Latest electronic igniter Tenders | Government electronic igniter Tenders

Trust

CTN :45679919

29 Jun, 2026 NA

Katra - Jammu And Kashmir

Tender For supply of miscellaneous electric items - steel tubular 9 mtr. long pole (st-410 sp33) , acsr weasel conductor 6/1/2.59 mm , 11 kv go, ab switch 3-phase, 3-pole, 200 amp vertical type with rod heavy duty , back clamp for 9 mtr. pole with fitting , 11 kv horn gap fuse set (hg set) 3-phase 400 amp polymer type heavy duty , la set station type (gapless surge arrestor, 9kv, 10 ka, la with polymer housing station type heavy duty) , xlpe pvc cable single core 300 mm sqr. (300 sq mm cable 1.1 kv grade, pvc insulated standard conductor frls type) , 11 kv polymeric pin insulator 12 kv, 5 kn, lighting impulse 75 kv positive and 80 kv negative, creepage distance 320 mm , insulator disk 11 kv (11kv polymeric composite discs insulator with pin and gl fittings, 12 kv, mainfalling load 45 kn, lighting impulse 75 kv positive and 80 kv negative, creepage distance 320 mm) , channel 100.00 mm x 50.00 mm x 5.00 mm (10 feet long) , nut bolt full thread with washer 4"/6" heavy duty , wedge connection / pg clamps , danger plate and clamps , g.i. bracket wire for anti climbing , 3 phase 4 wire trivector meter with ct/pt unit , aluminium thimble 185 mm , lv distribution box for 400 kva dtr with mccb for incomer & sfu's for outgoing circuits , stay set (gi rod with clamp) - galvanised stay set with 50x8mm stay clamp, gav. insulator (02 nos.) anchor plate (200x200x6mm) nut-bolt 2 nos. turn-buckles, 1.8 m long 16 mm diameter solid g5 stay rod & 7/3. 15 mm dia gi standard wire complete , g.i. guy rod complete with clamp and insulator , anti climbing device with clamp , guy / stay wire 7/14, galvanized steel, typically hot-dip zinc-coated for corrosion resistance , giv cross-arm with top bracket and gi channel-arm including clamp (gi v cross arm with top bracket including clamp and gl channel x-arm including clamps and braces) , channel 75 x 75 x 6mm (10 feet long) , g.i. earthing wire 8/10 mm

CTN :45662043

07 Jul, 2026 44.41 Lacs

Sultanpur - Uttar Pradesh

Tender For running contract for deposit works under edd-jaisinghpur, sultanpur. - part-a (material), following materials supplied by the contractor :-, stone pad., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., pg clamp, guarding angle clamp., barbed wire g.i., stay loop insulator/guy insulator., bolts, nuts & washers all sizes., l.t. connector (pearcing)., gi pipe 6" dia, hdpe pipe 120mm., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 09 mtr. long., safe carriage of stp 11 mtr. long., safe carriage of pcc pole 8.5 mtr. long., safe carriage of pcc pole 09 mtr. long., safe carriage of pcc pole 11 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of acsr rabbit conductor., safe carriage of 11 kv xlpe cable al. 3x70/3x120/3x185/3x240 sq.mm., safe carriage of lt abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 10/16/25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp 09 mtr. long from site to pit point., dragging of stp 11 mtr. from site to pit point., dragging of pcc pole 8.5 mtr. from site to pit point., dragging of pcc pole 09 mtr. from site to pit point., dragging of pcc pole 11 mtr. from site to pit point., fabrication & erection of single pole support on st pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on st pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 8.5 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 8.5 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., stay complete with concreating as per respo norms., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc as per respo norms., laying stringing & sagging of new acsr rabbit conductor including binding jumpering etc as per respo norms., digging of trench & laying of cable 11 kv xlpe cable 3x70/3x120/3x185/3x240 sq.mm including sands & brick as per respo norms., laying of cable with hdd method using with hdpe pipe (120mm od pn-4 pe 80 grade uv stabilized hdpe pipe as per is: 4984 of 6 metre) 11 kv xlpe cable 3x70/3x120/3x185/3x240 sq.mm as per respo norms., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x70/3x120/3x185/3x240 sq.mm xlpe 11 kv cable (cost

CTN :45662051

07 Jul, 2026 28.30 Lacs

Sultanpur - Uttar Pradesh

Tender For running contract for deposit works under edd-baldirai, sultanpur. - part-a (material), following materials supplied by the contractor :-, stone pad., lt clamp with nut & bolts., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., pg clamp, guarding angle clamp., barbed wire g.i., stay loop insulator/guy insulator., bolts, nuts & washers all sizes., l.t. connector (pearcing)., gi pipe 6" dia, hdpe pipe 120mm., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 09 mtr. long., safe carriage of stp 11 mtr. long., safe carriage of pcc pole 8.5 mtr. long., safe carriage of pcc pole 09 mtr. long., safe carriage of pcc pole 11 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of acsr rabbit conductor., safe carriage of 11 kv xlpe cable al. 3x70/3x120/3x185/3x240 sq.mm., safe carriage of lt abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 10/16/25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp 09 mtr. long from site to pit point., dragging of stp 11 mtr. from site to pit point., dragging of pcc pole 8.5 mtr. from site to pit point., dragging of pcc pole 09 mtr. from site to pit point., dragging of pcc pole 11 mtr. from site to pit point., fabrication & erection of single pole support on st pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on st pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 8.5 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 8.5 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., stay complete with concreating as per respo norms., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc as per respo norms., laying stringing & sagging of new acsr rabbit conductor including binding jumpering etc as per respo norms., digging of trench & laying of cable 11 kv xlpe cable 3x70/3x120/3x185/3x240 sq.mm including sands & brick as per respo norms., laying of cable with hdd method using with hdpe pipe (120mm od pn-4 pe 80 grade uv stabilized hdpe pipe as per is: 4984 of 6 metre) 11 kv xlpe cable 3x70/3x120/3x185/3x240 sq.mm as per respo norms., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x70/3x120/3x185/3x240

Trust

CTN :45645403

26 Jun, 2026 NA

Katra - Jammu And Kashmir

Tender For quotation for supply of miscellaneous electric items - 11 kv polymeric composite pin insulator , kv, 5kn, lighting impulse 75 kv positive and 80 kv negative creepage distance 320 mm ,11 kv polymeric composite disc insulator with gi fittings, 12 kv, main falling load 45 kn, lighting impulse 75 kv positive and 80 kv negative creepage distance 320 mm , gi guy rod complete with clamp and insulator 01 no , iron channel 75 x 75 x 6 mm (5 ft long) 80 kgs , nut bolt full thread with washer 4 /6 heavy duty , motor 7.5 hp 3 phase (inlet 65mm & outlet , motor 1 hp 01 no. , mccb 100 amp 25 ka 4 pole, rated voltage: 415v ac, 50 hz 08 nos l&t / schneider / abb , tpn 100amp (c-curve) 05 nos , digital clamp meter 02 nos isi 11 standing (pedestal) fans, higher airflow, powerful motor, energy-efficient, oscillation feature for wide coverage 02 nos crompton / bajaj /usha / orient ,air cooler plastic body, capacity 60 ltrs or above

corporations/Associations/Others

CTN :45263412

04 Jul, 2026 NA

Pudukkottai - Tamil Nadu

Tender For corrigendum : supply of 4500 sets of stay set complete - supply of silicagel blue, 0.6kva ups, stay set complete( quote price for single unit only), silicagel blue 10 to 12mm, pole pit for 9.0m and 9.14 m psc/rcc / all metal poles (each pit) 1.25 x 0.6 x 1.83 mtr, ordinary soil, semi rocky soil, heavy rocky soil where blasting/ cheseling required [specific approval should be obtained from concerned ee], stay pit, in ordinary soil [0.95 x 0.6 x 1.2m], semi rocky soil, stay pit in heavy rocky soil where blasting/ cheseling reqiured [specific approval should be obtained from concerned ee], erection of poles & stays (including refilling of excavated earth), erection of 7.5m / 8.0m poles [rcc / psc], erection of 9.00m / 9.14m rcc / psc/rail pole, tubular pole and all metal poles, stay set, erection stay set complete, stay erection without rod and pit, replacement of stay rod only. (including stay pit excavation & refilling & erection), replacement of guy shackle only in existing stay, erection of line materials, fixing of lt 1 ph "x" arm, fixing of lt/ht ti fitting, fixing of lt 3 ph "x" arm, fixing of 3[1/2] v ` x arm, fixing of 4[1/2] v ` x arm, fixing of 5 v x arm, fixing of tapping channel / guarding "x" arm, providing of line spacers in lt lines 1 phase, providing of line spacers in lt lines 3 phase, erection of ab switch with pt insulator & jumpering complete, erection of centre rotating switch ab switch complete, fixing of ht pin insulator / strain disc, 11 kv pin insulator with pin, 11 kv strain disc / polymer disc with hardware, 22 kv pin insulator with pin, 22 kv strain disc / polymer disc with hardware, 33 kv pin insulator with pin, 33 kv pin strain disc/polymer disc with hardware, fixing of lt pin insulator with pin, lt shakle with hardware, fixing of aluminium knob, paving stringing and sagging of conductor including binding of pin and proper tight [including transport of condutor from road side to work spot] per run, upto 7/2.59 mm acsr, 7/2.50 aaac including pvc cable upto 25 sqmm, acsr 7/3.35mm & 7/ 3.15 aaac including pvc cable above 25 sqmm, acsr 7/4.09 mm, above 7/4.09 mm acsr & dog conductor, earthing wiring and connection including transporting of earth pipe and excavation of pit], transformer structure earthing 10ft depth - 3 nos of pipe through tubes, dp earthing including all works [double side earthing], erection of 4th earth pipe including earthing, earthing of poles, earth pit masonary work 3 nos earth pits or using 3 nos concrete tub., replacement of detoriated earth pipe per location, concreting with mixture 1:3:6 [including all materials]., mass concreting for centre support for 2 feet including all materials, mass concreting for pole0.6x0.6x1.25m.with coping, sleeve concreting for pole 0.6 m x 0.6m x 0.3 m with coping, sleeve concreting for stay set 0.3 m & 0.75 long, erection of distribution transformer structure complete, excavation of structure pole pits 0.9 x 0.9 x 1.83 mtr, transporting of pole to pit location 2 nos., erection of poles 2 nos, excavation of stay pit 4 nos, erection of stay set (4 sets), mass concreting (cement:sand:jelly supplied by the contractor) 2 nos., erection of 22 kv ab switch, ttransformer structure earthing 10ft depth - 3 nos of pipe through earth tubes, erection of top channel, bed channel [2 nos channel] erection, cross with stud for bed channel erection, erection of belting angle / hg fuse angle, erection of hg fuse set, erection of ht las with jumpering and earthing, erection of lt las with jumbering and earthing, erection of jumpering [ht side], transformer wiring in lt side including jumpering bus bar etc., erection lt open type fuse unit arrangement single, erection lt open type fuse unit arrangement double, painting of stru. complete excluding dt [two coat of red oxide] all metal parts(excluding cost of paint)., painting of stru. complete excluding dt [one coat alu paint, excluding cost of paint), colour washing of 2 numbers structure p

CTN :45447086

20 Jun, 2026 NA

Bhaderwah - Jammu And Kashmir

Tender For corrigendum : fixing of rates for supply of minor spares minor stores key material equipment hardware items required from time to time for operation maintenance of distribution network during the fy 2026 27 - fixing of rate contract for supply of minor spares/minor stores/key material/equipment/hardware items required from time to time for operation/maintenance of distribution network during the fy 2026-27. - al. thimble 95 mm heavy duty (conforming isi standards), al. thimble 120 mm heavy duty (conforming isi standards), al. thimble 185 mm heavy duty (conforming isi standards), al. thimble 300 mm heavy duty (conforming isi standards), al. thimble 400 mm heavy duty (conforming isi standards), al. thimble 630 mm heavy duty (conforming isi standards), al. bus bar of sizes, bus bar insulator (conforming isi standards), 11 kv disc insulator porcelain b&s 45 kn (conforming isi standards), 11 kv disc insulator porcelain b&s 70 kn (conforming isi standards), 11 kv disc insulator porcelain t&c 45 kn (conforming isi standards), 11 kv disc insulator porcelain t&c 70 kn (conforming isi standards), 11kv disc insulator (polymeric) 45kn, t&c/b&s (conforming isi standards), 11 kv disc fittings g.i heavy duty b&s, 11 kv disc fittings g.i heavy duty t&c, 11 kv hg set (heavy duty), 11 kv la set porcelain (station type) (heavy duty) 5 ka (conforming isi standards), 11 kv la set porcelain (station type) (heavy duty) 10 ka (conforming isi standards), 11 kv la set porcelain (line type) (heavy duty) (conforming isi standards), go set with pipes complete/ galvanized (heavy duty) 9 nos.post insulator, guy insulator lt/ht (conforming isi standards), 11 kv pin insulator porcelain 10 kn (conforming isi standards), 11 kv pin insulator porcelain 5 kn (conforming isi standards), 11kv pin insulator with pin (polymeric) (conforming isi standards), gi pins 700 gms, shackle insulator 6 (conforming isi standards), 11 kv link set 16 size 50x6mmx420mm, 11 kv drop out set heavy duty, 11kv la set line type polymeric (conforming isi standards), 11kv la set station type polymeric (conforming isi standards), mccb 3 pole 63 amp (25 ka) (conforming isi standards), mccb 3 pole 100 amp (25 ka) (conforming isi standards), mccb 4 pole 100 amp (25 ka) ( conforming isi standards), mccb 3 pole 200 amp (25 ka) ( conforming isi standards), mccb 4 pole 200 amp (25 ka) ( conforming isi standards), mccb 3 pole 250 amp (25 ka) ( conforming isi standards), mccb 4 pole 250 amp (25 ka) ( conforming isi standards), mccb 3 pole 250 amp (35 ka) ( conforming isi standards), mccb 4 pole 250 amp (35 ka) ( conforming isi standards), mccb 3 pole 400 amp (36 ka) ( conforming isi standards), mccb 4 pole 400 amp (36 ka) ( conforming isi standards), mccb 4 pole 630 amp. (36ka) ( conforming isi stadards), single phase energy meter 60amp, single phase energy meter 30amp, prodigy meter (secure make), 11 kv ct/pt units of various ratios including 3-phase, 4 wire trivector meter with compatible meter box and pvc copper control cable 10 core having 10 mtr. length., 3-phase, 4 wire trivector meter (secure make), ct/pt combine unit of various ratios, meter box compatible for housing trivector meter, 3-phase, 3 wire trivector meter (secure make), 140 w led high mast light (make : syska/bajaj/havells/crompton/any other reputed company make), 120 w led high mast light (make : syska/bajaj/havells/crompton/any other reputed company make), 100 w led high mast light (make : syska/bajaj/havells/crompton/any other reputed company make), 50 w led street light (make : syska/bajaj/havells/crompton/any other reputed company make), 70 w led street light (make : syska/bajaj/havells/crompton/any other reputed company make), 90 w led street light (make : syska/bajaj/havells/crompton/any other reputed company make), 100 w led street light (make : syska/bajaj/havells/crompton/any other reputed company make), pvc multistrand wire copper 1.0 mm2, pvc multistrand wire copper 1.5 mm2, pvc multistr

corporations/Associations/Others

CTN :45508661

15 Jun, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of scrap from works / products pvc scrap,scrap insulator from enabling works medium in size guy insulators for 11 kv,scrap small tools hdpe,scrap 11 kv disc fitting for disc insulators,scrap miscellaneous gi from enabling works old scrap junction box,scrap electrical item lightning arrester,scrap structural steel gi,scrap miscellaneous gi from works / products gi wire,scrap small tools gi from demolitions / dismantling / testing dead end clamp,scrap electrical cable moc aluminium from works / products,scrap small tools gi from demolitions / dismantling / testing suspension clamp,scrap electrical fitting from works / products medium in size,scrap from works / products 3c x 120 sq mm ug cable jointing kit,scrap from works / products cable end cap(3000sqm),scrap structural steel ms from works / products used bolts & nuts,scrap electrical cable aluminium from enabling works,scrap electrical cable aluminium from works / products aluminium armoured cable,scrap lt abc cable3cx701cx70 16sqmm,scrap pipe gi from demolitions / dismantling / testing medium in size,scrap insulator insulator broken

CTN :45475408

22 Jun, 2026 NA

Udhampur - Jammu And Kashmir

Tender For rate contract for supply of electric material(ht/lt) t&p/equipments/hardware items etc.for std udhampur -balance items. note :the bidders are advised to quote the reasonable rates for supply of all the items mentioned in boq. any rate quoted as zero shall be assumed that the firm is unwilling to supply the particular item and next lowest rate shall be considered as l1 for that particular item. - xlpe power cable (make havells or any other reputed make conforming to relevant is specifications) :, 11 kv single-core xlpe armoured cable 630 mm2, 11 kv 3-core xlpe armoured cable 185 mm2, twin core al lt cable 16 mm2 pvc cable (al), lt xlpe al cable 3.5 core armoured x95 sqmm (3 x 95 + 1 x 70 + 1 x 16), 33 kv cable termination kits outdoor (make havells or any other reputed make conforming to relevant is specifications) :, cable termination kits 33 kv heat shrinkable outdoor type 300 mm2 (single core), 33 kv cable termination kits heat shrinkable 300 sqmm -3 core, 33 kv cable termination kits heat shrinkable 240 sqmm -3 core, 33 kv cable termination kits heat shrinkable 185 sqmm -3 core, 11 kv cable termination kits outdoor/indoor (make havells or any other reputed make conforming to relevant is specifications), a)cable kits 11 kv heat shrinkable indoor 630 mm2 (single core), b) cable kits 11 kv heat shrinkable indoor 400 mm2- 3 core, c) cable kits 11 kv heat shrinkable indoor 300 mm2 - 3 core, d) cable kits 11 kv heat shrinkable indoor 240 mm- 3 core, e) cable kits 11 kv heat shrinkable indoor 185mm2 - 3 core, f) cable kits 11 kv heat shrinkable indoor 120 mm2 - 3 core, g) cable kits 11 kv heat shrinkable outdoor 630 mm2 - 1 core, i)cable kits 11 kv heat shrinkable outdoor 400 mm2 - 3 core, j) cable kits 11 kv heat shrinkable outdoor 240 mm2- 3 core, k) cable kits 11 kv heat shrinkable outdoor 185 mm2- 3 core, l) cable kits 11 kv heat shrinkable outdoor 120 mm2- 3 core, 11 kv straight through joints, 11 kv cable straight through joints heat shrinkable 240 sqmm - 3 core, 11 kv cable straight through joints heat shrinkable 185 sqmm - 3 core, e)11 kv cable straight through joints heat shrinkable 120 sqmm - 3 core, control cable, a) 2.5 mm2 cu 2-core, b) 2.5 mm2 cu 4-core, c) 2.5 mm2 cu 6-core, d) 2.5 mm2 cu 8-core, e) 2.5 mm2 cu 10-core, f) 2.5 mm2 cu 12-core, g) 2.5 mm2 cu 16-core, battery chargers & battery bank , maintenance free 32 v lead acid battery (vrla) bank comprising of 16 nos of 2 volt cells of 100 ah capacity make hbl, exide, amaraja etc, 32 v battery charger automatic (float & boost) compatible for vrla batteries, 3 phase, 415 v ac , 50 hz ,4 wire 36 v , 30-40 a, with 4 outgoing feeders and with all protections, 33 kv & 11 kv insulators make iec, bhel, rastriya, top line, tcpl or any other reputed make conforming to relevant is specification , 33 kv post insulator 24 mm, 11 kv guy insulator 90 x 65, 33 kv hardware fittings, 33 kv tension fittings for acsr dog conductor, t & c 3 u-bolts type (approx. 2.8 kg) al wt 400 gm, 33 kv suspension fittings for acsr dog conductor -( wt 1.8 kg), spares for 11 kv vcb panels, a) male / female contacts mei make, b) 11 kv pt fuse, c) 11 kv vcb bottle assembly bracket, d) shower contact mei make, e) shower contact crompton greaves make, spring charging dc motor for 11 kv vcb panel( make delco), tripping coil suitable for vcb panels (operating voltage 30-36 volt dc) with plunger, ampere meter 96mm x 96 mm for 11 kv vcb panel (digital), voltmeter 96mm x 96 mm for 11 kv vcb panel (digital), indicator lamp for vcb panel voltage 50-250 v ac/dc., tnc switch for 11 kv/ 33kv vcb panels, space heaters with thermostat for 11 kv vcb panels, 11 kv vacuum interupter bottle with makes, a) g.e., b) crompton greaves, c) allind, d) alstrom, e) bhel /a.b.b, master trip relay ashida (make) 18-52 (v), 11 kv cts resin cast of different ratios, make mei/ bicco lawrie / crompton greaves / bhel/ er/ ssg/ alstorm/ megawin/ sudhir/electricfield for 11 kv vcb panels(indoor/outdoor), i) 800/400/

Trust

CTN :45342958

30 May, 2026 NA

Katra - Jammu And Kashmir

Tender For supply of miscellaneous electric items- steel tubular 9 meter long pole (st-410 sp3, steel tubular 8 meter long pole (st-410 sp1:, 16 kn polymer shackle insulator, 1.1 kv (low tension), go set 11 kv hd, ab switch 3 phase, 3-pole 200 amp, vertical; type with rod heavy duty, 11 kv horn gap fuse set (hg set) 3-phase 4 amp polymer type heavy duty, galvanized nuts and bolts full thread with was 4" & 6" heavy duty, anti climbing device with clamps, galvanized stay set with 50*8 mm stay clamp guy insulator (02 no.), anchor plate (200*6mm nuts-bolts, 2 nos turn buckets, 1.8m long, 16 m diameter solid gs stay rod & 7/15 mm dia gi standard wire complete., guy/stay wire 7/14, galvanized steel, typicall hot-dip zinc-coated for corrosion resistance, guy insulator, led street lights 70/72 watt, pressure die ca aluminum housing only, system lumen output 120lm/w, cct: 5700-6500°k, cri≥ 80, thd≤1 surge 4kv, pf >= 0.95 ip66, warranty minimum -years, pvc cable 3 core 2.5 sqmm, mukki clamps, rabbit conductor acsr 50 sq.mm, gi u-clamp for shackle insulator with pin / nu, lt line spacers, high quality rigid pvc (poly vinyl chloride) or polypropylene, with uv stabilization for weather resistance