Latest electronic data management system Tenders | Government electronic data management system Tenders

corporations/Associations/Others

CTN :45276552

01 Jun, 2026 63.50 Lacs

Jaipur - Rajasthan

Tender For supply, installation, testing and commissioning of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure a attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., single aperture, providing & fixing of wiring accessories oem fabricated f

corporations/Associations/Others

CTN :45278994

01 Jun, 2026 63.50 Lacs

Jaipur - Rajasthan

Tender For sitc of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer -sitc of elv equipment - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , single aperture, providing & fixing of wiring accessories oem fabricated following size g

Central Government And Public Sector

CTN :45297070

27 May, 2026 NA

Bangalore - Karnataka

Tender For supply of the ac1200 wi-fi gigabit router or equivalent is designed to deliver reliable connectivity with comprehensive technical specifications across multiple categories. under general features, it supportsieee 802.11 ac/n/g/b/a wireless lan standards and includes one 10/100/1000 gigabit wan port alongside four 10/100/1000 gigabit lan ports, ensuring versatile wired and wireless connectivity. the device is equipped with led indicators for power, internet status, and both 2.4 ghz and 5 ghz wlan bands, while its four external 5 dbi antennas enhance signal strength and coverage. it complies with multiple ieee standards, including 802.11ac, 802.11n, 802.11g, 802.11b, 802.11a, and 802.3u, and requires a windows, macintosh, or linux-based operating system, a compatible web browser, an ethernet adapter, and an active isp subscription for operation. in terms of functionality, it offers robust encryption options such as wep, wpa/wpa2 (personal/enterprise), wpa3 (personal), and wps (pbc), along with advanced features like a web setup wizard, multiple operating modes (router, access point, repeater, and client), smart wi-fi adjustment, bandwidth management, automatic channel optimization, nat firewall, dmz, spi, guest wi-fi with mbssid support, qos (wmm), and vpn support including ipsec, pptp, and l2tp tunnels with pass-through capabilities. the router operates on a power input of 100 to 240 v ac (50/60 hz) with an output of 12 v dc at 1 a, and is built to function within temperatures of 0 to 40?c (storage: -20 to 65?c) and humidity levels of 10% to 90% non-condensing (storage: 5% to 95%). it is ce certified and categorized under order information as an ac1200 wi-fi gigabit router or equivalent, with a minimum warranty period of 3 (three) years. [ warranty period: 36 months after the date of delivery ] ]

CTN :45290287

15 Jun, 2026 70.00 Lacs

Jaipur - Rajasthan

Tender For to development university management information system

CTN :45164103

25 May, 2026 NA

Delhi - Delhi

Tender For corrigendum : pre-bid expression of interest for selection of consortium partner for design, build and operate of an university management information system (umis) for bihar based client

Central Government/Public Sector

CTN :45031786

23 May, 2026 NA

Raipur - Chhattisgarh

Tender For corrigendum : supply installation and implementation of project information management system pims at ntpc

Central Government/Public Sector

CTN :45069825

23 May, 2026 NA

Raipur - Chhattisgarh

Tender For corrigendum : supply installation and implementation of asset information management system aims at ntpc wrhq ii

CTN :44624114

29 May, 2026 7.95 Crore

Bangalore - Karnataka

Tender For corrigendum : design, supply and implementation of project management information system (pmis) for civil, electrical and system works of bengaluru suburban transport project (bstp)

Central Government/Public Sector

CTN :45240524

12 Jun, 2026 NA

Solapur - Maharashtra

Tender For provision of passenger information display boards with announcement system for crowd control management at various stations of solapur division on central railway.

State Government

CTN :44573237

09 Jun, 2026 NA

Gangtok - Sikkim

Tender For corrigendum : hiring of it service provider for setting up the integrated management information system under sikkim integrated service provision and innovation for reviving economies inspires program

Electronic Data Management System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government