Get complete information related to latest Electronic Pen Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Electronic Pen Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Electronic Pen Tenders.
Tender For supply and installation of modular power supply arrangement for vdu (42"- 85") and embed ded pc with input and output redundancy arrangement and hot pluggable modules having voltage & load c urrent digital display on each module each set consisting of- 1. isolated inverters (master/slave with auto c hange over )-2 nos input 110vdc, output 110 vac, 500va (as per rdso tan no. sts/etan/3012 version 3. 0 dated 03. 11 .22) 2. isolated dc-dc converters- 02 nos connected in parallel with built in o-ring diode, ac tive current sharing as per rdso spn/165/2023 version 4.0 or latest (input 110vdc, output:24 vdc/10a) 3. input (redundancy) o-ring diode module with two input sources and one output supply along with potential free contacts, alarm and acknowledgment switch. 4. 3u stainless steel rack with back panel mother board a nd front panel power connectors inverter auto changer over switch and all required over switch and all req uired protection circuits ( 3u height for main rack 132.5mm +/- 10% & 1u height for mounting 44.5mm +/- 10%) quantity; 1 no. ( total 4 items ) dc-dc converter make : gallant or similar. [ warranty period: 30 m onths after the date of delivery ]
Tender For supply of instruments as per nit documents-, lcr-series- resonant frequency impedance at resonance -quality factor and band width, , make: de tech, , to study the response curve of a series lcr circuit and determine its (a) resonant frequency, (b) impedance at resonance, (c) quality factor and (d) band width, , to measure the voltage across the inductance (l), capacitance (c) & resistance (r) of a series lcr circuit for different frequencies of the input voltages with the help of an ac millivoltmeter & hence 1) to study the variation of impedence of l & c with frequency of the impressed voltage, 2) to draw the resonance curve of the series lcr circuit & to determine the q factor of the circult., , complete with audio oscillator sine wave 0-10v p-p 10khz with digital frequency counter, digital ac voltmeter, digital ac ammeter or voltmeter, digital frequency counter, different values of l, c & r. complete in all respect with detalled manual., , multimeter, digital. low cost heavy duty reliable for student use, , make: imported, , to measure v, i, ohms, transistor hfe, continuity check, diode check. low cost student model., , digital multimeter, lcr model:451, , peak hold facility, , display: 3-1/2 digital 1999 counts backlit lcd low battery and overload indication confirms to iec1010 standards, , auto power off, , dc voltage: 0-200mv/2v/20v/200v/1000v accuracy: +0.5%, , ac voltage: 0-200mv/2v/20v/200v/750v accuracy: 0.8%, , dc current: 0-2ma/20ma/200ma/20a. accuracy: 0.8%, , ac current: 0-2ma/20ma/200ma/20a. accuracy: 1.0%, , resistance: 0-200/2k/20k/200k/2m/20m/2000m.ohms accuracy: 0.8%, , capacitance: 0.20nf/200nf/2uf/20uf/200uf accuracy: 2.5%, , frequency: 0-2k/20k/200k/2m/10mhz accuracy: 1.0%, , inductance: 0-2m/20m/200m/2/20h accuracy: 2.5%, , temperature: -40c-1000c accuracy: 1.0%, , diode test, transistor test and audible continuity test facility., , apparatus for determining variation of thermo emf of, , thermocouple using temperature difference of two junctions, , make: de tech model: dt-temf, , potentiometer with jokey[10 no wire] power supplies:, , dc supply ic regulated +2/4v dc, 500ma. meters: digital voltmeter dc (dual range) digital ammeter dc (dual range) digital galvanometer, , as null detector components are mounted on the panels are: 2 dial decade resistor box on board., , salient features:, , front panel built with high class insulated printed circuit board sheet with well printed circuits and symbols., , instruction manual., , connections are brought out through 4mm colored sockets., , patch cords 4mm., , the trainer is housed in abs plastic cabinet. size of the trainer set 12"x10" accessories with trainer:, , 10 wire potentiometer electrical kettle constantan thermocouple glass beaker thermometer, , set up to determine the co-efficient of thermal expansion of a metal by optical lever & traveling microscope., , make: de tech, , complete experimental set. 1.pullinger's apparatus, , two 1 meter long concentric pipes fitted on a wooden bracket with metal base. outer pipe is covered with asbestos rope & has arrangement for thermometer holes & also steam inlet & outlet at upper & lower ends. supplied with 1 meter long aluminum & steel rods of 1/4" dia. to be inserted inside inner tube., , study of vi and power curves of solar cells, and find maximum power point and efficiency, , to draw v and i characteristics of solar cell and find maximum power and efficiency., , the apparatus consists of optical bench with uprights (length: 1 mtr), cell mounted, meters are fitted on panel with power supply and lamp house with power supply., , measurement of stefans constant using black body, , radiation., , make: de tech model: dt-sbbr, , measurement of stefans constant using black body radiation., , complete with stefans conatant apparatus, very high sensitive light spot galvanometer with sensitivity control, high quality thermocouple.3 it cu boller, rubber tube, electrical heater w
Tender For supply of kcl and kvl trainer kit , measurement of power and power factor , study of phenomenon of resonance in rlc series circuit , connection and measurement of power consumption of a fluorescent lamp , determination of parameters of ac single phase series rlc circuit , determination of 1 voltage ratio 2 polarity and 3 efficiency of transformer , demonstration of cutout sections of various machines , ohm law trainer kit , thevenin theorem trainer kit , norton theorem trainer kit , maximum power transformer theorem trainer kit , transistor characteristics kit , logic gates digital trainer kit , pn junction diode trainer kit , zener diode trainer kit , diode based half wave and full wave rectifier kit , consumable items , electrical workbench
Tender For supply installation and commissioning of various equipment for the ug and pg laboratories of the department of physics, dibrugarh university - study the motion of a spring and calculate (a) spring constant. (iron weight), low resistance by carey foster s bridge, gouys method with digital weight scale, study of b-h curve with deep, plancks constant by led, zeeman effect experiment kit, stefan s constant experiment kit, the boltzmann constant using v-i characteristics of pn junction diode, michelson interferometer kit (with diode laser), newtons rings experiment kit, fresnels bi prism experiment kit (with sodium source), polarimeter experiment kit (polarization), elastic constants of a wire by searle s method(without telescope), meldes experiment kit, theboltzmann constant using v-i characteristics of pn junction diode, decade condenser box 0.01mf to 0.11mf, decade condenser box 0.001mf to 0.01mf, decade condenser box 0.01 f to 1 f, fet characteristics, zener regulated power supply, mosfet characteristic, digital to analog converter, study of flip-flop, ac millivoltmeter, transistor tester, e/m apparatus magnetron valve method, e/m apparatus bar magnet method, milliammeter (0-1) ma, (0-10) ma, (0-100) ma, determination of j experiment, hydrogen spectrum, to determine the coefficient of thermal conductivity, mercury light source with choke and wooden box, sodium lamp with transformer and wooden box, bnc to crocodile clip cable, breadboard wire, 12v centre tap transformer, 9v centre tap transformer, ic-741, ic-555, lm-341, ic-7400, ic-7402, ic-7486, ic-7805, ic-7812, ic-7912, ic-7404, ic-7401, bc-107b, bc-547, capacitor-pf-103, capacitor-pf-104, banana cable, fuse holder, led holder, on/off switch-2pin, milliammeter (1-10) ma, microammeter (1-100) microampere, multimeter, 100mhz dso (ds1102z-e), 25mhz awg (dg-822), 100mhz dso (dho-814)
Tender For supply of 250ma for mhs, maithon, dvc , potentiometer for manual voltage adjustment 10k ohm_3w for phps, panchet, dvc , potentiometer for manual voltage adjustment 10k ohm_3w for mhs, maithon, dvc , sync. transformer for scr controller unit for 150a float-cum-boost charger, 0-270- 300v_80-0-80v, 100ma for phps, panchet, dvc , sync. transformer for scr controller unit for 150a float-cum- boost charger, 0-270-300v_80-0-80v, 100ma for mhs, maithon, dvc , filter capacitor, 4700 micro farad_ 350 volt dc for phps, panchet, dvc , filter capacitor, 4700 micro farad_ 350 volt dc for mhs, maithon, dvc , blocking diode for battery charger for phps, panchet, dvc , blocking diode for battery charger for mhs, maithon, dvc , ac supply fail relay card static type 415v ac for phps, panchet, dvc , ac supply fail relay card static type 415v ac for mhs, maithon, dvc , semiconductor protection fuse, high speed, 200a for phps, panchet, dvc , semiconductor protection fuse, high speed, 200a for mhs, maithon, dvc , thyristor 150a, 1200v _h150tb12 for phps, panchet, dvc , thyristor 150a, 1200v _ h150tb12 for mhs, maithon, dvc , battery protection fuse _200 a hrc type for phps, panchet, dvc , battery protection fuse _200 a hrc type for mhs, maithon, dvc , dc voltmeter selector switch _16a, 1pole, 4 way spa3116d for phps, panchet, dvc , dc voltmeter selector switch _16a, 1pole, 4 way spa3116d for mhs, maithon, dvc , integrated dc sensing module consisting of circuit - ch. failure, dcu_ovr, befr, fbcor, sfr, auto equalise for phps, panchet, dvc , integrated dc sensing module consisting of circuit - ch. failure, dcu_ovr, befr, fbcor, sfr, auto equalise for mhs, maithon, dvc , dc power supply for idsr card _static type, 24 v and 12 v dc for 150a float cum boost charger _make_ chloride for phps, panchet, dvc , dc power supply for idsr card _static type, 24 v and 12 v dc for 150a float cum boost charger _make_ chloride for mhs, maithon, dvc
Tender For corrigendum : supply of supply of keltron make spares pcb for inverter - ms keltron make actual value pcb, us-2710av1a for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs. , supply of ms keltron make buffer pcb aw 205 800 238 for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of ms keltron make bypass controller pcb un712 for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of ms keltron make charger regulator pcb un710b for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of harmonic capacitor 36mfd 415v ac 1-phase for 1.5 kva inverter , supply of ms keltron make inverter logic pcb un700 for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of ms keltron make inverter regulator pcb un-0713a for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of ms keltron make inverter transistor base drive pcb uns-3706 for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of ms keltron make mother board uns 3704 for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of ms keltron make parallel operation pcb un720 for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of ms keltron make power supply pcb un0974 for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of ms keltron make remote alarm pcb un0702a for 1.5 kva inverter and supplier shall submit the test report of supplied pcbs , supply of transistor 2d1 150 m-050 dual pack- with freewheeling diode on heat sink trg- 21 for 1.5 kva inverter. , supply of dc spike protection capacitor 0.47 mfd and 1200 v, type no. 940c12p4k, cdet for modification , pcb installation and testing charge for unit-3and4 at site
Tender For supply,installation,testing and commissioning of testbench to test electronic components lik e resistor, capacitor, diode, pcb and other smd circuit. the list of items required is as detailed below 1. m ulti-function rework system 2 in 1 and smd rework station industrial grade 50watt soldering station 200 to 4 80 temperature hot air 580watt - 01 no. 2. programmable dc power supply 36v 6a with usb interface - 01 no. 3. helping hand magnifier soldering stand with 2 led lights for pcb soldering works (35x/12x65mm/17 mm lens, dual mode) - 01 no 4. bench top multimeter true rms 1000v dc ac,20a dc ac with backlight hd display 20000 counts-01 no. 5. hot melt-super heavy glue gun 200 watt 8 hours long durability glue gun wit h nozzle protection me 2000 corded electric-01 no 6. esd antistatic mat 2 layer size 1mtr x 10 mtr esd s afe green rubber mat thickness 2mm - 02 no's [ warranty period: 30 months after the date of delivery ]
Tender For analog and digital electronics lab equipment - purchase of analog & digital electronics lab equipment for eee department, vi characteristics of pnjunction diode and zener diode kit built in power supply (0-6v) for forward bias and (0-24v) for reverse bias to carryout forward and reverse vi characteristics of pn junction diode experiments provision to connect desk top meters externally, wooden closed cabinet, characteristics of bjt in ce configuration kit to carryout input and output characteristics of npn transistor in ce configuration necessary power supplies provision to connect necessary digital meters externally legend printed in the pcb necessary test points wooden closed cabinet, vi characteristics of fet & ujt kit built in 0-6v power supply in the input side and 0-30v power supply in the output side to carryout drain output characteristics and transfer characteristics of jfet experiments provision to connect necessary desk top meters externally, wooden closed cabinet., half wave rectifier with and without filter kit to observe variation in the ripple with load current without and with filter to observe voltage regulation with load current without and with filter provision to connect necessary desk top meters externally legend printed in the pcb necessary test points wooden closed cabinet, bridge rectifier with and without filter kit to observe variation in the ripple with load current without and with filter to observe voltage regulation with load current without and with filter provision to connect necessary desk top meters externally legend printed in the pcb necessary test points wooden closed cabinet, inverting amplifier and non-inverting amplifier using op-amp ic 741 and test its performance kit. to carry out the inverting amplifier, non-inverting amplifier, provision to connect resistances built in two variable voltage sources and power supply for op-amp legend printed in the pcb wooden closed cabinet, summing amplifier and difference amplifier using op-amp ic 741 and test its performance kit summing amplifier and difference amplifier, voltage follower experiments provision to connect resistances built in two variable voltage sources and power supply for op-amp legend printed in the pcb wooden closed cabinet, zero crossing detector and voltage comparator using op-amp ic 741 and test its performance kit. zero crossing detector and voltage comparator experiments provision to connect resistances built in two variable voltage sources and power supply for op-amp legend printed in the pcb wooden closed cabinet, astable multivibrator circuit using ic 555 and test its performance kit to carryout schemitt trigger, astable multivibrator andmonostable multivibrator experiments provision to connect resistances and capacitances to change the frequency. built in power supply legend printed in the pcb necessary test points wooden closed cabinet, kit to test the performance of ic voltage regulator power supplies using ic 7805, ic 7912. to carryout schemitt trigger, astable multivibrator and monostable multivibrator experiments provision to connect resistances and capacitances to change the frequency. built in power supply legend printed in the pcb necessary test points wooden closed cabinet, realization of basic gates using nand & nor gates. digital ic trainer kit with 16 digital input as toggle switch digital ic trainer kit with 16 digital output as led. two bread board on board fixed clock 2-digit bcd segment one buzzer, half adder and full adder circuit using discrete ic s and test its performance. digital ic trainer kit with 16 digital input as toggle switch digital ic trainer kit with 16 digital output as led. two bread board on board fixed clock 2-digit bcd segment one buzzer,mono pulse., parity generator and checker using parity checker/generator ic s and test its performance. to wire 3 bit parity generator and reader using logic gates to test 8 bit parity generator and reader using ic signal inputs and led out