Latest electronic sensor Tenders | Government electronic sensor Tenders

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

Central Government/Public Sector

CTN :45702798

02 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot miscellaneous scrap - 98414501: cond. & u/s. electrical scrap consiting of inverter ,transformer for pre cooling, battery charger sorts and size, stabilizer, current regulators,ac/dc welding rectifier/plant,chokes, meters, capacitors, led lights/tube, vacuum cleaner, knob, torch lights of sorts and sizes, coach guidence parts, switches of various types, electrical parts, ballast, street lights, nugger, chokes, chargers, regulator, pre cooling switch,roof mounted electric loco ac cab,frequency controller, starter, fuse, terminals,timer relay, kwh meters, circuit board, amplifier, panel board, led light,socket,tube light holder, multi colour lamp, digital tempreature meter, chargeable lamp, soldering iron, tester, volt meter, various type of meters, insulation tester, megger,solar board and water heater,solar sets, analog starter,tlb instrument,different type of dlb instrument,boost charger, sms alert,holder, electric detector, ethernet card, relay panel, ups, smps atx, lan extender,port switch, media converters, optical fiber cable equipment, ethernet switch,ara terminal/fuse, recttifier,dc dc converter, earth electrod,vhm charger,head lamp, relay timer ,led lamp,led shunt routesolar panel,spd,spt, trasmitter,receiver,alarm system,smr ei, cab ac,pressure gauge, multimeter, heating elements, speaker, amplifier, lamp shades, speedometer,vcd,different type of relay,base assembly,pcb card,program switch,bl box,different type of ammeter,pedal switch,ups various,fl choke,single phase meter,mcb various amps,electronic timer switch,single phasing preventer, ballast off size,capacitors of various sizes,fan regulater, and such other similar electrical scrap as is where is condition. note: 1).if any non ferrous items found in loose conditon should be returned to the custodian,(2) pick and choose not permitted. (3) crane/jcb loading permitted.location: tree no.04 ,middle of scrap yard /ssd/ptj.

State Government

CTN :45397974

24 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l

Central Government/Public Sector

CTN :45579804

07 Jul, 2026 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - dhq 10 icgs c 407; fire detection system indicates the following alarm on control panel , fuse blown of motherboard and low voltage of battery being indicated on control..

CTN :45332546

23 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of eprom mpu24/mem5-02 programmed , panel rcs-fpp/04 , corrosion inhibitor rust ban 326 , snap ring 32x1.5 din 471 , computer accessories , plug-in board , screw m10x150 , gasket , pressure gauge 0-10 bar , temperature monitor , instrument , o ring 39.2x3 , plug-in board , telephone cable , thermocouple , adjusting washer , soldering iron stand , woodruff key , o ring , actuator vlv , cylinder head with valve , paste ultra therm mtu , pressure hose , oil filter , o ring , molykote paste g-n plus , gasket liquid loctite 573 , clamp , terminal , plug in board cob9-01/a , pressure sensor , relay 24v / 4a , conversion kit f/series 4000 (5205304531) , illuminescent diode , signal lamp , mpc1-01 card f/computer a.741620/741634 , software , tool bag , module cob 8-01 , diskette , housing , temperature sensor pt100/110mm , plug-in board , male connector , speed sensor , plug-in board sab 1-03(5295308912) , coolant level sensor , flashing lamp red , plug-in board cib 3-02 , plug-in-board not adjusted , speed transmitter dm52 , pressure sensor 1600 bar/r , relay , terminal , pressure sensor , flashing light , blue , fuse fk2/6a , terminal(0055314981) , terminal strip_0045310081 , fuse 2a fk2 , pressure sensor , switch , terminal block , pressure sensor 6 bar(sw) , fuel filter primary(lcm) , plug , w/p repair kit , relay , printer , thermal actuator , plug in board dfc 2-01 , display unlabelled , connection interface for monitoring , cable for monitor system , switch , loctite nr 510 surface sealant , plug , union , bolt m20 1.50x103.0 lg 18 conrod , switch , plate guard g73 , switch , bushing , bushing , modular system , led , conn fuel rail rear , diode m.kuelkoerp , plug in board mpu 30-02 , track-ball , cable , plug-in board , cover , automatic cutout , multi led 5 5k blue , plug in board , male connector , control lever ros 2 03 , fuse , control lever , o-ring , plug - in board , nut , sealing ring , keyboard english , terminal , wiring harness to injector , mpc 1 01 card f computer , silcone rubber loctite 5970 , compensating washer , plug-in board , switch , washer , shaft wtr pmp hi temp clg circuit , guide ring , valve keeper wedge , plug-in board , plate , flow restrictor , plug-in-board , plug in board , filter element , adaptor , modular system , plug-in board rob1-01 a , inb 1 , trackball , plug-in board , plug in board aib2-03 , aib 1 , plug-in board , plug-in-board , roller tappet , con rod bearing size 0-0 , pressure sensor , plug-in board , sealing ring , plug in board , bellows , transition socket , sleeve rubber , grommet , ring sealing a12x15.5 , hex nut , straight connector , rocker shaft , techometer , computer hard disc 2.5 60gb not adjuste , screw , eprom mem5 mcupps cps adjusted , audiable alarm , adaptor 10 6 n 15007 , plug , pressure spring , o ring , benjo screw , washer , o ring , plug in board , plugin board , washer , grommet , o ring , plug , drain valve , plug-in-board not adjusted , piston ring , washer , o ring , rtv , cover , split pin , level monitor bediaplca , terminal strip , contact block , module mcs 5 pim3 , oil seal high temp cirt pump , panel , repair kit , starter , bearing bushing , seal ring , circlip , seal ring , ring asm , contam indicator , fuel filter , pressure sensor , plug-in board

CTN :45439997

17 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of simulator workstation with rugged controller , drone simulator software licence standard , high fidelity simulator workstation with rugged controller , 3d simulation software licence advanced , vr headset 6 dof and sim compatible , trainer workstation with instructor simulator , 55 inch led display for trainer workstation , networking cabling and power management lan plus ups , workstation desk and ergonomic chair set , split air conditioner 1 and half ton , posters flex banners and cut section models , printer brother t4500 , high performance cad workstation , fdm 3d printer bambu h2d with ams combo , fdm 3d printer bambu h2s with ams combo , fdm 3d printer bambu x1 carbon with ams combo , filaments abs tpu pla plaplus assorted , filament dryer creality space pi x4 or equivalent , resin 3d printer prusa sl 1s or equivalent sla or msla with resin material , industrial 3d scanner creality otter or equivalent , laser engraver and cutter machine 40 watt , wooden tables chairs and workbenches set of 06 , power management fitting and backup inverter 2 kva , advanced drone repair equipment soldering station digital microscope esd mats oscilloscope , drone electronics sensors and spares kit , storage almirahs lockable , posters flex banners and cut section models , 3 axis drone stability test jig with proprietary software , bldc motor thrust test bench with proprietary software , drone sensor integration and testing equipment , gps testing equipment with proprietary software , flight controller assembly programming station , propeller balancer , battery charging and testing station , battery repair station , drone and 3d printer service tools , soldering and rework station yihua 982d iii or equivalet , esd workbenches , workstations for tuning or programming , line of sight trainer uav with controller , vtol trainer uav with mission planner tricopter or quadcopter , fixed wing trainer uav with mission planner , fixed wing vtol uav system with day and night camera dooaf module , day and night enabled quadcopter with dooaf capability , surveillance and payload delivery drone with mission planner hexacopter or octacopter , storage box for drones and accessories , storage almirahs , lab tables and workstations with storage , split air conditioner 2 ton , interactive panel 75 inch or larger 4k uhd, multi touch with ops , 55 inch led display , study chairs with ergonomic and stackable , split ac 1 and half ton , 20 day training programme for 15 individuals with flying repair fabrication with study material , soccer drones with propeller cage , soccer drone arena including netted enclosure with goal posts //bid details 2 / 41

CTN :44746290

17 Jun, 2026 NA

Raigad - Maharashtra

Tender For bid to ras supply of alarm system control panel ip based system support upto 30 connections features: end points provisio , fiber splicing as per project requirement (qty 01 job) , fiber & network patch cord (qty 30 pcs) , fiber junction box (qty 15 pcs) , 4 port gigbit unmanaged poe network switch with 2 port sfp (qty 15 pcs) , poe injector (qty 15 pcs) , alarm audio station sensitivity: 96+ 3db/1m/1w amplifier: 5w single channel d class rate power: 8 ( , master station for control room 7" touch screen color display embedded 1080p camera (qty 01) , suitable wiring for the project (12 core fiber wire 4200 mts, cat6 cable 305 mtrs, power cable 195 m , wire laying major portion wall to wall except 4 entry gates concerete digging portion as per sight n , conduit for wire (qty 4000mtrs) , network rack for the network equipment (qty 1) , wooden stand for master station (qty 3 pcs) , network switch and gateway (3 pcs) , sfp module (qty 30 pcs) , power point with fuse (qty 14) , vandal proof metal enclosure (qty 13 pcs) , capping casing accesories and drilling equipment (qty 1 lamsum) , pvc junction box (qty 15 no. ) , supply installation testing and commissioning (1 job)

CTN :45199569

08 Jun, 2026 NA

Multi City - Multi State

Tender For supply of spares for ht & lt system, flood, drainage and dewatering sump", - closing coil 110vdc (for 11kv hwx vcb), tripping coil 110v dc (for 11 kv hwx vcb), agni motors bangalore-, 91type:sg301s1 v: 220ac/dc w:150 a:1.6 rpm: 100 i.cl: f duty: s2-5 min, vaccum interrupter (vg2, for 11kv hwx vcb), epoxy body (for 11kv hwx vcb), 11kv hwx mechanism. with (110v dc coil & 230 v motor), 11kv gang operated (go) switch, 11kv 120 mm². straight through jointing kit., 11kv 120 mm² termination kit, 11kv 240 mm². straight through jointing kit., 11kv 240 mm². termination kit., hdz-70-401, she 48.131.370-05 s2:8 5, ac230-240v 50-60hz 380 w, 5000r/min 6.0 a,, closing coil (110v dc, hvx-o, 33kv vcb), tripping coil (110v dc, hvx-0, 33kv vcb), service & test position limit switchs, (hvx-0, 33kv vcb), camp, disc complete (hvx-0, 33kv vcb), spring charging drum assembly ((hvx-0, 33kv vcb), rack-in & rack-out screws (hvx-0,33 kv vcb), 33kv gang operated (go) switch, 33kv 240 sq mm. straight through jointing kit., 33kv 240 mm². termination kit., single phase surge arrest, 9kv, 10kv, float switch (level sensor) with cable, mounting screw and termanal box 16(8) a 250 v, t-80, pressure gauege 0-16 kg/cm³ en-837-1, power contactor mo 250, 250a, 3p, 240v ac coil, aux 2no+2nc contacts, mccb, with magnetic release mccb, with magnetic release dsine dn3-630m 630a, 3p 50ka, 415vc,, power contractor mnx250 250a, 3p, 240vac coil, aux 2no+2nc contacts, power contractor with 240vac coil mnx650 650a, 3p, 240vac coil, aux 2no+2nc contacts., power contractor with 240vac coil mnx300 300a, 3p, 240vac aux 2no+2nc contacts, power contractor with 240vac coil, mo110, 110a, 3p, power contractor with 240vac coil, aux 2no+2nc contacts, rto-4, 72-110a bimetal overload relay, direct mounting (class 10), 1no+1nc auxiliary contacts with build in spp (single phasing protection), bimetal overload relay mn12 135-255a bimetal overload relay, direct mounting (class 10), 1no+1nc auxiliary contacts with build in spp (single phasing protection), bimetal overload relay mn12 180-300a bimetal overload relay, direct mounting (class 10), 1no+1nc auxiliary contacts with build in spp(single phasing protection), 6a control fuse link 415v ac, type: pq8n ch2j 1myn563613-ead tripping relay (86) flush mounting, case size 1/2, contacts 4no+3nc hr with hr flag aux volt 220 v dc, tripping coil, mo1 220-250v dc/ac, eq96 moving iron ammeter: range: 0-500a 500/1a, 250/1a, 50hz., thermostat bater cord 20-17 15a, 250v, 50hz., relay cr-m220vdc 4 1svr405613r9000, panel door handle 11kv, station auxilliary board dyear), mccb operating handle ohg45h9k handle, shunt open. release, 220/240v e1/6-t8, led panel light om-x, 3/5w/230v, omega, omo 10 33kj o resistor 33k/10w, 5%-with bakelite, power pack with battery backup input: 230vac, output: 220v dc, 0.5a, fuse 3a, slow blow for power pack, supply:230vac, 24vdc,, electronic magnetic flow meter line size: 200nb output:4-20ma, 2-7000lpm, max.w. p: 16kg/cm³, alarm range: 0-

Central Government/Public Sector

CTN :45011629

15 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of m.s. enclosure with all accessories for 20 fuse alarm system ( for twenty fuse) drg. no.s&t/by/f-346, 1,2 & 3. only valid iso:9001(qms) certified firm to quote. party to submit oem / authorization & test certificate with warranty.(shop no.09) [ warranty period: 30 months after the date of delivery ]

CTN :44735511

07 Apr, 2026 24.49 Lacs

Nagaur - Rajasthan

Tender For providing and laying lean cement concrete 1:4:8 in sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing complete as per clause 601, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.

Electronic Sensor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector