" , wireless networking , "supply, installation, testing & commissioning of virtual wireless controller (software)as per technical specifications and corrigendum updates/clarifications" , "supply, installation, testing & commissioning of wireless indoor access point as pertechnical specifications and corrigendum updates/clarifications" , "supply, installation, testing & commissioning of wireless outdoor access point as pertechnical specifications and corrigendum updates/clarifications" , wireless networking , ip telephony appliance based system (minimum 500 end-user lic support including ip phones, video phones and sip h.323 based video conferencing devices. hardware, software and voice gateways shall be from same oem for better interoperability), and will also include 1 pc based console for operator) , supply, installation, testing & commissioning of helpdesk operator wired headsets , "supply, installation, testing & commissioning of fusion room operator wireless hands- free headsets forsoftphone working" , "supply, installation, testing & commissioning of unified communication (uc) system with softphone support and250 user licenses" , supply, installation, testing & commissioning of basic type-i sip phones features a color display, 3 context-sensitive soft keys, and fixed function/navigation buttons. , supply, installation, testing & commissioning of vip (premium) sip telephone with 7- inch or larger color touch screen with a 2mp or 1080p hd camera, supporting one or more sip accounts and 3-way conferencing. features hard function keys for essential call controls and a secondary gigabit ethernet port for desktop/laptop connectivity , supply, installation, testing & commissioning of pc based console for operator , router , "supply, installation, testing & commissioning of standalone / modular router, as pertechnical specifications and corrigendum updates/clarifications with 5 year support." , firewall , "supply, installation, testing & commissioning of utm firewall as per technical specifications and corrigendum updates/clarifications. shall have 32 gb or higher ram and 800 gb nvme ssd storage and wil provide 5 gbps firewall throughput, 3 gbpsipsec throughput, 5 gbps ips throughput or more and 5 gbps nextgen firewall throughput including firewall" , dns security , "supply, installation, testing & commissioning of dns security solution for minimum 150users" , active power factor filter (apff/ahf) , "supply, installation, testing & commissioning of active power factor filter with ct kit(150 a)" , ems , supply, installation, testing & commissioning of element management systems. , nac , nac (appliance + 100 licenses) in ha , hci servers , supply installation testing commissioning of 4 hci nodes for dc across 1 clusters , supply installation testing commissioning of 4 hci nodes for dr across 1 clusters , microprocessor based transient voltage surge suppression (tvss) system with reset facility high/low voltage protection , "supply, installation, testing & commissioning of microprocessor based transientvoltage surge suppression (tvss) system with reset facility high/low voltage protection" , rodent repellent s
Tender For procurement of ict equipment along with supply and installation for establishment of state emergency operation centre (seoc) at usdma building, it park, dehradun - procurement of it equipment for u-prepare(rates must be quoted incl. gst and applicable cms as per bid document), core network switches, supply installation testing commissioning of core switch as per technical specifications and corrigendum updates/clarifications, supply installation testing commissioning of sfp+ module for 10g, access network switches - (for poe & non- poe devices), supply, installation, testing & commissioning of access switch 48 port non- poe, as per technical specifications and corrigendum updates/clarifications, supply, installation, testing & commissioning of access switch 48 port poe+ as per technical specifications and corrigendum updates/clarifications, wireless networking, supply, installation, testing & commissioning of virtual wireless controller (software) as per technical specifications and corrigendum updates/clarifications, supply, installation, testing & commissioning of wireless indoor access point as per technical specifications and corrigendum updates/clarifications, supply, installation, testing & commissioning of wireless outdoor access point as per technical specifications and corrigendum updates/clarifications, wireless networking, ip telephony appliance based system (minimum 500 end-user lic support including ip phones, video phones and sip h.323 based video conferencing devices. hardware, software and voice gateways shall be from same oem for better interoperability), and will also include 1 pc based console for operator), supply, installation, testing & commissioning of helpdesk operator wired headsets, supply, installation, testing & commissioning of fusion room operator wireless hands-free headsets forsoftphone working, supply, installation, testing & commissioning of unified communication (uc) system with softphone support and250 user licenses, supply, installation, testing & commissioning of basic type-i sip phones features a color display, 3 context-sensitive soft keys, and fixed function/navigation buttons., supply, installation, testing & commissioning of vip (premium) sip telephone with 7-inch or larger color touch screen with a 2mp or 1080p hd camera, supporting one or more sip accounts and 3-way conferencing. features hard function keys for essential call controls and a secondary gigabit ethernet port for desktop/laptop connectivity, supply, installation, testing & commissioning of pc based console for operator, router, supply, installation, testing & commissioning of standalone / modular router, as per technical specifications and corrigendum updates/clarifications with 5 year support., firewall, supply, installation, testing & commissioning of utm firewall as per technical specifications and corrigendum updates/clarifications. shall have 32 gb or higher ram and 800 gb nvme ssd storage and wil provide 5 gbps firewall throughput, 3 gbps ipsec throughput, 5 gbps ips throughput or more and 5 gbps nextgen firewall throughput including firewall, dns security, supply, installation, testing & commissioning of dns security solution for minimum 150 users, active power factor filter (apff/ahf), supply, installation, testing & commissioning of active power factor filter with ct kit (150 a), ems, supply, installation, testing & commissioning of element management systems., nac, nac (appliance + 100 licenses) in ha, hci servers, supply installation testing commissioning of 4 hci nodes for dc across 1 clusters, supply installation testing commissioning of 4 hci nodes for dr across 1 clusters, microprocessor based transient voltage surge suppression (tvss) system with reset facility high/low voltage protection, supply, installation, testing & commissioning of microprocessor based transient voltage surge suppression (tvss) system with reset facility high/l
Tender For corrigendum : supply of traffic lights underground red for ugmcs system , make sheetal , traffic lights underground green, for ugmcs system , make sheetal , traffic management rtu panel , for ugmcs system , master controller for under ground communication , telephone gateway for motorola repeater , diffused photo sensor, for ugmcs system , signal cable 1000 meter , cat 6 cable , 4core x 4 sq mm armored power cable. , 42ah battery as backupfor power supply , server computer, make dell, model intel xeon e 2224g processor , 43inch monitor for cctv , dc dc converter 12 v dc to 48 v dc, 5 a , smps input 240 vac to 24 vdc output , dc dc converter 12 v dc to 24 v dc, 24v 2.1a , 24vdc to 12vdc smps for motorola base station xirm8668i , dc dc converter 24vdc to 5vdc, 5v 3a , wireless charger , active rfid humen tag lether cover , programming laptop with all licensed , coaxial coring stripping tool , mega drop cable stripper , coaxial cable cutter , single phase, double pole 6 amps c mcb , single phase, double pole 16 amps c mcb , single phase, double pole 32 amps c mcb , 25 a double pole 30 ma rccb , bm 101 power supply , 15 amps, make axiom , radio modem , 8 tb surveillance hard disk , coaxial center conductor cleaner , spd, ac power surgespd, ac power surge ) /bid number : gem/2026/b/7406560 * /dated: 09-04-2026 & & / bid document 1 / 35
Tender For supply, erection & installation of 't' shaped modular workstation having two keyboard pullout trays, two cpu trolleys, two storage encase metal pedestals, two ergo footrest and also provided with integrated cable management as per specification details mentioned below. 1) two workstations, each shall be of 5 feet( l) x 5 feet (w) x 4 feet(h) and the total combined 't' shaped modular workstation size: 10 feet(l) x 5 feet(w) x 4 feet(h) = 01 set(which is made up of 25 mm hpl/nfc engineered wood & 1 mm acrylic laminate). 2) all the interconnecting wiring for lan, power supply and telephone wires shall be done inside the cable management system(powder coated aluminium interlocking extrusions) and adequate ports shall be provided on the work surface. 3) standard communication & power accessories :- i) lan rj45 ports : 4 nos ii) telephone rj11 ports : 4 nos iii) power supplies 5 amp. sockets : 6 nos 4) all wires shall be brought out to interface boxes as one for power supply and another for the communication cables. these boxes shall bedesigned to accept connections from the control room circuits. 5) modular workstation material shall confirms to hpl/nfc engineered wood(25mm thickness) or its similar as per epd-ies-0012055 : 002 (s-p-12055) certification or latest if any. note:(1)firm shall quote any one make for the tendered description along with valid authorization, if vendor offers/bids for more than one make or if the firm mentions, 'as per tender' in their bid(s), their offer will be summarily rejected. (2) tenderer must submit technical leaflets/ details of the offered material like make & model no. along with their offer, otherwise such offers are liable for rejection. [ warranty period: 30 months after the date of delivery ]
Tender For supply & fitting of modular workstation with integrated cable management system each 5' * 5' making the total size to 10' * 5' workstation should be equipped with lan rj45 : 02 nos. , telephone andrj11 port: 02 nos. and power supply socket 05 amps: 03 nos. make:- das enterprise or similar. [ warrantyperiod: 30 months after the date of delivery ]
Tender For providing of facility management services - lumpsum based - industrial mines area; assistance in day to day maintenance of telephone lines, internet lines-lan network and other e&t-system department work at block b project; consumables to be provided by service p..
Tender For supply, erection & installation of 't' shaped modular workstation having two keyboard pullout trays, two cpu trolleys, two storage encase metal pedestals, two ergo footrest and also provided with integrated cable management as per specification details mentioned below. 1) two workstations, each shall be of 5 feet( l) x 5 feet (w) x 4 feet(h) and the total combined 't' shaped modular workstation size: 10 feet(l) x 5 feet(w) x 4 feet(h) = 01 set(which is made up of 25 mm hpl/nfc engineered wood & 1 mm acrylic laminate). 2) all the interconnecting wiring for lan, power supply and telephone wires shall be done inside the cable management system(powder coated aluminium interlocking extrusions) and adequate ports shall be provided on the work surface. 3) standard communication & power accessories :- i) lan rj45 ports : 4 nos ii) telephone rj11 ports : 4 nos iii) power supplies 5 amp. sockets : 6 nos 4) all wires shall be brought out to interface boxes as one for power supply and another for the communication cables. these boxes shall bedesigned to accept connections from the control room circuits. 5) modular workstation material shall confirms to hpl/nfc engineered wood(25mm thickness) or its similar as per epd-ies-0012055 : 002 (s-p-12055) certification or latest if any. note:(1)firm shall quote any one make for the tendered description along with valid authorization, if vendor offers/bids for more than one make or if the firm mentions, 'as per tender' in their bid(s), their offer will be summarily rejected. (2) tenderer must submit technical leaflets/ details of the offered material like make & model no. along with their offer, otherwise such offers are liable for rejection. [ warranty period: 30 months after the date of delivery ]