Latest electronic hour meter Tenders | Government electronic hour meter Tenders

Central Government/Public Sector

CTN :45520040

09 Jul, 2026 85.87 Lacs

Visakhapatnam - Andhra Pradesh

Tender For day to day maintenance and call on repairs for attending breakdowns at south drydock pump house including replacement of unsv items for dol starters star delta starters metering equipment switch gears digital water sensors fpt systems at drydocks nav

Central Government/Public Sector

CTN :45520060

09 Jul, 2026 1.02 Crore

Visakhapatnam - Andhra Pradesh

Tender For day to day maintenance and call on repairs for attending breakdowns at north drydock pump house including replacement of unsv items for dol starters, star delta starters, metering equipment, switch gears, digital water sensors, fpt systems at drydock, naval dockyard visakhapatnam under ge (i) (dm) visakhapatnam

CTN :45478137

27 Jun, 2026 NA

Vidisha - Madhya Pradesh

Tender For items - computer and servises and otheres, mcb (miniature circuit breaker), acb (3200a/4000a ), acb (air circuit breaker), allen key set, amf relay, ammeter, annunciation system, anti-corrosion spray, arc flash suit, arc flash suit (ht/lt panel ), auxiliary contacts, avr (automatic voltage regulator), battery charger, blower/air blower, breather assembly, bus coupler acb, busbar insulators, busbar supports, cable glands, cable glands, cable lugs, cable ties, cable ties, changeover switch, clamp meter, clamp meter, combination pliers, consumables, contact cleaner spray, contactor, continuity tester, control cable, control fuses, control relay, control wires, cooling fan, copper busbar, crimping tool, ct (current transformer), current transformer (ct), dg set synchronization panel (3 750 kva), digital multimeter, digital multimeter, discharge rod, earth fault relay, earth switch, earth tester, earthing rod, electrical contact cleaner, electrical gloves (11 kv rating), electrical safety gloves, emergency stop switch, energy meter, engine control module, face shield, ferrules, ferrules, flexible wire, frequency meter, fuse fuse base, heat shrink sleeves, heat shrink tubes, hrc fuse, hrc fuses, ht protection relay, indicator lamps (r/y/b), infrared thermometer / thermal camera, insulated screwdriver, insulation tape, isolator switch, lightning arrester, load sharing module, lockout-tagout (loto) kit, loto kit, lt pcc/mdb panel, lubricant spray ( ), lugs, maintenance tools, mccb, mccb (molded case circuit breaker), megger (insulation tester), megger 5 kv, microfiber cloth, motorized mechanism, multifunction meter, multifunction meter, nose pliers, numerical protection relay, oti (oil temperature indicator), over current relay, overload relay (olr), phase sequence meter, phase sequence tester, plc module, power analyzer, power cable, power factor meter, protection & metering, pt/vt (potential transformer), push buttons (start/stop), pvc insulation tape, reverse power relay, rust remover, safety equipment, safety goggles, safety helmet, safety helmet, safety shoes, safety shoes, screwdriver set, secondary injection test kit, selector switch, shunt trip coil, side cutter, silica gel, smps (power supply), soft brush, spanner set, speed governor module, spiral wrapping, spring charging motor, starting relay, synchronizing relay, terminal blocks, thermal camera, thermostat, timer relay, torque wrench, transformer buchholz relay, transformer oil, under/over frequency relay, under/over voltage relay, uv coil, vacuum cleaner, vcb (vacuum circuit breaker), voltage tester, voltmeter, wire markers, wire stripper, wti (winding temperature indicator), , , , comprehensive maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor & majour spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete., annual maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete.

CTN :45261219

16 Jun, 2026 NA

Cuddapah - Andhra Pradesh

Tender For corrigendum : supply of tas revamp at kadapa terminal c c - supply of 3inch mfm with 4inch flange , erection, tandc of 3inch mfm , supply of 2inch mfm inc 2inch nrv , erection, tandc of 2inch mfm , camc of supplied mass flow meters , supply - 4inch sae with dpg , erect and comm of 4inch sae , sup-rtd cm temp transmitter , testing and commng of rtd , sply 4inch dcv , erect and comm of 4inch dcv , sply 2inch piston type dcv , erect and comm of 2inch dcv , sup - 2inch sae with dpg , erectand comm - 2inch sae , sup dual arm bcu , erect and comm of bcu , sup of rit , erect and comm of rit , sup-additive block-powrandtrbo , erect and comm of additive block , sup of proximity card reader , supply of proximity cards , supply and inst of face readers for biometric , barrier gate , erection and commissioning of barrier gate , terminal server - 16 port , erect and comm - terminal server , cabling works for shifting of metering assembly , mandatory spares-gantry equipm , armoured cat6a cables with shielded rj45 connectors , sup - 24cx1.5 sq. mm - frls , sup - 8 cx1.5 sq. mm - frls , sup - 4 cx1.5 sq. mm - frls , sup - 3cx2.5 sq. mm - frls , sup- 1px1.5 sq. mm - frls , sup- 2px1.5 sq. mm - frls , sup- 12 px1.5 sq. mm - frls , lay -all type of cables , load rack server , client pcs , terminal automation software , manday assistance , resident engineer during stabilisation , camc of supplied tas equipment , camc of free issue items , camc period load rack server , camc period client pcs , 24 port ethernet switch , process plc

State Government

CTN :45459204

15 Jun, 2026 29.04 Lacs

Bilaspur (Hp) - Himachal Pradesh

Tender For tender for the work prov. sop to newly construction 50 beds govt. hospital at sh. naina devi ji by erection of 11-0.4 kv 630kva s-stn and11 kv metering equipment 11kv ct-pt combined unit outdoor type a-w new 11kv ht line under esd hpsebl kot nit-02-2026-27

State Government

CTN :45455751

15 Jun, 2026 7.69 Lacs

Mandi - Himachal Pradesh

Tender For estimate for prov. sop to wss (water supply scheme ) for newly added area of nagar nigam mandi distt. mandi (h.p) by providing 100 kva , 11/0.4 kv transformer alongwith ct/pt metering equipment ht for conected load 75 kw in (e) section bagl

State Government

CTN :45368749

16 Jun, 2026 10.42 Lacs

Bacheli - Chhattisgarh

Tender For tender for shifting of substation to near bacheli railway station and metering equipment bacheli applied by chief electrical engineer east cost railway kirandul under kirandul d/c of (o&m) dn., dantewada.

CTN :45322644

01 Jun, 2026 8.70 Lacs

Sawai Madhopur - Rajasthan

Tender For supply, installation, testing and commissioning of phase wire and street light and vairious electrical equipment needed for implementation of budget announcement 2025-26 - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in, led street light fixture with minimum lumen output 5600 lm, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar bus bar is insulated by heat shrinkable sleeves . earth and neutral bus bar shall be half of the size of phase bus bar. ( cost of bus bar / flexible wire for interconnection between main busbar and switchgear is to be paid extra )(d)wiring between components within switchgear and incoming / outgoing cable shall be done through the terminal block only. direct connection shall not be permitted. each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. for tap-offs, adjacent terminals with shorting strips shall be used. 10% spare terminal blocks shall be provided. wire identification on marking strip shall correspond to the designation of the wiring diagrams. all wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram.(e)all wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, wiring between terminals of various devices shall be point to point (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.(f)floor mounted panel sh

State Government

CTN :45075439

29 May, 2026 3.98 Crore

Sagar - Madhya Pradesh

Tender For corrigendum : providing and erection of new ht line including installation of metering equipment (from banda s/s to pump house kandhari) for pump house no. 02 of banda irrigation project.

CTN :44950718

26 May, 2026 9.82 Crore

Jaipur - Rajasthan

Tender For corrigendum : execution of deposit works, including the supply, erection, installation, testing, and commissioning of materials/equipment for the construction of 33/11 kv sub-stations, 33 kv & 11 kv overhead line, laying of 33 kv and 11 kv underground xlpe cable, construction of 33 kv bay, 11 kv bay and shifting of 33 kv & 11 kv line, metering under baran & jhalawar circle on turnkey basis against tw/tn-623.

Electronic Hour Meter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government

State Government