Web Analytics Made Easy - StatCounter

Electronic Controller Tenders

Get complete information related to latest Electronic Controller Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Electronic Controller Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Electronic Controller Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

State Government

CTN :45626472 Due date: 06 Jul, 202606 Jul, 2026 2.41 Lacs
Tender For corrigendum : work contract for availing expert services for inspection, testing and rectification of m/s bhel make esp electronic controller and its optimization, tunning, troubleshooting and ios to reduce stack emission of 210 mw atps, mppgcl, chachai

CTN :45708877 Due date: 27 Jul, 202627 Jul, 2026 NA
Tender For corrigendum : supply and commissioning of fire detection unit testing jig, supply:230 v ac 1ph, provision of 25 pin connector with 24 volt supply, visual indication of normal state and fault state, audio and visual indication of alarm state 1 and alarm state 2, dpm for air flow sensor signal display. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45682143 Due date: 08 Jul, 202608 Jul, 2026 NA
Tender For supply of electronic controller card (pcb) for 110 v bldc railway carriage fan as per rdso specification no. rdso/pe/spec/tl/0021/2005, rev-2 or latest. sensor less with interchangeability features. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45675374 Due date: 09 Jul, 202609 Jul, 2026 NA
Tender For auction sale of others - 1 control terminal block 16 mm 03 nos. 2 hp/lp cut out 05 nos. 3 scrap scroll compressor 10 nos. 4 scrap blower motor, 1.5 hp, 1400 rpm with top 18 nos. 5 scrap condenser fan motor, 1 hp, 1400 rpm with top 18 nos. 6 ss welded round guard 03 nos. 7 dryer filter (1.5¿ solder type) 29 nos. 8 hartige ( coupler) connector 24 pin 46 nos. 9 hartige ( coupler) connector 16 pin 20 nos. 10 dumper actuator 5 nos. 11 male female plug and socket for dumper actuator 5 nos. 12 pressure transmitter ( 0-10 bar) 20 nos. 13 pressure transmitter ( 0-40 bar) 26 nos. 14 glass bulb cartridge 130 degree 59 nos. 15 scrap esti switch assembly with cartridge 9 nos. 16 air heater set consisting 400 watt ( 15 nos.) coil with insulated backelite sheet 3 nos. 17 scrap low pressure control switch (auto reset) 38 nos. 18 scrap high pressure control switch (auto reset) 50 nos. 19 scrap control pressure switch (auto reset) 24 nos. 20 expansion valve 22 nos. 21 hp gauge (0-40 bar) 13 no. 22 lp gauge (0-10 bar) 13 no. 23 set point generator switch 5 nos. 24 top cover (part-i inside) 4 nos. 25 hygrostat 35-100% 8 nos. 26 scrap compressor contactor -type ls-1 bk 00 dc 110 volt 44 nos. 27 scrap condenser motor contactor -type 1.54k10e dc 110 volt 37 nos. 28 scrap blower motor contactor -type 1.54k10b dc 110 volt 27 nos. 29 dc-dc converter for flapper motor, 110 v/24 v , 1.5 amp 3 nos. 30 bottom cover (part-i inside) 4 nos. 31 electronic controller (srmc-20) 5 nos. 32 top cover (part-ii inside) 4 nos. 33 multifunctional monitoring relay, 750 volt 33 nos. 34 scrap dc-dc converter , 110 v/24 v, 20 amp/1.5 amp 20 nos. 35 return filter, fresh air cassette filter 73 nos. 36 scrap bush bearing clutch plate, commutator, carbon brush holder including carbon 4 nos. 37 bottom cover (part-ii outside) 4 nos. 38 b-check kit for dg 14 set 39 solenoid switch of self-starter 2 nos. total ferrous - 958 kg total copper - 71 kg

Central Government/Public Sector

CTN :45638486 Due date: 14 Jul, 202614 Jul, 2026 NA
Tender For supply of visual indication unit for indicating tm current for wag7 locomotives as per rdso modificaiton sheet no. elrs/ms/339 rev.0.make: e.e.i.c (or) equivalent. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45568626 Due date: 24 Jun, 202624 Jun, 2026 NA
Tender For supply of electrical consumables items for rampurhat super speciality hospital building g plus 4, rampurhat, birbhum. 2nd call - supply & delivery 1-way 6a modular type switch make: anchor (model- penta) similer legrand/crabtree or as approved by eic., supply & delivery 6a modular type 5 pin plug socket make: anchor (model- penta) similer legrand/crabtree or as approved by eic., supply & delivery 16a modular type switch make: anchor (model- penta)similer legrand/crabtree or as approved by eic., supply & delivery 16a modular type 6 pin plug socket make: anchor(model- penta) similer legrand/crabtree or as approved by eic., supply delivery 3 module frame & cover plate make: anchor (model- penta) similer legrand/crabtree or as approved by eic., supply delivery 6 module frame & cover plate make: anchor (model- penta)similer legrand/crabtree or as approved by eic., supply delivery of 3 module gi box (brand: anchor/legrand/crabtree) equivalent as approved by eic., supply delivery 15a piano key type switch (brand: anchor/havells), supply and delivery 15a flushed type 3/6 pin plug socket (brand: anchor/havells), supply of t8 led tube range integrates led light source with frosted cover design delivering 50- 60% energy saving. make: philips model: mas ledtube 1200mm 18w 865 t8 i – 2100 lm/philips/wipro/orient or equivalent of as approved by eic., supply of mounting rail for single t8 led lamps functional and decorative general purpose basic battens for led tubes. for surface mounting on the wall or ceiling. the channel has a single piece construction made of powder coated white crca sheet steel, eliminating spot welds & hence rust free. the aesthetically designed lamp-holder brackets are side-in-type for ease of, installation/ maintenance. make: philips tmc 502 1xt-led 22w/ wipro/bajaj/orient or as equivalent of approved by eic., supply of mounting rail for double t8 led lamps functional and decorative general purpose basic battens for led tubes. for surface mounting on the wall or ceiling. the channel has a single piece construction made of powder coated white crca sheet steel, eliminating spot welds & hence rust free. the aesthetically designed lamp-holder brackets are side-in-type for ease of, installation/ maintenance. make: philips tmc 502 2xt-led 22w/wipro/bajaj/orient or as approved by eic., supply of 20w 4ft long surface mounting general purpose aluminium battens with best in class luminaire efficacy. these extruded aluminium housing battens are equipped with high specifications cispr 15 compliant electronics driver and milky white special polycarbonate diffuser, for glare free efficient light distribution thd<10% make: philips(model- bn170c led20s-6500 psu l120), similar wipro, bajaj/orient or as approved by eic., supply of recessed mounted round shape 18w downlight which uniquely designed deep recessed and offering visual comfort to users by reducing glare. the all aluminium costruction allowsbetter thermal performance ensuring long product life and better product aesthetics. make: philips(model- dn296b led20s-6500 psu wh ), similar wipro, bajaj/orient or as approved by eic., supply of slim, compact, auminum die cast edge commercial type 6w panel light (cct-6500k). recess mounted square fixture with opal diffuser and separate electronic driver (for lift, cut out- 75mmx75mm) make: havells, philips/wipro/ bajaj/orient or as approved b eic, supply of 23w led bulb cdl type with b22 base. make: philips, bajaj, crompton, havells,wipro as approved by eic., supply of universal type led panel indication lamp, dia 22.5mm red (20nos), yellow(10nos), green(20 nos.) model: operating voltage 24 to 240 vac/vdc make: l&t/siemens as approved by eic., supply of universal type led panel indication lamp, dia 22.5mm blue, white (each 10 nos.) model: operating voltage 24 to 240 vac/vdc make: l&t/siemens as approved by eic., supply of ring type, al lugs size: 16-10 (mm²-e) cat no: als-217 make: dowel, supply o

Central Government/Public Sector

CTN :45550931 Due date: 19 Jun, 202619 Jun, 2026 NA
Tender For supply of class b & c surge protection device (spd) -type i & ii with visual indication and potential free contact to remote monitoring as mentiontioned in specification no. rdso/spn/165/2023 dated 20.06.24 and as per rdso guidelines on earthing , bonding lightening and surge protection system for s&t installations issued vide lettter no.rdso-sig0spd(proj)/01/2020 dated 01.05.2025. [ warranty period: 12 monthsafter the date of delivery ] ]

Central Government/Public Sector

CTN :45546481 Due date: 22 Jun, 202622 Jun, 2026 NA
Tender For supply and installation of class b and c surge protection device [spd] - type i and ii with visual indication and potential free contact to remote monitoring as per specification no. rdso/spn/165/2012ver 3.0 or latest and iec standard 61643 for single line 230v ac application with handling lightning surgesof 10/350 microseconds and switching surges of 8/20 microseconds .one set consists of 3 nos. of spd [2 no. of b class [l-n, n-e] and one no. of c class [l-n] all enclosed in a box with kema or vde certified as per latest iec 61643-11-2011 standard. class b and c surge protection device required with three modules only.[ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45548920 Due date: 23 Jun, 202623 Jun, 2026 NA
Tender For supply of led based inspection minor lamp with portable battery charger, specification: 1) visual :- high bright head lamp with 07 nos. led%u2019s of size of 05 mm. 2) illumination:- 800 lux (minimum) at full charge & 400 lux (minimum) at low battery indication level at a distance of 01 meter lampunit shall have continuous burning life of more than 25 hrs. at full charge. as per drg.no. 3) battery: li-ion, 3.7 v, 4.5 ah (min.) rechargeable battery minimum 10hrs. working. 4) focus radius: 100-150 mm. 5) weight: 650gram maximum (complete with battery). 6) belt: elastic belt provision to wear on head & waist adjustable 150 degree up and down. as per specn. 7) battery charger : portable battery charger, 170v to 270v ac 50 hz. as per iec 60079/2011 standard. [ warranty period: 30 months afterthe date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45544345 Due date: 23 Jun, 202623 Jun, 2026 NA
Tender For humidity indicator for visual indication of rh inside a sealed missile container
 Loading, Please wait...

Connect us via What's Up