Latest electrostatic dust mark lifting kit Tenders | Government electrostatic dust mark lifting kit Tenders

State Government

CTN :45430547

29 Jun, 2026 36.73 Lacs

Amritsar - Punjab

Tender For corrigendum : drilling, installation of new pvc t/well pumping set house connection for existing and new pipe line, prov laying jointing testing pvc pipe for distribution system, replacement of control panel, repair of pump chamber ohsr all other works complete - balance work for 09nos. schemes 18 nos. villages providing improved access to water through household connection in various existing water supply schemes block ajnala distt. amritsar.(under jal jeevan mission/nwqsm/nabard xxvi) (section-iv). 1.tera rajputtan 2. ballarwal 3. fatehwal 4.riyar 5. sarai 6. talwandi rai dadu 7. vanjanwala 8. nangal wanjanwala 9. dabur basti block ajnala distt amritsar. (under surface water project kandowali) drilling installation and commissioning of pvc t/well, providing house connection for existing pipe line & new pipe line prov. & laying jointing, testing pvc pipe, specials for distribution system, sluice valve, chamber, chlorinator, replacement of control panel, repair of pump chamber, repair of ohsr & development of water works etc. & all other works contigent there to complete in all respect.

State Government

CTN :45430549

29 Jun, 2026 45.02 Lacs

Amritsar - Punjab

Tender For corrigendum : prov. house connection for existing and new pipe line prov. laying jointing testing pvc pipe specials sluice valve chamber chlorinator replacement of control panel repair of pump chamber ohsr and all other works complete in all respect - providing improved access to water through household connection in various existing water supply schemes block majitha distt. amritsar.(part of surface water project gaunsal afgana ) (under jal jeevan mission/nwqsm/nabard xxvi) (section-15 part-ii). 1. chachowali 2. thariewala 3. waryam nangal 4. bhangali khurd & gujjerpura 5. bhangali kalan block majitha distt. amritsar). providing house connection for existing pipe line & new pipe line prov. & laying jointing, testing pvc pipe, specials for distribution system, sluice valve, chamber, chlorinator, replacement of control panel, repair of pump chamber, repair of ohsr & development of water works etc. & all other works contigent there to complete in all respect.

State Government

CTN :45363922

16 Jun, 2026 4.47 Lacs

Malerkotla - Punjab

Tender For corrigendum : repair of pump chamber ohsr water works and pipe line leakages new automated water controller control panel water connections providing and laying pipe line and sluice valve etc

State Government

CTN :45314529

16 Jun, 2026 9.61 Lacs

Malerkotla - Punjab

Tender For corrigendum : repair of pump chamber ohsr water works and pipe line leakages new machinery control panel automated water controller water connections providing and laying pipe line and sluice valve etc

State Government

CTN :45314542

16 Jun, 2026 7.15 Lacs

Malerkotla - Punjab

Tender For corrigendum : repair of pump chamber ohsr water works and pipe line leakages new automated water controller chlorinator control panel water connections providing and laying pipe line and sluice valve etc

CTN :45517088

02 Jul, 2026 NA

Panchkula - Haryana

Tender For electrically heated thermal insulation furnace of inner chamber size of 1500mm x 1000mm x 1000mm , electrically heated thermal insulation furnace of inner chamber size of 1600mm x 1600mm x 1600mm , electrically heated thermal insulation furnace of inner chamber size of 200mm x 200mm x 200mm , control panel with plc automation

CTN :45519531

13 Jul, 2026 40.00 Lacs

Guna - Madhya Pradesh

Tender For supply of water supply pipe line hand pump bore well repair anf repairing material under np raghogarh - water supply materiasl, cid joint 80mm dia class 15, cid joint 100mm dia class 15, cid joint 80mm dia class 10, cid joint 100mm dia class 10, ci sluse valve 50mm dia heavy duty, ci sluse valve 80mm dia heavy duty, ci non return valve 50mm dia heavy duty, rubber packing sheet, nut bolt all size, ci flang 50mm dia heavy duty, ci flang 80mm dia heavy duty, threst plate, acp pipe 150mm dia class15, hand pump rod socket 12 mm, hdpe pipe 75mm dia pe100/10kg, starter oil p, gi pipe 32mm dia with socket class b heavy duty 5 kg/rmt, gi pipe 50mm dia with socket class b heavy duty 8 kg/rmt, gi socket 50mm dia seamless, gi socket 50mm dia, gi bend 50mm dia, gi clamp 50mm dia 150mm length, main switch 63 amp., main switch 100 amp., gi nipple 50mm dia 100 mm length, gi redeuser 50mm x 75mm, copper cable 3 core 16 sqmm (falcon or finolex make), bore cap 6 inch, bore cap 8 inch, gi end cap 2 inch, gi end cap 3 inch, submerciable moter pump single phase 3 hp 160m., gi elbow 2 inch, gi elbow 3 inch, gi/ci t 2 inch, gi/ci t 3 inch, cpbc pipe heavy duty 16mm dia, handle hand asembly compleate, padestanal heavy duty, water chamber, ci cylender heavy duty (deep well), upper valve assembaly compleate, check valve assembaly compleate, ms rod 3m - 12mm, hexagonal nut bolt, chain nut bolt, chain with cupler, handle excell, bearing 6204 heavy duty\, naitril washer, leather washer, rubber sealing ring, uppor valve guide seat, submercible motor pump 15 hp motor 12 stage pump (falcon /texmo/cri or equelent make), starter 1 hp to3 hp switch penal, starter 10 to 15 hp delta, control penel board oil starter 20 to 35 hp (two button), control penel board oil starter 20 to 35 hp (trhee button), rubber ring 80 mm, rubber ring 100 mm, auto switch 7 wire semi, 9 wire wth, pvc cable 3x4 sqmt standard make (falcon /finolex or equlent make), pvc cable 3x6 sqmt standard make (falcon /finolex or equlent make), copper cable three core 16sqmt standard make (falcon/finolex or equlent make), nariyal rassa, pvc rassa, teflon tap, clamp 1/2 ", clamp 1 ", clamp 1 -1/4", clamp 2", clamp 2-1/2", clamp 3", black roll pipe 3/4 ", black roll pipe 1", black roll pipe 1-1/4", tala 50mm, tala 60 mm, tala 75 mm, penchkas, plaash, pipe rinch 12 ", 18" & 24", 7/16 coper wire, 1.5 coper wire, 1" over flow footwall, 63 a. kit kat, 100 a. kit kat, 63a. m.c. b. for pol, 100a. m.c. b. for pol, 125a. m.c. b. for pol, 1 hp open well moter ci body, over head tank 1000l.

CTN :45384476

17 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For corrigendum : purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45492358

19 Jun, 2026 NA

Tiruvallur - Tamil Nadu

Tender For tender for supply of mt spares - lv7/stln/4720-016005 hose assy non metallic/tyre inflator , lv7/stln/2530-72-0000691 chamber air pressure brk , lv7/stln/2590-024062 cable assy control , lv7/stln/2520-72-0468319 s a driven disc , lv7/stln/f-8068100 assy rear view mirror lh/rh , lv7/stln/4930-002612 gun fluid direct delivery , lv7/stln/2940-72-0467508 element oil filter , lv7/stln/f-3921800 slave cyl clutch , lv7/stln/b-9100104 vehicle speed sensor gb , lv7/stln/8105-001038(x-4700600) bag tools and spare parts(tool kit bag) , lv7/stln/p-4800808 wire rope with both end slings , lv7/stln/2590-72-0475394 bowl oil filter element

Central Government/Public Sector

CTN :45345771

15 Jun, 2026 NA

Raipur - Chhattisgarh

Tender For corrigendum : procurement of spares for ms sepl make analysers for ntpc vstps - plc+hmi (combo),sepl,dgrplc+hmi, 3-wayballv/v,grb-sa-vlv,steam equipments, degas chamber,mqp875sepl+,sepl, heater control relay,se-hetr-ssr,sepl, dualchtsmtr,sepl,conductivity tran, sample heater system,sepl, sensor,degas conductivity analyz,sepl, samp iso vv,mkt-swaslt,sepl, temp sensor,conductivity analyz,sepl, flow sensor,degas cat conductivity,sepl, rotameter,gls tube indctr,0-29lph,st-5, vv: samp isol vlv-ht,ss316,280bar,3/8in, vv: sample iso lt,ss316,7bar,1/4in, sampl isoln valve,sepl,analyzer, cation column degas system,sepl,se-cc-14

Electrostatic Dust Mark Lifting Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

Central Government/Public Sector