Latest electronic control panel Tenders | Government electronic control panel Tenders

Central Government/Public Sector

CTN :40793643

02 Jul, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : tender for supply of uhf transceiver terminal , uhf radio , uhf power amplifier-los with fsu , uhf power amplifier-satcom , uhf antenna-los , uhf antenna-satcom , uhf interface unit , remote control unit , mss transreceiver terminal m-ii , ac-dc power supply unit , remote interface unit , ethernet switch , headset , handset , control card , led green , led red , display control card , fsu control card , presure vent , 0/p cable , two pole mcb , control card , display card , digital voice card , data control card , fuse holder , fuse (3a) , mother board , display control card , slide (set) , shock mounts for rack , dual directional coupler , driver amplifier , dual directional coupler 1 , dual directional coupler 2 , rf cable assembly set , dc-dc converter , lan adapter mrj-5780-01 , pcb sru 3003 with blower and battery , lemo connector , pre controller module , gps receiver card , audio switch card , mss tx/rx terminal m-ii

CTN :40916762

22 Jul, 2025 15.45 Lacs

Visakhapatnam - Andhra Pradesh

Tender For supply of poly studio g62 video conferencing system with mounting plate kit and bluetooth remote control , poly g62 poe adapter cbi-india , poly studio e60 power accessory , poly studio e60 camera 4k mptz with 12x zoom , poly studio e60 eagleeye iv hdci camera display mounting bracket , poly g7500ip table microphone , poly active usb cable three point one cable ten m , display unit

CTN :40855921

14 Jul, 2025 NA

Tiruvallur - Tamil Nadu

Tender For supply of 05 types of items c c - jumper 188 70 085cbcb , jumper 188 70 086cb acb , jumper assy 172 70 253cb cb , cable and harness to drg no hvf blt t72 70b , remote control unit pb 82 to drg no 172 70 192 cb 1cb

CTN :40855958

14 Jul, 2025 NA

East Khasi Hills - Meghalaya

Tender For sitc of video conferencing device and related items - project execution av system setup and testing , custom indoor visual display panel , display sync processor , compact computing device , 65 inch interactive display unit , full hd remote controlled ptz camera , chairperson microphone console , participant microphone console , centralized av conference control unit , high clarity wall speaker , medium power audio amplifier , wall mountable 6u cabinet with ventilation , online power backup unit , multi port hdmi signal splitter , long length 4k hdmi transmission cable , high end portable workstation , b and w multifunction print-scan copy unit , custom connectors cabling and interface kit

Corporations And Associations And Others

CTN :40865657

04 Jul, 2025 8.52 Lacs

Delhi - Delhi

Tender For supply of electrical material for day to day use in mvid hospital. - supply of 1.5 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 2.5 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 4 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 6 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 10 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, 16/0.20 mm (0.5 sqmm) twin circular, frls pvc sheathed, workshop flexible copper cable, supply of 3mm thick phenolic laminated sheet as required, supply of s.p. 5/6 a, one way switch, piano type isi marked, supply of 3 pin 5/6 a socket outlet, piano type isi marked each, supply of s.p. 15/16 a, one way switch, piano type isi marked, supply of 6 pin 15/16 & 5/6 a socket outlet, piano type isi marked, supply of s.p. 5/6 a, one way switch, modular type isi marked, supply of 3 pin 5/6 a socket outlet, modular type isi marked each, supply of s.p. 15/16 a, one way switch, modular type isi marked, supply of 6 pin 15/16 & 5/6 a socket outlet, modular type isi marked, supply of 1200 mm sweep, bee 5 star rated, ceiling fan with brush less direct current (bldc) motor, class of insulation:b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope,copper winding, power factor not less than 0.9, service value (cm/m/w) minimum 6.00, air delivery minimum 210 cum/min, 350 rpm (tolerance as per is : 374-2019), thd less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 v, 50hz, single phase ac supply, earthing etc. complete as required., supply of led tube type luminaire 20 watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient leds with the following:(a) total system wattage 20 watt +/- 5%(b )luminous efficacy lumens/watt >=95 (c)power factor >=0.95, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*10 sqmm, 25 amp modular spmcb, c curve, supply of 3 pole mccb, 125a, 16ka, supply of 3 pole mccb, 200a, 25ka, s/o aluminium lugs for 35 sq. mm cable, supply of following size heavy duty exhaust fan complete with arms, blades ring work on 220/240 volt ac supply etc as required.300 mm, 1400 rpm, s/o aluminium lugs for 25 sq. mm cable, s/o aluminium lugs for 16 sq. mm cable, s/o aluminium lugs for 95 sq. mm cable, s/o aluminium lugs for 120 sq. mm cable, s/o aluminium lugs for 185 sq. mm cable, s/o aluminium lugs for 240 sq. mm cable, s/o of mccb sheet metal enclosure, 4p, 100-125a

Corporations And Associations And Others

CTN :40865660

04 Jul, 2025 9.13 Lacs

Delhi - Delhi

Tender For supply of electrical materials for day to day maintainance of ei in balak ram hospital. - supply of 1.5 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 2.5 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 4 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 6 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 10 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, 16/0.20 mm (0.5 sqmm) twin circular, frls pvc sheathed, workshop flexible copper cable, supply of 3mm thick phenolic laminated sheet as required, supply of s.p. 5/6 a, one way switch, modular type isi marked, supply of 3 pin 5/6 a socket outlet, modular type isi marked each, supply of s.p. 15/16 a, one way switch, modular type isi marked, supply of 6 pin 15/16 & 5/6 a socket outlet, modular type isi marked, supply of 1200 mm sweep, bee 5 star rated, ceiling fan with brush less direct current (bldc) motor, class of insulation:b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope,copper winding, power factor not less than 0.9, service value (cm/m/w) minimum 6.00, air delivery minimum 210 cum/min, 350 rpm (tolerance as per is : 374-2019), thd less than 10%, remote or electronic regulator unit for speed control andall remaining accessories including safety pin, nut bolts, washers, temperature rise=75degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 v, 50hz, single phase ac supply, earthing etc. complete as required., supply of led tube type luminaire 20 watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient leds with the following:(a) total system wattage 20 watt +/- 5%(b )luminous efficacy lumens/watt >=95 (c)power factor >=0.95, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*10 sqmm, supply of 3 pole mccb, 125a, 16ka, supply of 4 pole mccb,400a, 50ka, s/o aluminium lugs for 35 sq. mm cable, supply of following size heavy duty exhaust fan complete with arms, blades ring work on 220/240 volt ac supply etc as required.300 mm, 1400 rpm, s/o 25 amp modular spmcb, c curve, s/o aluminium lugs for 25 sq. mm cable, s/o aluminium lugs for 16 sq. mm cable, s/o aluminium lugs for 95 sq. mm cable, s/o aluminium lugs for 120 sq. mm cable, s/o aluminium lugs for 185 sq. mm cable, s/o aluminium lugs for 240 sq. mm cable, s/o modular base & cover plate for 1 module, s/o modular base & cover plate for 2 module, s/o modular base & cover plate for 3 module, s/o modular base & cover plate for 4 module, s/o modular base & cover plate for 6 module, s/o modular base & cover plate for 8 module, s/o modular base & cover plate for 12 module, s/o modular bell push, isi marked, s/o stepped type modular fan regulator (2 module), s/o call bell/ buzzer, single phase

CTN :37651616

29 Aug, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of 22bk6c002 internal communication sys type focon 128 - mating connector , fo cable connecor/bst1-m128 , rotary switch , fo cable/so12t-04-62m , loudspeaker , cpl. , thwincom headset , thwincom uhf portable transceiver , thwincom charger (battery quick charger) hqc120 , swan-neck microphone lbd 3320/10 , swan-neck microphone , accu li-ion 7.2 vdc , 1700 mah , node control unit / ncu00c , node control unit , remote small terminal rst16cx012

Central Government/Public Sector

CTN :40810006

07 Jul, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of radio remote control system with handheld single step push button type transmitter to operate eot cranes similar to model no f24-12s of m/s telecrane and as per the following specification. 1. each system shall consist of 1 no. transmitter with antenna and 1 no receiver with antenna 2. transmitt er to be supplied with alkaline batteries of suitable capacity. 3. transmitter to be supplied with suitable shock absorbing elbow guard. 4. material of pendant ( transmitter) and receiver: nylon fiber. 5. frequency range: it shall be license free and programmable 6. typical operating range: 100 meters 7. environment protection: ip 65 or better 8. operating voltage of receiver unit: 110 vac/220 vac 9. programming: the supplier shall programme the receiver unit input and output channels as per the user requirement. 10. color of pendent (transmitter) body : yellow / orange 11. the remote control pendant (transmitter) shall h ave 11 single step push buttons, key switch for on/off function, mushroom type emergency stop push button, start push button and cable sleeve. 12. dimensi on of the transmitter shall not exceed 186x61x51 mm and weight shall not exceed 300 gms. 13. dimension of the receiver shall not exceed 200x162x51 mm and weight shall not exceed 1500 gms. ]

State Government

CTN :40756934

02 Jul, 2025 10.04 Lacs

Agartala - Tripura

Tender For supply and installation of some articles to the residential office of the honble deputy speaker, tripura legislative assembly, bardowali, agartala during the year 2025-26 - providing of split type high wall 2.00 tr (rated cooling capacity should not be less than 6,000 kcal/hr or 24000 btu/hr or 7000 kw) split a.c. machine with inverter compressor technology operating on non-cfc refrigerant (r-410a/r-32/equivalent refrigerants) suitable for wall mounting conforming to is:1391 (part-ii) specification (evaporator & condenser must be of pure copper) not less than 3 (three) star rating (latest standard), operates on single phase 230 volt, 50hz, ac supply maximum current drawn 11.0 ampere, including supply of 3.0 mtr copper pipe (both for suction & liquid line), 3.0 mtr 4 (four) core electrical connecting cable, remote control unit in/c batteries, 16 amps power top etc complete, capable of performing a) cooling b) dehumidifying c) air circulation d) filtering as per direction of the engineer-in-charge., standard installation of 1.5 tr/2.00 tr capacity high wall split air conditioner i/c providing of electrical plug top of required capacity, flling up/ repairing of drilled portions by cement mortar, painting etc. as per direction of the engineer-in-charge., fabrication of m.s. platform for placement of condensing unit by using m.s. angle of (50x50x5) mm size base plate, nuts & bolts or cradle of suitable sizes i/c painting, fitting, fixing grouting by cement mixer as per direction of the engineer-in-charge., providing hard pvc pipe of best quality of 25 mm diameter including necessary clamping and fitting for draining of condensate water from indoor unit as per direction of the engineer-in-charge., supply and installation of additional length of copper pipe of suitable diameter for suction and liquid line between indoor and outdoor units (for 1.5 tr & 2 tr ac) beyond the standard length as per direction of the engineer-in-charge. (if required), providing and connecting electric control cables between mcb to indoor/outdoor. 3c x 2.5 sq. mm copper cable., supplying & fixing of 1200 mm sweep white color ac ceiling fan capacitor type double ball bearing complete with 300 mm down rod, canopies, shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm pvc insulated copper conductor cable(fr) (isi marked, bee 1 star/minimum service value 4.0 m /min/w): -, supplying and fixing of 20 mm dia extra down rod (gi pipe medium guage) with necessary hole for installation of ceiling fan as required., wiring for light/fan/ exhaust fan/ call bell point with 2x1.5 sq. mm pvc insulated copper conductor cable (fr) in pvc conduit (medium gauge) recessed in slab/ walt complete with 6/10 amps modular type switch, cover plate, gl box including necessary connection etc. as required, supplying and fixing of the following modular accessories including necessary connection etc. as required 3/6 pin 16/20 amps socket outlet (2m), supplying and fixing of the following modular accessories including necessary connection etc. as required4 step fan regulator (1m), supplying and fixing of the following modular accessories including necessary connection etc. as required20/25 amps single phase motor starter switch (2m), wiring for circuit/sub-main with the following sizes pvc insulated copper conductor cable (fr) in pvc conduit (medium gauge) recessed in slab/ wall etc. as required, earthing with 40 mm dia g.i. earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top cl cover plate size 12"x 12" having locking arrangement including cc work, holes on earth pipe etc. as required, proving and fixing/drawing of 4.06 mm dia (8 swg) g.i. 10 wire on surface or in existing g.j/pvc/ polythene pipe for loop earthing as required., executive desk with return unit, size: 2100(w)x 2250(d) x 750 (h) mm, executive revolving chair, visitor chair, godrej 4 door bookcase (1742 h x 914 wx 320 d) mm

CTN :40044356

03 Jul, 2025 NA

Delhi - Delhi

Tender For corrigendum : procurement of spares for mi-series helicopter - antenna unit, ac generator, transmitter with unit stg a-23b, receiver unit, sealing ring, transistor, armature, toggle switch t3, nozle guide vanes, movable system, gum, voltage fraq converter, blanking, switch, transformer, sensitive meter, remote control, spring, bearing, hose, ball bearing, load weight, micro switch, spring, lock screw, thrust bearing, valve, bearing, dial, rod

Electronic Control Panel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations And Associations And Others

Corporations And Associations And Others

Central Government/Public Sector

State Government