Latest electrostatic detection apparatus Tenders | Government electrostatic detection apparatus Tenders

State Government

CTN :45498716

01 Jul, 2026 16.63 Lacs

Delhi - Delhi

Tender For supply of set up to find the coefficient of thermal conductivity of a good conductor (copper) using searl's me , setup to find numerical aperture of an optical fibre , set up to use a prism shaped double refracting crystal to determine the refractive indices of the qu , set up to measure birefringence of mica , set up to determine the cofficient of viscosity using capilary flow method , sextant , set up to measure of planck s constant using black body radiation and photo-detector , set up to find the coefficient of thermal conductivity of copper (cu) by angstrom method , set up to calibrate a thermocouple to measure temperature in a specified range by direct method and/ , set up to study the variation of thermo e. m. f. of thermocouple with difference of temperature of its , setup to determine the temperature coefficient of resistance using platinum resistance thermometer ( , setup to determine the temperature coefficient of resistance by platinum resistance thermometer (prt , set up to determine coefficient of themal conductivity of a bad conductor by lee and charlton's disc , set up to study the pe hysteresis loop of a ferroelectric crystal probes arrangement , set up to measure the dielectric constant of a dielectric materials with frequency , set up for the measurement of field strength b and its variation in a solenoid (determine db/dx) , set up to study magnetic field variation along the axis of a circular coil and in a helmholtz coil

CTN :45468789

17 Jun, 2026 NA

Almora - Uttarakhand

Tender For supply of unbranded glass fibre reinforced polyester tube , unbranded hit box , digital signal processing board , akew directional outdoor rf anteena , unbranded metal oxide surge arrestors , unbranded 4 channels audio digital signal processor , unbranded base mobile very high frequency marine transceiver , unbranded 100 megahertz non windows digital storage oscilloscope , unbranded rf signal generator 9khz to 1 ghz , unbranded lcd dielectric constant it for solids , unbranded electrostatic detection apparatus esda , rhode schwarz 20h 13 ghz real time

Central Government/Public Sector

CTN :45469419

16 Jun, 2026 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of smoke detector bhh 300 fds , fds keypad ud/567 ud576 , smoke detector bhh 320 fds , synchrometer, 415v 3 phase 50hz/msb , dual frequency meter 415v 45-55hz msb

CTN :45430786

18 Jun, 2026 NA

Ariyalur - Tamil Nadu

Tender For supply of electronics andcommunication engineering lab materials - electronics and communication engineering lab materials, dso (digital storage oscilloscope)bandwidth: 50 - 100 mhz.sampling rate: 1gs/s.channels: 2 (minimum)power supply: 100v 240v ac, 50-60 hzautomatic measurement: vpp, vavg,rms, frequency, period, vmax, vmin, rise time, fall time, + width, - width, +duty, - duty etc.,horizontal scale: 5 ns/div 100 ns/div or equivalentvertical resolution: 8 bits (2 channels simultaneously)vertical sensitivity: 1 mv/div 10 v/div (at input)waveform math: +, -, x , , invert, fft etc.,waveform storage: 16 waveforms or equivalentcommunication interface: usb host, usb interface.7-inch color display or equivalentbasic trigger functions, digital ic trainer kit with breadboard5v dc, 1a regulated power supply 12v dc / 15v, 200 ma regulated power supplysolderless breadboard to accommodate 8 16-pin icszif (zero insertion force) ic socketssupports ttl and cmos icslogic io leds for output monitoring8 buffered led outputs8 debounced switch inputsttl clock: 1 mhzvariable clock generator: 0.5 hz to 50 hzsingle pulse output: 100 ms (buffered, positive and negative outputs)one seven-segment display with 4 bcd inputsbuilt-in logic probesbuilt-in logic switchesexperiments on basic logic gates, flip-flops, counters, and multiplexers, eliminator transformer (stepdown)input - 220v - 240v ac, 50 hz, output-2v to 12v dc, 0-2 a ripple: 5mv, decade resistance boxrange: 1 to 10 m , steps: 1-10-100-1k-10k, accuracy 1%, suitable for filter and oscillator experiments, decade inductance boxrange: 1 h to 10 h, rotary switch selection, low loss inductors, accuracy 1%, , suitable for filter and oscillator experiments, 8051 micro controller kitoperating voltage: +5v dc4 kb flash (at89c51) / 8 kb flash (at89s52)ram: 128 bytes internal ram16 2 alphanumeric lcdpush buttons / tactile switchesdip switches for digital inputinbuilt adc interface : ldr,potinbuilt dac interfaceinbuilt stepper motor driver with stepper motorinbuilt dc motor driver with dc motor1x4 led array, 1 x4 keypad, 1x relay1x buzzer, 16x2 lcd display, 1x pwm driver1x hardware interrupt key, inbuilt rtcinbuilt eeprom, inbuilt uart module4x7 segment display, both assembly and c language programmable, pc interfaceable., single phase induction motorsingle phase induction motor, 230v ac, 50hz supply.power rating 1 hp (0.75 kw).speed 1440 rpm.capacitor start/run type suitable for lab useloading setup portable ammeter and digital tactometer contact type, auto transformerinput - single-phase, 230v/240v, 50 hz, 4a, ac output - 0 to 270vac, class "h" or class f insulation., temperature measurement kitsensors: rtd (pt-100), thermocouple (fe-k/j-type), and/or thermistor (ntc).display: 3 digit led/lcd digital display (typically 200mv fsd).temperature source: portable water kettle or heater block.signal conditioning: on-board circuitry for amplification, linearization, and cold junction compensation. test points: multiple 2mm/4mm banana sockets for monitoring input/output signals.power supply: 230v ac, 50hz, single-phase.accessories: includes a glass thermometer, ntc thermistor probe 10k, k-type thermocouple probe, patch cords, and instruction manual., ask modulation and demodulation kitmessage signal 1 : 8 bit variable data, amplitude 5vmessage signal 2 : debounce data, amplitude low (0) & high (5v)message signal 3 :fixed data 25k, 12.5k, 6.25k, 3.12k, amplitude 5vcarrier signal : sine wave frequency 200 khz, amplitude 5vmodulator type : switching icdemodulator : envelope detector & lpfcomparator : lm 311 basedsupply voltage (board) : +12v, +5v / dcsupply current : 100 ma (minimum)input voltage : 230 v/ 50 hz acinterface connectors : 2mm banana socket, dth trainer kitpower supply 200v to 240v ac, 50hz,dish antenna 1.5 aluminum steerable, lnb low noise block down converterinput frequency ku band.output frequency 950 to 1450 mhz.conversion gain 65 db.noise temp 35 degree k max.set top box receiver in traine

Central Government And Public Sector

CTN :45419379

24 Jun, 2026 NA

Multi City - Multi State

Tender For supply of electronic thermostat w,wire lm353m compatible to machine model- hm270 and hm490, make- ipso , seal assembly grommet for temperature sensor compatible to machine model- hm270, hm490 and hf234, make- ipso , speed detector xs4p12pa340 compatible to machine model- hm270, hm490 and hf234, make- ipso , main print board ps40 230v compatible to machine model- hm270 and hm490, make- ipso , keyboard ps40 220v compatible to machine model- hm270 and hm490, make- ipso , water level switch pressure-1 compatible to machine model- hm270, hm490 and hf234, make- ipso , kit drain valve w,bracket mdb 300 no compatible to machine model- hm270, hm490 and hf234, make- ipso , tilt switch compatible to machine model- hm270 and hm490, make- ipso , water inlet valve compatible to machine model- hm270 and hm490, make- ipso , electrical door lock pkg ele-div-0077 compatible to machine model- hm270 and hm490, make- ipso , computer board micro 20,frequency 230v compatible to machine model- hf234, make- ipso , eprom 27c256 pkg compatible to machine model- hf234, make- ipso , glass fuse 5x20mm f0, 5a,250v compatible to machine model- hf234, make- ipso , emergency button xb4-bs542 red with lock compatible to machine model- hf234, make- ipso , contact for emergency stop compatible to machine model- hf234, make- ipso , thermostat cygnus detector lm35 hf,ww304 compatible to machine model- hf234, make- ipso , tilt switch obl compatible to machine model- hf234, make- ipso , two way inlet valve muller30 plus 50l us-thd 220v compatible to machine model- hf234, make- ipso , solenoid inlet valve muller 220v compatible to machine model- hf234, make- ipso , two way inlet valve muller met 30 plus 50l 220v compatible to machine model- hf234, make- ipso , diaphragm for muller valve 30 plus 50 compatible to machine model- hf234, make- ipso , rotation sensor compatible to machine model- dr55, make- ipso , thermistor compatible to machine model- dr55, make- ipso , cabinet high limit thermostat compatible to machine model- dr55, make- ipso , thermostat lim 340f violet compatible to machine model- dr55, make- ipso , thermostat lim 350f blue compatible to machine model- dr55, make- ipso , air flow switch actuator compatible to machine model- dr55, make- ipso , contactor block for ess compatible to machine model- dr55, make- ipso , door switch snap spst no cherry compatible to machine model- dr55, make- ipso , lint door switch compatible to machine model- dr55, make- ipso , electronic control dx4 compatible to machine model- dr55, make- ipso , temperature sensor for electronic control dx4 compatible to machine model- dr55, make- ipso , drain pipe qui -nca - 0380 for ipso hm490 washing machine , relay board for chemical additon svs

CTN :45404144

09 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for electronics and communication engineering department - supply of equipment for electronics and cmmunication engineering department, 8051 micro controller kit :specification : operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., temperaturemeasurementkitspecification : sensors:rtd (pt-100), thermocouple (fe-k/j-type), and/orthermistor (ntc). display: 3 digit led/lcd digital display(typically 200 mv fsd). temperature source: portable water kettle orheater block. signal conditioning: on-board circuitry foramplification, linearization, and cold junctioncompensation. test points: multiple 2 mm / 4 mm banana socketsfor monitoring input/output signals. power supply: 230 v ac, 50 hz, single-phase. accessories: glass thermometer, 10 k ntcthermistor probe, k-type thermocouple probe,patch cords and user manual., ask modulationanddemodulation kit:specification : message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz,amplitude 5 v. carrier signal: sine wave, frequency 200 khz,amplitude 5 v. modulator type: switching modulator using analogswitch / transistor switching ic. demodulator: envelope detector and lpf. comparator: lm311 based. supply voltage (board): +12 v, +5 v dc. supply current: 100 ma minimum. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., dth trainer kit:specification :power supply: 200 v to 240 v ac, 50 hz.dish antenna: 1.5 ft aluminium steerable dish antenna.lnb (low noise block down converter): input frequency: ku-band. output frequency: 950 mhz to 1450 mhz. conversion gain: 65 db. noise temperature: 35 k (max).set-top box receiver in trainer form: if frequency: 70 mhz. video bandwidth: 50 hz to 5 mhz. video output level: 1 vpp at 75 load. video polarity: normal/inverted, switch selectable. audio subcarrier frequency:tunable from 5.0 mhz to 8.0 mhz. remote control provided. hdmi cable: 10 m.controls: channel selection. volume control.fault simulation: five built-in simulated faults for troubleshootingexperiments. if signal disconnected. video output fault. audio mute fault. tuner misalignment. rf output interruption.pcb size: 15" 12" with multicolour section-wise blockdiagram.standard accessories: 1.5 ft dish antenna. lnb. trainer pcb. dish connecting wire. audio-video cable. user manual. acrylic cover. hardware materials for assembly of dish antenna.additional features: dth subscription connection withdoordarshanfree channels. free-to-air channel demonstration., fpga trainer kit:specification : must use industry-standard mid-range fpgadevice usb-jtag programmable, compatible withvivado ise (webpack). power supply: 5 v dc through usb or externaladapter. on-board peripherals: leds, switches, pushbuttons, 7-segment display,clock source, gpio /pmod expansion ports, uart, vga / hdmi, usbuartbridge, usb cable. user manual.

State Government

CTN :44959873

11 Jun, 2026 NA

Jummu - Jammu And Kashmir

Tender For corrigendum : supply of electrostatic detection apparatus (esda) (q3)

CTN :45363423

15 Jun, 2026 NA

Krishnagiri - Tamil Nadu

Tender For supply of metrology lab items - "ultrasonic flaw detector specification ● test range: 2.5 mm to 10 meter in steel● velocity range: 1000–15000 m/s● gain: minimum 100 db with calibrated steps● frequency range: 0.5–15 mhz● display: a-scan display (lcd)● modes: pulse echo and transmit/receive● linearity:● vertical: ±3%● horizontal: ±0.5%● probes: minimum 2 (straight and angle)● connectors: standard (size 00 or equivalent)● power: rechargeable battery+ ac supply ", "optical digital microscope specification magnification: 40x to 400x● digital camera: minimum 5 mp resolution● display: pc/monitor via usb/hdmi or built-in display● illumination: adjustable led illumination● focus: coarse and fine focusing mechanism● optics: coated lenses with wide field view● stage: mechanical stage with slide holder● software: image capture, measurement, and analysis software included● connectivity: usb / hdmi/ethernet", "portable surface roughness testerspecification:● parameters: ra, rz, rq, rt● measuring range:ra: 0.005–16 µmrz: 0.02–200 µm● resolution: ≤ 0.01 µm● accuracy: ±5% or better● stylus: diamond tip (≈5 µm radius)● cut-off lengths: 0.25 mm, 0.8 mm, 2.5 mm● display: digital lcd● output: usb interface for pc connection no 50000 ● standards: iso 4287 / din /ansi compliant● power: rechargeable battery", "digital height gage with driving wheel (300)specification:● measuring range: 0–300 mm● resolution: 0.01 mm● accuracy: ±0.03 mm● construction: hardenedstainless steel column● base: ground and lappedbase suitable for surface plate● measuring tip: carbidetipped scriber● movement: smooth sliderwith fine adjustment wheel● display: digital lcd● power: battery operated"

CTN :45343672

11 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of electronics and communication engineering practices (equipment) - equipments for electronics and communication engineering practices:, 8051 micro controller kit operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., embedded trainer kit (using lpc2148) cpu -lpc2148, core -16/32 bit arm7tdmi-s speed -max 60 mhz, flash -512kb, ram (on-chip) 40kb, 46 general purpose i/opins, usb2.0 one 10bit a/d converterwith 14 analog inputs, one 10bit d/a converter, six pwm &watchdog two uarts (16c550), two i2c (400kb/s), two spi eight bit digital output, eight bit digital input,16x2 characters lcd and 4x4 matrixkeypad one potentiometer for giving analog input, relay & buzzer interface i2c devices: rtc, eeprom and seven segment display, on board stepper motordriver lm35 temperature sensor, one rs 232 lines are terminated at 9 pin d type connector and usb interface board has inbuilt power supply and mounted in sturdy cabinet accessories usb cable with utility software to download programs from pc to target board power cord, user manual, ask modulation and demodulation kit message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz, amplitude 5 v. carrier signal: sine wave, frequency 200 khz, amplitude 5 v. modulator type: switching modulator using analog switch / transistor switching ic. demodulator: envelope detector and lpf. comparator: lm311 based. supply voltage (board): +12 v, +5 v dc. supply current: 100 ma minimum. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., dth trainer kitpower supply: 200 v to 240 v ac, 50 hz.dish antenna: 1.5 ft aluminium steerable dish antenna.lnb (low noise block down converter):input frequency: ku-band. output frequency: 950 mhz to 1450 mhz. conversion gain: 65 db. noise temperature: 35 k (max).set-top box receiver in trainer form: if frequency: 70 mhz. video bandwidth: 50 hz to 5 mhz. video output level: 1 vpp at 75 load. video polarity: normal/inverted, switch selectable. audio subcarrier frequency: tunable from 5.0 mhz to 8.0 mhz. remote control provided. hdmi cable: 10 m.controls: channel selection. volume control.fault simulation: five built-in simulated faults for troubleshooting experiments. if signal disconnected. video output fault. audio mute fault. tuner misalignment. rf output interruption.pcb size: 15" 12" with multicolour section-wise block diagram.standard accessories: 1.5 ft dish antenna. lnb. trainer pcb. dish connecting wire. audio-video cable. user manual. acrylic cover. hardware materials for assembly of dish antenna.additional features: dth subscription connection with doordarshanfree channels. free-to-air channel demonstration.

CTN :45346428

15 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of renewable energy practical equipments - equipments for renewable energy practices:, rc phase shift oscillator oscillator type: rc phase shift oscillator using transistor / op-amp configuration. input supply: 230 v / 50 hz ac with regulated internal dc supply. output frequency range: 100 hz 10 khz adjustable. output: sinusoidal waveform with adjustable amplitude up to 10 vpp. rc network: three-stage rc phase shift network with frequency control arrangement. cro test points: dedicated cro terminals at amplifier output, each rc stage, and final output for waveform and phase-shift observation. protection: over-voltage and short-circuit protection provided. indicators and controls: power on led indication with frequency and gain adjustment controls. accessories: patch cords, circuit diagram, strain guage characteristics kitac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords, load cell characteristics kit input supply: 230 v / 50 hz ac with regulated internal dc supply. sensor: strain gauge load cell with suitable mounting arrangement. load range: 0 10 kg. display: digital display for load/output indication. cro / test points: test points provided for observing bridge output, amplifier output, and signal conditioning stages. controls: zero adjustment and calibration controls provided. protection: overload and short-circuit protection provided. accessories: loading arrangement, connecting leads., measurement of tank level using rotometer input supply: 230 v / 50 hz ac with regulated internal dc supply. tank arrangement: transparent tank with 30 liters capacity with suitable supporting stand. rotameter range: 0 4000 l/hr calibrated rotameter. flow system: pump, control valves, and piping arrangement provided for continuous flow operation. measurement facility: provision for flow-based tank level measurement and observation. display / observation: calibrated level indication with flow monitoring arrangement. test points: output terminals provided for monitoring sensor/output signals. accessories: connecting tubes., measurement of tank level using displacer type level transmitter input supply: 230 v / 50 hz ac with regulated internal dc supply unit. measurement principle: buoyancy (archimedes principle) using displacer element. tank arrangement: transparent experimental tank with 30 liters capacity and suitable mounting stand. level range: suitable laboratory-scale level measurement (0 100% tank height). sensor system: displacer type level transmitter with continuous level output signal. display unit: digital indicator for level display in percentage / engineering units. output signals: standard analog output (4 20) ma / (0 10) v provided for monitoring. test points: provided for transmitter output, signal conditioning, and display unit verification. controls: zero and span calibration adjustment provided for setting level reference. protection: over-voltage and short-circuit protection for electronic modules. accessories: connecting cables, piping arrangement, loading medium (water), measurement of temperature using pt100 input supply: 230 v / 50 hz ac with regulated internal dc power supply unit. sensor: pt100 resistance temperature detector (rtd) probe with stainless steel sheath. measurement principle: resistance variation of platinum element with temperature. temperature range: 0 c to 150 c (or suitable laboratory range). display unit: digital temperature indicator with direct c display. accuracy: high accuracy with linearized rtd signal conditioning circuit. sign

Electrostatic Detection Apparatus Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government And Public Sector

State Government