Latest electronics scrap Tenders | Government electronics scrap Tenders

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

CTN :45536897

22 Jun, 2026 20.00 Lacs

Leh - Jammu And Kashmir

Tender For supply of site clearance and amp earthwork is 1200,kero heater,pcc is456,rcc m20 footing and column and slab,reinforcement steel fe500,brickwork 230mm is1077 and flooring anti skid,internal plaster 12mm,doors flush and windows alluminum and glass,electrical led and wiring,plumbing and sanitary,ceiling gypsum vip,painting exterior and interior external lighting and poles,water supply tank and pump,transportation and logistics remote area,contingencies and solar panel 5kva and invertor and battery 5kva,generator 5 kva electrical led and wiring is 732,mirror 5 h 2w ft and bench 5 h 2w ft,chair plastic with arm,toilet sheet western with exhaust fan and water faucet and hand jet assy,electric fitting work,changing room 6 by 6 by 10 ft and bathroom 6 by 6 by 10 f,multipurpose hall structure,chair vip sofa and centre table,podium and tt table and carrom set,yoga mats fire extinguisher,86 inch interactive pannel,drainage and cement road work tin shed wk on viewer seating iron poles and tin sheet hooks screw and iron channel,gr

CTN :45384476

17 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For corrigendum : purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45419374

22 Jun, 2026 NA

Dantewada - Chhattisgarh

Tender For corrigendum : supply of computer , stock register , microwave , refrigerator , packing material for storage , sample reports , juicer mixer , basic knives set , weighing scale , measuring spoons and cups , bowls , scales , whisker , rolling pin , spoons , measuring spoons and jugs , sieves and relevant tools , fitments , hot cabinet , serveries , cleaning and sanitizing equipment , sample of escalation matrix , organisation structure , handouts of ipr guidelines , safety glasses , head protection , rubber gloves , safety footwear , warning signs and tapes , fire extinguisher , first aid kit , different types of linen , tableware , cutlery , crockery , napkin , table , chair , sample feedback form , bill book , card swiping machine , glassware , whiteboard , flip chart , duster , projector , projector screen , laptop , training kit , participant handbook and sops , markers , chalk box , electric induction , lpg cylinder , work station , tandoor , oven , deep fat fryer , kitchen work table , kitchen rack , dry storage cabinet , exhaust and fresh air fans , fly killer , steel stock pot , steel sauce pan , steel omelet pan , iron work , piping bags , slicer , whisk , muffins mould , tartlet mould , pie mould , bread mould , chopping board , steel skimmer , steel turner , steel ladle , steel rice colander , steel strainer , caramel custard mould , baking tray , ss storage tray , rotary cake stand , plastic crates , tandoor seekhs , parat , pizza cutter , ss katoris , tawa with handle , masala box , ac * /bid number : gem/2026/b/7600742 + /dated: 03-06-2026 ' ' / bid document 1 / 67

CTN :45529725

27 Jun, 2026 27.00 Lacs

Faizabad - Uttar Pradesh

Tender For supply of ammeters different range , battery eliminator , daniell cell , drawing board , friction apparatus complete set with weight box , galvanometer , parallelogram apparatus , key one way , jockey pencil type , two-way key , laclanche cell , meter bridge , multimeter digital , multimeter manual , magnetic compass , optical bench 1 meter long , prism indian glass , potentlometer , plier , cutter , screwdriver , scissor , resistance box , dry cell 10g chargeable , dry cell charger , helical spring apparatus with weights , rheostat , resistance coil different range 1-5 ohms , resonance appratus , spherometer , screw gauge , wooden scale 1 50cm 1 100cm , stopwatch , sonometer , sprit level , thermometer , tuning fork 250hz 480hz and 512hz withpad , vernier calliper , voltmeter different range , beakers , connecting wires , charts for display blovisuals , portraits as pe choice , concave mirror , convex mirror , convex lens , concave lens , wedge knife edge for sonometer , glass slab , pendulum box , cork rubber 1.5 inches , hanger weights 500 gm , insulated copper wire , meter tape 1-100 meter , soldering iron , spring balance 0- 250 gm , u-shaped magnet , copper calorimeter , epidiascope , newton disc , telescope , camera , barometer tube , lactometer , stove oil , electric bell , proof plane , binoculars , soldering rods , pn junction diod set up , desktop set , balance physical , boyle law apparatus , portnis barometer , metallic cylinders , metal sphere , sg bottles , grave sand apparatus , young modulus , spectrometer , hydrometer , sprit level , potentiometer , silk and cat skin pieces , tuning fork , ammonium chloride , all pins 1.5 , copper sulphate , drawing pins , thread rolls

CTN :45533690

20 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of electric industrial, metallic, non-metallic, e-waste - iron, cast iron, iron metallic, e-waste, machinery

CTN :45516488

15 Jun, 2026 NA

Gir Somnath - Gujarat

Tender For supply of 1. cement isi mark, 1 bag, 2. good quality sand and local sand, 12 tons or 1 tractor load, 3. stone/brick, 1 piece, 4. isi mark 20 mm, 1 kg, 5. iron scrap 40 mm, 1 ton, 6. notty wood (for door frame), 1 cubic meter, 7. office chair, plastic chair and table, 1 piece, 8. for water work, boring, fitting, sealing with 1 foot, 9. ied light pole or fitting with voltage proof, 1 piece, 10. 4 hp isi mark submersible pump and electric motor, 1 piece, 11. all types of pipes, pvc pipes, 1 meter, 12. 60 to 80 mm power blocks, 1 cubic meter, 13. water tank, isi mark plastic, 1 liter, 14. cement bench as per size, 1 piece, 15. white cement, 1 bag, 16. crushed stone and grit, 1 tractor load, 17. gutter line excavation and fitting, 1 meter, 18. well excavation, 1 piece, 19. water valve as per size, 1 piece, 20. dustbin small/large, 1 piece, 21. galvanized/cement sheet, 1 piece, 22. material for yajna mandap (flooring), 23. isi, electrical all materials, 24. labor for all works, 25. isi, computer set, 1 piece.

CTN :45516720

15 Jun, 2026 NA

Gir Somnath - Gujarat

Tender For supply of 1. cement isi mark, 1 bag, 2. good quality sand and local sand, 12 tons or 1 tractor load, 3. stone/brick, 1 piece, 4. isi mark 20 mm, 1 kg, 5. iron scrap 40 mm, 1 ton, 6. notty wood (for door frame), 1 cubic meter, 7. office chair, plastic chair and table, 1 piece, 8. for water work, boring, fitting, sealing with 1 foot, 9. ied light pole or fitting with voltage proof, 1 piece, 10. 4 hp isi mark submersible pump and electric motor, 1 piece, 11. all types of pipes, pvc pipes, 1 meter, 12. 60 to 80 mm power blocks, 1 cubic meter, 13. water tank, isi mark plastic, 1 liter, 14. cement bench as per size, 1 piece, 15. white cement, 1 bag, 16. crushed stone and grit, 1 tractor load, 17. gutter line excavation and fitting, 1 meter, 18. well excavation, 1 piece, 19. water valve as per size, 1 piece, 20. dustbin small/large, 1 piece, 21. galvanized/cement sheet, 1 piece, 22. material for yajna mandap (flooring), 23. isi, electrical all materials, 24. labor for all works, 25. isi, computer set, 1 piece.

CTN :45517078

15 Jun, 2026 NA

Gir Somnath - Gujarat

Tender For supply of 1. cement isi mark, 1 bag, 2. good quality sand and local sand, 12 tons or 1 tractor load, 3. stone/brick, 1 piece, 4. isi mark 20 mm, 1 kg, 5. iron scrap 40 mm, 1 ton, 6. notty wood (for door frame), 1 cubic meter, 7. office chair, plastic chair and table, 1 piece, 8. for water work, boring, fitting, sealing with 1 foot, 9. ied light pole or fitting with voltage proof, 1 piece, 10. 4 hp isi mark submersible pump and electric motor, 1 piece, 11. all types of pipes, pvc pipes, 1 meter, 12. 60 to 80 mm power blocks, 1 cubic meter, 13. water tank, isi mark plastic, 1 liter, 14. cement bench as per size, 1 piece, 15. white cement, 1 bag, 16. crushed stone and grit, 1 tractor load, 17. gutter line excavation and fitting, 1 meter, 18. well excavation, 1 piece, 19. water valve as per size, 1 piece, 20. dustbin small/large, 1 piece, 21. galvanized/cement sheet, 1 piece, 22. material for yajna mandap (flooring), 23. isi, electrical all materials, 24. labor for all works, 25. isi, computer set, 1 piece.

CTN :45511484

18 Jun, 2026 1.91 Crore

Firozabad - Uttar Pradesh

Tender For work of supply of materials under chief minister mass marriage scheme-- 05 sarees including blouses, 5.50 meters each (01 bridal saree/lehenga, 02 embroidered sarees, 02 printed sarees of premium quality), 05 petticoats (stitched to match the sarees), chunri - 2.25 meters (embroidered), trouser fabric (1.20 meters) (branded, premium quality), shirt fabric (2.25 meters) (branded, premium quality), fenta/gamchha (traditional scarf/towel) - 2.25 meters, steel dinner set (stainless steel, 8 kg excluding packaging), pressure cooker - 5 liters (isi marked), aluminium kadhai (cooking pot) - 5 kg capacity, trolley bag (branded, premium quality) 47(w) x 28(d) x 66(h) cm, vanity kit - 01 unit (in a fiber box), wall clock (branded, premium quality), ceiling fan - 01 unit (1200 mm, branded, premium quality), cooler jug - 10 liters (branded, premium quality), electric iron - 01 unit (branded, premium quality), double bed sheet - 01 (228.6 x 254 cm) with 02 pillow covers (sized to fit pillows) (premium quality), blankets - 02 single bed size (double-layered), 160 x 230 cm each (premium quality), mattresses - 02 single beds (pu foam) with covers, (182.88 cm x 91.44 cm), pillows - 02 (45.72 x 68.58 cm each) (high quality), sinhora (23) bangles (red glass) - 02 dozen, bangles (red glass) - 02 dozen, bangles - 04 (lacquer material).

Electronics Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government