Latest electronic regulator scrap Tenders | Government electronic regulator scrap Tenders

State Government

CTN :45459140

18 Jun, 2026 1.73 Lacs

Kangra - Himachal Pradesh

Tender For corrigendum : erection, testing, commissioning for providing lt extension for prov. 1- phase lt line connection for pump house constructed under hpshiva project at agojar cluster wrt. dev. block panchrukhi from ext. 11/0.4 kv, 63 kva under e-section rakar uesd prk

State Government

CTN :45519053

19 Jun, 2026 9.68 Lacs

Kumarghat - Tripura

Tender For repairing of cidipvc pipelines, leakage, remodeling, washing, extension of pipeline, maintenance of domestic connection of pecharthal r.d block under dws sub-division pecharthal during the year 2026-27 north side of deo river.

State Government

CTN :45519054

19 Jun, 2026 9.68 Lacs

Kumarghat - Tripura

Tender For repairing of cidipvc pipelines, leakage, remodeling, washing, extension of pipeline, maintenance of domestic connection of pecharthal r.d block under dws sub-division pecharthal during the year 2026-27 south side of deo river.

State Government

CTN :45516386

20 Jun, 2026 4.82 Lacs

Malappuram - Kerala

Tender For converting the connection block between chemistry and biotechnology wing as dining hall

State Government

CTN :45430547

29 Jun, 2026 36.73 Lacs

Amritsar - Punjab

Tender For corrigendum : drilling, installation of new pvc t/well pumping set house connection for existing and new pipe line, prov laying jointing testing pvc pipe for distribution system, replacement of control panel, repair of pump chamber ohsr all other works complete - balance work for 09nos. schemes 18 nos. villages providing improved access to water through household connection in various existing water supply schemes block ajnala distt. amritsar.(under jal jeevan mission/nwqsm/nabard xxvi) (section-iv). 1.tera rajputtan 2. ballarwal 3. fatehwal 4.riyar 5. sarai 6. talwandi rai dadu 7. vanjanwala 8. nangal wanjanwala 9. dabur basti block ajnala distt amritsar. (under surface water project kandowali) drilling installation and commissioning of pvc t/well, providing house connection for existing pipe line & new pipe line prov. & laying jointing, testing pvc pipe, specials for distribution system, sluice valve, chamber, chlorinator, replacement of control panel, repair of pump chamber, repair of ohsr & development of water works etc. & all other works contigent there to complete in all respect.

State Government

CTN :45430548

29 Jun, 2026 31.74 Lacs

Amritsar - Punjab

Tender For corrigendum : providing improved access to water through household connection in various existing water supply schemes block majitha distt. amritsar. under jjm-nwqsm- nabard xxvi section 13-2 part of surface water project gaunsal afgana -kandowali

State Government

CTN :45430549

29 Jun, 2026 45.02 Lacs

Amritsar - Punjab

Tender For corrigendum : prov. house connection for existing and new pipe line prov. laying jointing testing pvc pipe specials sluice valve chamber chlorinator replacement of control panel repair of pump chamber ohsr and all other works complete in all respect - providing improved access to water through household connection in various existing water supply schemes block majitha distt. amritsar.(part of surface water project gaunsal afgana ) (under jal jeevan mission/nwqsm/nabard xxvi) (section-15 part-ii). 1. chachowali 2. thariewala 3. waryam nangal 4. bhangali khurd & gujjerpura 5. bhangali kalan block majitha distt. amritsar). providing house connection for existing pipe line & new pipe line prov. & laying jointing, testing pvc pipe, specials for distribution system, sluice valve, chamber, chlorinator, replacement of control panel, repair of pump chamber, repair of ohsr & development of water works etc. & all other works contigent there to complete in all respect.

CTN :45384476

17 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For corrigendum : purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45523797

03 Jul, 2026 8.01 Crore

Paschim Medinipur - West Bengal

Tender For strengthening and protection of te2h2 embankment of right bank of river old cossey for a length of 5000 m.in between ch.0.00 km. an 12.00 km from mouza tituan to bhawanipur in block and p.s. debra dist paschim medinipur in connection with ghatal mas

CTN :45399907

19 Jun, 2026 27.98 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : supply of hydraulic spares of side arm chargers and wagon tipplers at chp, sstps, suratgarh - d.c.valve:4we6d6x/eg24n9k4 with solenoid &connecter or equivalent, d.c.valve:4we6y6x/eg24n9z4 with solenoid &connecter or, equivalent, hose pipe dko12s l=1200mm one side 90 bend, fittingstraight, connector : 12sr x ½" port connection size : g 3/8", hose pipe dko 38 sx 1000 mm, r13 with end fittings, hose pipe dko 12s x500mm,, one side 90 deg. with end, fittings, hose pipe dko 12sx 900mm,, one side 90 deg. with end, fittings, hose pipe dko 12s l=900mm, one side 90 deg. bend with,, fitting- straight connector : 25, sr x 1" port connection size, :19 dia, hose for sac :, hose pipe dko 12s l=500mm, one side 90 deg. bend with end, fittings, hyd. hose din 20022/en 853-2sn dn 40 i.d. 1.1/2'' w.p. 90, bar/1300 psi exceeds sae 100, r2 at l-6 mtr., hyd. hose sae 100 r1 at-10- i.d. - 5/8" l-6 mtr. working, pressure 350 bar/5100 psi, hyd. hose din 20022/en 853-2sn dn 20 i.d. 3/4'' w.p. 215, bar/3100 psi exceeds sae 100 r2 at l-1.6 mtr., hyd. hose din 20022/en 853-2sn dn 8 i.d. 5/16'' w.p. 350, bar/5100 psi exceeds sae 100 r2 at l-1.6 mtr., sae 100 r13-20 or eq. id 1-1/4'' with std end assy. on one, end m52x2 fs'o' ring type straight and other end with, m52x2 fs'o' ring type 90 degree swept elbow suitable, for 345 bar working pressue l-1.5 mtr., sae 100 r1a-10 or eq. id 16 mm with std end assy. on, both ends having stand pipe of 18mm od x 30 mm long, suitable for working pressure 130 bar l-1.5 mtr., sae 100 r13-12 or eq. id 19 mm with std end assy. on, one end m36x2 fs'o' ring type straight and other end, with m36x2 fs'o' ring type 90 degree swept elbow, suitable for 345 bar w.p. l-1.5 mtr, sae 100 r1a-06 or eq. id 10 mm with std end assy. on, both ends having stand pipe of 12 mm od x 30 mm long, suitable for w.p. 180 bar l-1.5 mtr, hose: din 20022/en-853-2sn dn 19 id-3/4'' (19.0 mm) w.p., 3100 psi/215 bar (21.5 mpa) sae 100 r2 at length = 1 mtr, hose: din 20022/en-853-2sn dn 19 id-3/4'' (19.0 mm) w.p., 420 bar (42 mpa) sae 100 r2 at length = 1 mtr, hose: din 20022/en-853-2sn id-5/16'' (7.9 mm) w.p. 5100, psi/350 bar (35 mpa) sae 100 r2 at length = 1 mtr, d.c. valve :4we6j 6x/e g24 n9z4 with solenoid & connector, or equivalent, check valve :z2s6-1-6x or equivalent, dbl. throttle/check vlv:z2fs 6-2-4x/2qv or equivalent, d.c. valve :4we6d 6x/e g24 n9z4 with solenoid & connector, or equivalent, filter element: 0030d010bn4hc, filter element: 0160d010bn4hc, filter element: 0330r010p, cylinder for charger uncouple 40x20x220 mm, cylinder for arm delatching 40x20x60 mm, complete seal kit consisting of piston seal, rod seal, wiper seal,, o-ring, back-up ring 140 mm dia bore x 80 mm dia piston rod x, 1400 mm stroke hydraulic cylinder(type 0627658), return line filter element type- cfr-250-12-10, manifold block: c-sk-2639-a1 or equivalent, return line filter element type- cfr-630-20-25-g, throttle cum check valve drv7-16-532-00 or equivalent, relief valve : r4v06-001-10a1 or equivalent, pilot operated check valve: c4v06-0g3-4b1 or equivalent, throttle valve dv7-16-532-00 or equivalent, dc valve part no. 4we6d or equivalent, shut off valve part no. khbg-1/4''-1-1-1-2 or equivalent, d.c. valve 4we6j with solenoid coil (double)and connector or, equivalent, pressure control pilot: mcv116g4201 or equivalent, pressure switch ips-14-100 or equivalent, shuttle valve sl06-s10 or equivalent, double throttle cum check valve zrd-05-ab-0 or equivalent, relief valve part no.r4v06-561-10a1 or equivalent, relief valve part no. r4v03-591-10a1 or equivalent, check valve part no.c4v06-560-4b1 or equivalent, shuttle valve part no. sl-06-t02-10 or equivalent, inline throttle check valve part no.drv-6 or equivalent, throttle/check valve part no.-z-2f-s6-30 or equivalent, dc valve :3d02-34-207-03-02-00a1-07-07327 or equivalent, dc valve: 3d06-35-b01-03-03-24b1-07538 or equivalent, relief valve : ng6-50 bar or equivalent, suction strainer: sc2-100 or eq

Electronic Regulator Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

State Government

State Government