Latest electronic equipments Tenders | Government electronic equipments Tenders

State Government

CTN :45051346

20 May, 2026 NA

Raipur - Chhattisgarh

Tender For estimate for maintenance of 11 kv line to be done through the contractor under sejbahar d/c & estimate for chemical earthing at mana d/c office to avoid any damage to electronic equipments at office under mana d/c & estimate for repl of deteriorated dt box at vill boriyakala under mana d/c under mana sub dn. of ee (o&m) dn. atal nagar nava raipur

Central Government/Public Sector

CTN :44467346

29 Apr, 2026 NA

Delhi - Delhi

Tender For bid to ras supply of audio visual items and stage lighting system for new academic block at nit delhi d d -video extender with av over ip controlling transmitter upto 30 meter range , full hd video extender with av over ip controlling receiver upto 30 meter range , full hd hdmi video capture card with hdmi loop out and usb output , room controlling device , 10 inch wall mount touch controller , 8 chanel power sequencer , 8 chanel light sequencer , 16 port poe ethernet network switch , 24 port gigabit ethernet network switch , 42u floor mount rack , cat 6 utp ethernet cable per meter , 2 sq mm two core speaker cable per meter , 1 sq mm three core control cable per meter , 2 point 5 sq mm three core power cable per meter , 4 sq mm three core power cable per meter , other required connecting cables and required accessories as per requirement for auditorium setup , other electrifications works required to install av equipment in classrooms , front curtain , back curtain , frill , 50mm dia b class gi pipe , wings , stage peritoneum work , m s pipe ladders to be provided on sides of the stage , 200 watt led profile spot , 200w full power light source , led par 54pcs high brightness , 200watt plano convex spot light , 200 watt led fresnel light , 400w led blinder , 300w beam moving head , lighting console with internal flash drive , electrical panel made out of ms sheet painted in gray colour , dmx splitter with one dmx input and 6 buffered outputs , light point wiring from patch panel , 3 core dmx cable with sheathed housing on the cable , lighting clamp , installation charges for stage furnishing and lighting , state of the art active indoor led display with glue on board with led wall controller , 86 inch ultra hd interactive flat panel display , digital podium , ai based auto tracking ptz hybrid video conferencing camera , ceiling mount kit for vc camera , visualizer with dtd cabinet , set of two wireless handheld microphone with dual channel receiver , all in one audio digital signal processor with 8 input and 8 output , 450 watt dual channel amplifier , 100 watt wall mount speakers , ultra hd hdmi matrix swicther with 4 hdmi input and 4 hdmi output , video mixing device with 4 hdmi input and 1 hdmi output , hdmi capture card with usb and hdmi loopout , ultra hd hdmi extender over cat 6 tx rx set upto 50 meter range , ultra hd hdmi cable 15 meter , usb 3 point 0 booster cable 10 meter , cat6 ethernet cable meter , 9u floor mount rack , other required cables and accessories , state of the art active indoor led display with glue on board technology with led wall controller , 65 inch ultra hd interactive flat panel display , 300 watt dual channel amplifier with combine bridge output of 600 watt , ultra hd hdmi matrix switcher with 4 hdmi input and 4 hdmi output , hdmi capture card with usb and hdmi loop out , cat6 ethernet cable per meter , floor mount stand for 86 inch interactive display , micro pc or ops pc i5 8gb ram 512 gb ssd with keyboard and mouse , usb video conferencing camera , wireless conference speakerphone , 100 inch ultra hd interactive flat panel display , dtd cabinet with visual presenter , camc charges for 2nd year , camc charges for 3rd year , camc charges for 4th year , camc charges for 5th year , camc charges for 6th year

CTN :43991047

22 Apr, 2026 19.61 Lacs

Port Blair - Andaman And Nicobar Islands

Tender For bid to ras supply of connecting screw driver , neon tester , screw driver set , insulated combionation plier , insulated side cutting plier , long nose plier , soldering iron , electrician knife , tweezers , digital multimeter , soldering iron changeable bits , crimping tool pliers , magneto spanner set , screw driver , steel rule , scriber straight , soldering iron , allen key set , tubular box spanner , magnifying lenses 75 mm , continuity tester , soldering iron 10w , cold chisel 20 mm , scissor 200 mm , handsaw , network printer , lan cards , wi fi lan cards , lcd or dlp projector , power meter , computer toolkit , motherboards intel , intel processors , hard disk drive ssd , external hard disk , smps , digital multimeter , digital camera , card reader , game video card , web cam , smps trainer kits , ups trainer kits , power electronics trainer kits , smps tester , post error debugging card , pci slot testing tool , scanner , modem , hardware and network trainer kit , wireless network adapter , wireless access point , router , managed layer 2 ethernet switch , managed layer 3 ethernet switch , network training system , network and internet security trainer , lan cable tester , power meter , media converetor , utp jack panel , sc couplers , sc pigtails simplex , sc pigtails duplex , fluke meter , switch with poe ports , poe adapters , network camera outdoor , network camera indoor , lc connector module , smd machine , sound card , graphgic card , lcr meter , function generator , digital storage oscilloscope , dc regulated power supply , ethernet media convertor ) /bid number: gem/2026/b/7231861 * /dated: 12-02-2026 & & / bid document1 / 58

Central Government/Public Sector

CTN :44912287

08 May, 2026 NA

Pune - Maharashtra

Tender For supply, installation & commissioning of internal solid state drive(ssd) crucial (micron),wd (western digital) or similar. 1)capacity minimum 128 gb 2) interface: sata iii (6 gb/s) or nvme pcie gen3-4 as per system compatibility 3) form factor: 2.5 (sata) or m.2 2280 (nvme) 4) performance: sata read 500 mb/s & write 400 mb/s, nvme read 1400 mb/s & write 600 mb/s 5) nand: 3d tlc or better with integrated controller, ecc and wear-levelling 6) reliability: smart & trim support with mtbf 1.5 million hours 7) environment: operating temperature 0c-70 c with low power consumption 8) compatibility: supports windows/linux and bios/uefi systems, with required mounting hardware 9) installation: physical fitment,cabling (for sata), bios/uefi configuration and system recognition 10) commissioning: drive initialization/formatting, os installation or cloning (if required), performance verification and minimum 5-year oem warranty included. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :44807756

22 Apr, 2026 NA

Lumding - Assam

Tender For at hji-design, supply, installation, testing and commissioning of a passenger lift of 14 passengers (952 kg) capacity for g+1 floors (approx. 10 m travel), machine : gearless with permanent magnet motor located in the shaft at the top as per rdso specification no:rdso/2013/em/spec/0016 (rev '2'')-2025, complete with all associated electrical, mechanical and civil interface works and accessories, including 1.0 m/s vvvf drive, automatic centre-opening doors (minimum clear opening 700 - 2000 mm), car height 2400mm, finished floor height 2600 mm, pit depth 1600 mm and headroom 5000 mm; equipped with traction machine suitable for 952 kg load with 8-19s fibre-core self-lubricating ropes, guide rails, buffers and complete hoisting/suspension system; microprocessor-based monoblock control panel with closed-loop control, safety torque-off, automatic rescue device (ard), fireman operation, overload protection, emergency alarm/light and all mandatory safety features as per rdso spec; stainless-steel car with led lighting, ventilation fan, handrail, voice announcement system, vandal-resistant cop & lop with digital indicators; including all cabling, earthing, testing, commissioning, statutory clearances and handing over, along with 2 years comprehensive warranty covering all parts, labour and service. cost includes free maintenance of two years during warranty of lift as per rdso spec no.rdso/2013/em/spec/0016 (rev'2') - 2025 make-johnson/otis/schindler/omega elevators /techno industries or equivalent. [ warranty period: 24 months after the date of delivery ]

Central Government/Public Sector

CTN :44817234

22 Apr, 2026 15.84 Lacs

Raichur - Karnataka

Tender For electronic equipments to chc matmari

Central Government/Public Sector

CTN :44792862

21 Apr, 2026 NA

Erode - Tamil Nadu

Tender For supply of hard disk drive (hdd) 2 tb for crew voice and video recording system( cvvrs) for electric locomotive to rdso spec.no. rdso/2015/el/spec/0118 (rev. 1). the item is equivalent to the product photo enclosed and the technical specification is enclosed. the size of the item is 100mmx7mmx70mm. note: firm must comply with rdso specification no. rdso/2015/el/spec/0118 (rev. 1) at the time of tender submission. otherwise, offers not complying with this specification will be summarily rejected." make: seagate (or) western digital (or) barracuda (or) toshiba (or) similar. [ warranty period: 30 months after the date of delivery ]

CTN :44452223

04 Apr, 2026 14.15 Lacs

Navsari - Gujarat

Tender For bid to ras corrigendum : supply of bi facial solar panel 550 watt , topcon solar panel 610 watt , cut section of gate valve,globe valve,ball valve,diapharm valve,needle valve,check valve,safety valve,butterfly valve,pnematic control valve 4 inch diameter , cut section of centrifugal pump,gear pump,multistage c f pump,reciprocating pump,screw pump , cut section of shell and tube heat exchanger acrylic material , cut section of reactor with accessories motor,agitatot,support leg,nozzle,manhole,baffels,thermo well,bottom valve , vrf or vrv unit with two indoor unit 2 point 5 tr each and 5 tr capacity out door unit complete with air cooled condenser,accessories and controls,harmetic shield type compresor,r410 a single phase , evacuating and charging station as above but fitted with weighing scale 0 point 25 hp,230v,50 hz with gauge manifold , gauge manifold with gauges different size of hoses for r134a,r22,r32 and r 410 , wash bag cover jacket for ac service indore 1 point 5 ton,2 point 5 ton capacity , safety belt, industrial type full body protection double rope double hook,100 kg human weight , embroidery machine , brake test arrangement with two spring balance 0 to 25 kg rating , automatic motor coil winding machine with step arbor , three phase variable auto transformer ac varic 3 phase , 0 to 440v, 25a, 50 hz , synchronous motor, with accessories , vfd ac drive ac motor drive with vvvf control 3 phase , single phase transformer, core type, air cooled,1 kva,240 or 415 v,50hz , stepper motor with digital controller , bipolar , 12v dc , input pulse 5v, step angle 1 point 8 , power supply 230 v ac , oprating condition 0 to 40 deg c , bldc motor fan with controller 40 watt , servo motor with contoller 300rpm,12v dc,6mm dia and 15mm legth shaft ,holding torque 30kg cm,no load current 0 point 8 amp,full load current 7 point 5 amp , electrical test bench integrated with 0 to270v ac variac 25a , synchronization trainer for laboratory , solid flow measurement set up bi facial solar panel 550 watt,efficiency 21.3 percentage,dimension 2285mm x 1134mm x 35 mm,anodized aluminumsilver frame,connector mc4 ev02,maximum system voltage 1500v dc, topcon solar panel 610 watt,efficiency 22 point 6 percent to 22 point 9 percent,n type topcon,dimension 2382x1134x30 mm,2 mm dual glass,maximum system voltage 1500v dc, cut section of gate valve,globe valve,ball valve,diapharm valve,needle valve,check valve,safety valve,butterfly valve,pnematic control valve 4 inch diameter, cut section of centrifugal pump,gear pump,multistage c f pump,reciprocating pump,screw pump, cut section of shell and tube heat exchanger acrylic material, cut section of reactor with accessories motor,agitatot,support leg,nozzle,manhole,baffels,thermo well,bottom valve, vrf or vrv unit with two indoor unit 2 point 5 tr each and 5 tr capacity out door unit complete with air cooled condenser,accessories and controls,harmetic shield type compresor,r410 a //bid details 2 / 25

CTN :44720836

17 Apr, 2026 NA

Multi City - Chandigarh

Tender For auction sale of others, ewaste, e-waste, e-waste (v2) - e-tender cum forward auction for electronic equipments (as is where is basis)

corporations/Associations/Others

CTN :44640430

30 Mar, 2026 NA

Bhusawal - Maharashtra

Tender For corrigendum : auction sale of empty plastic jerican 20 to 30 ltr,mild steel turning & boring,battery of verious sizes (unserviceable battery),used toner cartridge 12a,used toner cartridge 88a,used toner cartridge (miscellaneous),unserviceble desktop cpu,unserviceble desktop monitor,unserviceble dump terminal,e-scrap (electronic scrap, condemned electronic equipments

Electronic Equipments Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others