Latest electronic display board Tenders | Government electronic display board Tenders

CTN :40903265

10 Jul, 2025 NA

Tawang - Arunachal Pradesh

Tender For supply of acp colour board 8 ft x 3 ft and board - ms iron frame of size 20 ft x 30 inch with 30 inch letter lighted with led alongwith driver. , hdpe barrel 200 ltr cap as per is 6312 , agronet cloth, green colour , hessian fabrics, containing 100 percent by weight of jute , hassion cloth, 3 ft width , tea kettle with tap, hot and cold pot 5 litter as per is 17526 , tea kettle with tap, hot and cold pot 15 litter as per is 17526 , vacuum insulated thermos flask 1 ltr as per is 7708 , round fry pan made of iron with handle, 300 mm dia , rectangular tawa iron size 3 ft x 3.5 ft, 6mm thick , karahi iron 24 inch , plastic crates for fruits and vegetable conforming to is 15532 , fan exhaust, 250mm sweep size, 345mm duct size exhaust fan , hdpe square plastic jerrycans 20 liter, conformity to performance requirements as per is 15749 , conical measuring cane cap 10 ltr , conical measuring cane cap 5 ltr , conical measuring cane cap 2 ltr , conical measuring cane cap 1 ltr , hand rotart barrel pumps, dual direction ) /bid number : gem/2025/b/6320281 * /dated: 30-06-2025 & & / bid document 1 / 22

CTN :40859261

02 Jul, 2025 25.00 Lacs

Kanpur - Uttar Pradesh

Tender For deposite work under edsd- rania - carriage of following material from store center or from any other place to the respective site of work distence up to 75 km through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., 8.5 mtr pcc pole, 11 mtr stp, different line material ( conductor, x-arm,channel, insulator , g.i. wire , stay wire & rod, earth rod , db box etc.), different capacity dt( 100/63/25/16/10 kva ), pilfer unit , ct/pt double metering unit ., erection of following material :, x-arm holding clamp / holding clamp with n&b, f- clamp with n&b, i/d & o/d type cable jointing kit suitable for 11 kv xlpe cable ( different size), stay insulator, g.i. pipe 6" dia, stone pad, anti climbing device as per respo norms ( with barbed wire ), danger board as per respo norms., erection of following material including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work. (with proper earthing.), single pole structure of 8.5 mtr pcc pole, single pole structure of 11 mtr stp pole, double pole structure of 8.5 mtr pcc pole, double pole structure of 11 mtr stp pole, stay set, laying of 11 kv xlpe cable (different size ) as per respo manual and as per direction of je inchrge., laying of 11 kv xlpe cable (different size ) inside g.i. pipe ., laying, sagging, stringing, binding and jumpering etc. of weasal/racoon /dog conductor on the newly erected pole/ old pole as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t & p, carries etc. required for proper completion of work., grouting of pole as per respo norms ( cement, sand , blast stone with the ration 1:4:8 will be provided by contractor ), grouting of stay set( cement, sand , blast stone with the ration 1:4:8 will be provided by contractor ), muffing of s.t.p. as per respo norms ( require material will be provided by contractor ), dismantling of existing 33kv/11 kv / l.t. line and removal of all accessories & fittings from poles, re-rolling of conductor and proper stacking and cartage of dismantled conductor & accessories from site of work to dvvnl, store., making joint with the help of cable jointing kiit (11 kv ), mounting of d.t. (100/63/25/16/10 kva ) upon double pole as per respo manual., installation of ct/pt unit as per respo manual., installation & grouting of pilfer unit as per respo manual., cutting of tree branches for clearness of line.

State Government

CTN :40865216

03 Jul, 2025 25.67 Lacs

Delhi - Delhi

Tender For annual repair and maintenance of to hospitals and dispensaries under health maintenance division (north) during 2025-26. (sh- providing and fixing informatory/ number plate/ name plate/ direction board).

State Government

CTN :40865504

05 Jul, 2025 NA

Mandi - Himachal Pradesh

Tender For co junior engineer office jal shakti sainthal in tehsil joginder nagar district mandi h.p sh installation sanitary item in je office cum residence - prov and fixing anodized aluminium tower bolt ( barrel type) anodized transparent or dyed to require shade and colour with screwa etc complete as per the direction of engineer in charge., 250x10 mm, prov and fixing anodized aluminium tower bolt ( barrel type) anodized transparent or dyed to require shade and colour with screwa etc complete as per the direction of engineer in charge., 200x10 mm, prov and fixing bright finished handles with screws etc complete as per the direction of engineer in charge. 75 mm, prov and fixng oxidized ms hooks and eyes complete as per the direction of engineer in charge 150 mm, prov and fixng 100 mm bright finished brass floor door stopper with rubber cushion screws etc to suit shutter thickness complete per the direction of engineer in charge, providing and fixing vitreous china wash down water closet ( european type w.c pan) with integral p or s trap including jointing the trap with soil pipe in cement mortar 1 : 1 ( 1 cement 1 sand) ( seat and cover to be measured and paid for separately)complete with in all lead & lifts and to the entire satisfaction of the engineer-in-charge., providing and fixing stainless steel kitchen sink of approved standard isi make with drain board and cp waste with ci or ms brackets painted white i/c cutting holes and making good the same but excluding fitting 610 x 510 mm with bowl depth 200 mm as per the direction of engineer in charge., prov and fixing brass bib tap with capson head ( superior quality heavy type) 15 mm dia, providing and fixing vitreous china wash basin with single hole for pillar tap with ci or ms brackets painted white including cutting holes and making good the same but excludinf fitting. 630x450mm, providing and fixing of pvc water storage tank sintex having capacity of 1000 ltr. with the necessary fittings including over flow pipes, scour pipes etc r inlet and outlet and inside painting with cover and locking arrangement of good quality complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 600 mm x 450 mm bevelled edge mirrior of superior glass mounted om 6 mm thick ac sheet or plywood sheet and fixed to wooden pluges with cp brass scerws and washers complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of cp brass towel rail complete with cp brass brackets foxed with wooden plugs with cp brass screws :- 750 x 20 mm. complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 600 mm x 120 mm glass shelf with cp braclet and guard rail complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 15 mm mixer for kitchen sink with top/bottom swinging spout complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 15 mm gi elbow complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 15 mm gi tee complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 15 mm gi socket complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 15 mm gi socket complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 32 mm dia, lead waste pipe for wash basin or sink i/c brass check nut complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of liquid soap container with cp brass lid and brackets fixed to wooden plugs with cp brass screws :- plastic container complete

State Government

CTN :40876119

04 Jul, 2025 2.85 Lacs

Nadia - West Bengal

Tender For construction of direction and place identification signs board from gayeshpur jublee park more to check post junction road and map more to yogajog club more at ward no-4, 5 within gayeshpur municipality

CTN :40850126

02 Jul, 2025 6.77 Lacs

Koyilandy - Kerala

Tender For koyilandy muncipality project no 780/24-25-direction board in town

State Government

CTN :40829339

08 Jul, 2025 19.90 Lacs

Noida - Uttar Pradesh

Tender For maintenance of road (p/f direction board and guide map in sector-63a), noida

corporations/Associations/Others

CTN :40780424

30 Jun, 2025 19.98 Lacs

Ahmedabad - Gujarat

Tender For providing & supplying fixing signage board and society direction boards in diffrent places under mp/mla/ muni. counsilor budget in vasna ward west zone. (arc)

Central Government And Public Sector

CTN :40796583

16 Jul, 2025 NA

Multi City - Multi State

Tender For supply of ceramic fibre blanket of is: 15402:2003 to the following specification:1) typ e of material: type-ii2) grade: 1203) bulk density: 128 kg/m. cub4) tensile strength(longit udinal direction): 40 kps5) linear shrinkage at 1400 deg cent: 4% max6) thermal conduct ivity at 500 deg cent: 0.15 w/mk max7) al2o3: 29-37%8) sio2: 42-57%9)zro2: 13-18%10)length of blanket: 7300 mm minimum11) width of blanket: 610 mm(with tolerance +10 & -2 percen tage)12) thickness of blanket: 12 mm(with tolerance +12 & -3 percentage)note:-a) materi al should be tested in nabl accredited lab and test certificate to be providedd uring s upply.b) the material shall be packed in waterproof polythene bags which shall be furt her encased in card board cartons ]

CTN :39262188

30 Jun, 2025 NA

Delhi - Delhi

Tender For corrigendum : procurement of spares for mirage aircraft - ubl (underwater locator beacon), mdr- awt, block, direction finding, er power supply module, control combined unit, ast board, equipped gyroscope structure, storage module, hbj- lsu wired structure, graphics and processing module (cpu ), multiplexer, clock module, mdr wired structure, video acquisition module (xtase ii), data loading unit, keyboard, low voltage power supply, back lighting module, crt assembly

Electronic Display Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

corporations/Associations/Others

Central Government And Public Sector