Get complete information related to latest Electronic Control Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Electronic Control Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Electronic Control Tenders.
Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t
Tender For supply, install and commissioning of induction heater similar to precision induction heater model pih2002 (8kva) with swing arm arrangement and intelligent micro controller based electroniccontrol, 415v, 50hz with remote for operation with standard accessories. infrared remote, horizontal yoke, magnetic temperature probe and pair of hand gloves. make-skf/gm/fag/ precision or equivalent, as per attached annexure. [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of spares kit for sil make air dryer of 3-phase electric loco consisting of 04 items in 04 nos. as follows:- (1) pressure switch, ri drawing no. gg17-ad-126-00 or sil part no. 09871901 or sil part no. 06401450001, qty-1 no. (2) electroniccontrol module, ri drawing no. gg17-ad-127-00 or sil part no. 09872401 or wabco part no. 653351, qty-1 no. (3) drain valve assembly, ri drawing no. gg17-addv-02 or or sil part no. 09890101 or wabco part no. 308969, qty-1 no. (4) purge valve right, ridrawing no.gg17-adpr-01 or sil part no. 09890201 or wabco part no. 308970, qty-1 no. [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of apfc capacitor bank panel - supply, instalation and commissioning of apfc capacitor bank panel with apfc relay with automating load control panel of 1250 kvr trail testing of apfc panel and outgoing supply of feeder will be connection and load trial. as per bellow detail specification make- l & t details of fabrication of panel cubical- free standing floor mounted with ismc chanel base 100x50x5mm front oprated indoor type ip44, powder coated, color-siemens gray ral-7035)hardwae, gasket,door lock, wiring, ferul etc sheet 2.2/1.6mmmm crca. note - 1-1- panel will be ms fabricated and powder coated as per industry standard, 2-all wires will be used fire proof standard. 3-the paneles muist be of iec/nec standards.4- all type of modification of old bus duct as per requiredment of sit.5- panel coolling axial fan 8inch/panel illumination lamps/thermo stat-30-90 degree.6-apfc relay microprossessor based-16 stage.7-acb used mdo 1.5g microprossessor based release uv., supply, instalation and commissioning with all bolts ,angle and supporting tool & takel with hardware as per requirerment of new aluminium bus bar grade- e91e with ducting, cap. 2,500 amp + 0.8 pf. all necessary conection will be done. make: hendalco
Tender For notice inviting limited tendernotice no: 01/elect./2026/ 706 date:- 10.06.2026tools & equipments of –electrician trade- heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle, , knife double bladed electrician, , chisel firmer with wooden handle, , grease gun, , (a) crimping tool, , wire cutter and stripper, , hacksaw frame, , tweezers, , drill hand brace, , plane cutters, , smoothing cutters, , file flat rough, , file flat bastard, , file rasp, half round, , the soldering gun, , contactor & auxiliary contacts (rm), , contactor & auxiliary contacts. (rm), , pin type, shackle type, egg type & suspension type insulators including hardware fitting, , portable electric drill machine, , load bank (lamp/heater type), , brake test arrangement with two spring balance rating, , laboratory type induction coil, , series test lamp (rm), , knife switch dpdt fitted with fuse terminals (rm), , knife switch tpdt fitted with fuse terminals (rm), , miniature circuit breaker (rm), , earth plate (rm), , earth electrode (rm), , elcb and rccb (rm), , fuses (rm), , rheostat (sliding type), , capacitors (rm), , various electronic components (rm), , various lamps (rm), , plug socket piano switch lamp, , holder (rm), , cables:, , twisted pair, , non-metallic sheathed cable, , underground feeder cable, , ribbon cable, , metallic sheathed cable multi-, , conductor cable coaxial cable, , direct-buried cable (rm), , rubber mat (rm), , electrician helmet, , rcc pole with accessories (ms angle iron, 'c' clamp, stay insulator etc.) and materials, , quipment, , ohm meter; series type & shunt type, portable box type, , digital multi meter, , a.c. voltmeter m.i. analog, portable box type housed in bakelite case, , milli voltmeter centre zero analog, portable box type housed in bakelite case, , ammeter mc analog, portable box type housed in bakelite case, , ac ammeter mi, analog, portable box type housed in bakelite case, , weight wattmeter analog, , (b) frequency meter (digital), , magnetic flux meter, , tachometer, , tong tester / clamp meter, , megger, , single phase variable auto transformer, , growler, , ac starters: :- -, , f. star delta starter soft starter, , g. auto transformer type, , oscilloscope dual trace, , function generator, , discrete component trainer, , linear i.c. trainer, , digital i.c. trainer, , domestic appliances -, , g. mixture & grinder, , h. washing machine semi-automatic, , i. motor pump set, , oil testing kit, , battery charger, , current transformer, , potential transformer, , 1 5 or 17 computer or latest version, , d.c. shunt generator with control panel, , motor-generator (ac to dc) with control panel, , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker, , dc series motor coupled with spring balance load with control pannel, , dc shunt motor with control pannel, , dc shunt motor with control pannel, , dc compound motor with starter and switch with control pannel, , motor generator(dc to ac) set consisting of - shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed, , plate, fixing bolts, foundation bolts and flexible coupling., , ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load., , ac phase-wound slip ring motor with starter switch, , universal motor with starter/switch, , synchronous motor with accessories like starter, excitation arrangements., , thyristor /igbt controlled d.c., , motor drive with tacho-generator feedback arrangement, , thyristor/igbt controlled a.c. motor drive with, , single phase transformer, core type, air cooled, , three phase transformer, shell type oil cooled with delta/ star, , electrical machine trainer -, , diesel generator set with changeover switch, ov
Tender For corrigendum : supply of providing and laying of painting works , patch works , waterproofing works , dismantling false ceiling , dismantling bison board , dismantling woden partistion , window closing , dismantling existing washbasin , cleaning , room 3 , providing toilets , toilet renovation works , roofing and false celing works , room 9 , floor patch works , dismantling of toilets , dismantling damaged windows , room 14 15 , dismantling existing doors , repairs to existing ventilator windows , dismantling existing wall and floor tiles , structural repair and opening modification works , dismantling brick structure and floor repair , dismantling and vegetation removal , dismantling existing broken and damaged glass panes , cpvc water supply line , site clearance and general demolition works , anti termite treatment , rodent and pest control treatment , overhead water tank cleaning repair and disinfection , storm water drain and surface drainage , signage and room identification , comprehensive checking of 1 nos 250 kva outdoor type substations including inspection , aluminium paint , servicing of existing 11 kv 400 amps 3 pole gang operated type air break ab switch , supplying and replacing damaged or worn out copper metal , supplying and replacing damaged or defective 11 kv post top insulators , supplying and replacing damaged or defective 11 kv pin type insulators , servicing of earth pits , supply installation testing and commissioning lbs , xlpe insulated aluminium conductor armoured ht cable , providing indoor or outdoor type heat shrinkable , supplying and laying of 3.5 core x 240 sq.mm 1.1 kv grade aluminium conductor xlpe insulated , supplying and making end termination for 3.5 core x 240 sq.mm 1.1 kv grade , joint for existing single run lt power cable of size 3.5 core x 240 sq.mm , comprehensive servicing and preventive maintenance of existing ht transformer , supply, fixing, installation, testing and commissioning of lightning arrester , providing and fixing cable identification tags , supply, installation, testing and commissioning sitc main mv panel , supply, installation, testing and commissioning sitc cubicle pdb panel , supply, installation, testing and commissioning sitc feeder pillar box , providing and installation of maintenance free earthing station , supplying and laying of 3.5 core x 120 sq.mm 1.1 kv grade aluminium conductor xlpe insulated , providing laying and fixing of overhead perforated or slotted ms cable tray , supply installation testing and commissioning 7 segment distribution board , providing fabricating supplying, installing testing and commissioning of electrical socket box
Tender For purchase of 36-point alarm annunciator fascia window for 220kv feeder panel with associate circuitry suitable for input contacts carrying 220-volt dc (overall, fascia size dimension 150 mm x 660 mm) at 220kv gss, rvpn, bhinmal.
Tender For corrigendum : repair/replacement of feeder pillar box, busbar, lt panel, earthing and repair/replacement to security lights, street lights, gate lights, high mast and controlling panels at omq and golf areas at hqtc bangalore