Tender For auction sale of iron scrap,iron scrap (tower & rail pole material),iron cable drum,ct off sizes,acsr conductor off sizes (uninsulated),joint box all size,pvc aluminium cable,choke all size,brass,aluminium,copper,ocb off sizes,scrap corrugated box,xlpe cable all sizes,vcb complete,acsr conductor off sizes (insulated),plastic meter box,pvc flexible wire all sizes,ct & pt combined unit,metering cubical,vcb incomplete,panel - incomplete offsize,copper cable scrap,shunt capacitor - off sizes,scrap lighting arrestor,scrap plastic meter seal,scrap plastic,scrap plastic(low grade),electric motor of all sizes,insulator,single phase meterelectronic (e-waste),single phase meterelectronic (e-waste) with meter box,poly phase meterelectronic (e-waste),hpsv fittings (e-waste),fluoroscent tubes (e-waste),water cooler(e waste),ceiling/wall fan,misc items punjabi bagh (refer annexure-1),iron - acb body ( refer annexure-2),iron (ring main unit) (refer annexure-3),transformer,11/0.433kv 100kva oil type as per annexure,transformer,11/0.433kv 100kva oil (tank only) as per annexure,transformer,11/0.433kv 400kva oil type(top core yoke and etc as per annexure,misc items budella 1 scrap store (refer annexure-5,misc items - e-waste budella 1 scrap store (refer annexure-6)
Tender For maintenance of pumps, motors, cubical metering unit and transformer substation of raw water pumping station at davorlim in salcete taluka.(2nd call)
Tender For maintenance of pumps, motors, cubical metering unit and transformer substation of raw water pumping station at verna in salcete taluka.(2nd call)
Tender For supply of electrical and electronics laboratory setup - rlc resonance trainer kit series and parallel resonance, kit consists of voltmeter and frequency counter, inbuilt signal generator, experiments can be performed with or without oscilloscope inbuilt power supply, maximum power transfer theorem trainer kit maximum power transferred from a source to a load when the load resistance is made equal to the internal resistance of a source. inbuilt fixed dc regulated power supplies : 12vdc, meters, ammeter & voltmeter, required components provided, circuit diagram printed on front panel & all important test points are brought out on front panel power requirement : 230 vac, clamp on meter suitable for min 300 a ac/dc current measurement range: 0.2 to 300 a, accuracy 1.5% ac voltage: mv to 1000 vac, accuracy: 0.75% dc voltage: 30mv to 1000 vdc, accuracy: 0.5% resistance: upto 30 mohm, accuracy: 0.5% capacitance 1 nf to 30 micro f, accuracy: 1% frequency upto 100 khz, accuracy: 0.5% auto hold, max/min, auto/manual, diode, ip20 protection., digital meter: portable table top type, with cabinet and stand, terminals brought out for connections, range: voltmeter:0-750v ac 0-500 vdc, ammeter:0-20a ac 0-20a dc 2 nos each range, electronicenergymeter( single phase) 240vac, 20aac, electronicenergymeter( three phase) 400 vac, 30 aac, digital multimeter ¾ digit , true rms ac voltage range : 1 mv to 1000v, accuracy < 1% dc voltage range : 10 mv - 1000 v, accuracy < 0.5% ac current range : 1 ma-10a, accuracy < 2%, dc current range 0.01 ma-10a, accuracy < 1.5%, resistance: 100 mohm-60 mohms, accuracy < 0.5% input impedance: 10mohm capacitance: 1 nf – 60 mf, accuracy: < 5%, frequency: 0.01 hz – 10 khz, accuracy < 0.1% duty cycle, temperature and diode test, lcd display with auto / manual range , included accessories: test leads, rubber holster, temperature probe, battery charger 12 / 24v dc, 15 a, digital power factor meter, portable bench top type, with cabinet and stand, terminals brought out for connections, range: single phase, 220v ac, 5a, digital frequency meter, portable bench top type, with cabinet and stand, terminals brought out for connections, range: 45-55 hz, digital wattmeter, portable bench top type, with cabinet and stand, terminals brought out for connections, range: 220v, 5a ac single phase (2 nos) 400 v, 5a ac, three phase (2 nos), single phase half wave, full wave , fully controlled bridge rectifier / converter design to study to controlled rectifier & observe wave form on cro. meters provided of suitable range, in built power supply. load resistance, controls for phase angle. circuit diagram printed, & test points brought out on front panel. power requirement: 230 vac +10%, 50hz. supplied with patch chords & instruction manual, ups trainer kit input range: 170 to 270 v, ac output (input present): 195 to 250 v capacity: 200 w battery: 12 v / 7 ah, maintenance free, test points for experimentation purpose. panels: input / output / battery / transformer / avr / charger /inverter study of charger study of changeover logic study and working of ups, smps trainer kit input : 110- 230v, output : 12v dc, switching transformer, scr commuation trainer kit two dc regulated power supplies 0-30vdc/150ma & 0-1 vdc/150ma, three meters for voltage & current measurement , scr 2p4m mounted behind the panel, connections of supplies, meters & scr brought out at 4mm sockets., characteristics trainer kit for scr,diac,triac, ujt,igbt instrument comprises of three dc regulated power supplies 0-15 vdc/150ma, 0-50 vdc/150ma & 0-2.5 vdc/150ma, four round dual range meters for voltage & current measurement,ujt, scr, diac, triac & their supportive components mounted behind the panel, connections of supplies, meters & components brought out at 4mm sockets., kit for speed control of dc motor using microcontroller eters (digital) :0-200v dc, 0-500ma dc instrument provided with 1/12 hp dc motor, on board phase a
Tender For corrigendum : for the work of fixing of 33 kv metering cubical and 33 kv ct/pt unit and laying of 33 kv cable for sanction of addition load 2400 and 5930 total 8330 kw of m/s land craft devolopers pvt ltd nh-24 mehrouli gzb under the jurisdection of eudd 9
Tender For providing, erecting, testing and commissioning of 11kv feeder bay, 11kvsingle circuit suspension type with 55 sq mm aaa cconductor, double pole structure, 11kvht metering cubical for 2nos at headwork karti and water treatment plant at shejgaon