Latest elint intercept receiver Tenders | Government elint intercept receiver Tenders

State Government

CTN :43245118

17 Jan, 2026 51.07 Crore

Gandhinagar - Gujarat

Tender For thangadh ugd-ii under sjmmsvy : working survey, soil investigation, design and construction, testing & commissioning, providing, supplying, lowering, laying and jointing di / rcc pipeline network, providing house connection, augmentation of pumping machinery of sub pumping station with operation and maintenance with all allied works for 02-[two] years including 03-[three] years defect liability period for thangadh nagarpalika under ground drainage project, taluka & district: -surendaranagar, gujarat

Central Government/Public Sector

CTN :43236290

19 Jan, 2026 NA

Multi City - Multi State

Tender For construction of under ground bunker at 220 by 66 kv drass sub-station of powergrid

CTN :43244375

31 Dec, 2025 25.43 Lacs

Mehsana - Gujarat

Tender For special repair work of new underground pipeline network from sump to block 30 to 37 and near sp office at phq mehsana,pared ground office & toilet ,drainage line of sp kacheri,auditorium building toilet block and special repaire work of repeater station at taranga, dist.mehsana. (incl.electrification work) (sr priority 2025-26) (2nd attempt) (sbd)

CTN :43165482

22 Dec, 2025 15.17 Lacs

Panchkula - Haryana

Tender For providing and fixing of open gym equipment in various parks of sector 26 , ward no 18, panchkula. - works details, air walker: providing, designing and fixing of air-walker of size 100 550 1480mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. base plate cover shall be made up of virgin lldpe plastic by rotational moulding with minimum 4.00mm thickness u v resistant and colour as approved by engineer-in charge. high quality grip rubber should be used on handles. foothold shall be made of nylon alloy with rounded edge to prevent impact and injury. maintenance free bearing should be used in equipment manufactured by reputed company duly sealed and self lubricated to be approved by engineer in charge. equipment to be fitted with inbuilt limiters. the equipment should be fixed on ground with concrete of minimum strength m25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc., horse rider station: providing, designing and fixing of horse rider station each of size 1000 x 600 1100 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micron thick. all welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zine primer paint to be applied at all welding points prior to finishing. padals shall be made up nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and u v resistant environmental friendly.bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by engineer-in-charge. equipment to be fitted within built limiters to prevent unwanted movements. all open ends of pipe to be coloured by gi/lldpe caps for user safety. the equipment lope fixed on ground with concrete of minimum strength m25 and j shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc., leg press: providing, designing and fixing of stair stepper in a combinationof pair and a single step of size 2000 x 550 x 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micron thick.all welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars are to be provided with high quality grip rubber at top end. padals shall be made up of nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and u v resistant environmental friendly.bearing used shall be maintenance free, duly oiled sealed and

CTN :43246018

12 Jan, 2026 NA

Bhagalpur - Bihar

Tender For s&t work in connection with (a) replacement ground construction of full fledge newly rpf 80 bedded barrack at bhagalpur station.(b) the construction of 30 beded rpf barrack at malda, (c) improvement and renovation work in sahibganj institute in connection with heritage structures at sahibganj station. (d) opening of a halt station at badhet between kurmahat (kumt) and hansdiha (hsda) railway station, (e) opening of a halt station at bhatondha between godda (goda) and poreyahat (puht) railway stations.

corporations/Associations/Others

CTN :43233886

20 Jan, 2026 1.31 Crore

Ankleshwar - Gujarat

Tender For providing, laying, jointing 450 mm dia hdpe over ground pipe line from a pumping station to wockhardt pocket and construction of under ground sump at na gidc ankleshwar

Central Government/Public Sector

CTN :43217931

26 Jan, 2026 19.90 Crore

Cuddapah - Andhra Pradesh

Tender For tender for supply of deisgn engineering and supply of electrical instrumentation and civil works : : - design and engineering of imcc panel 2 nos and vfds , design and engineering of apfc and hvac , design and engineering of apfc and field instruments , design and engineering of cables and termination , design and engineering of earthing of imcc , field equipments and soil testing , design and engineering of civil buildings and structure foundations , design and engineering of imcc building with earthing system , design and engineering of structural works for cable laying for both incoming and outgoing cables , design and engineering of lighting system of imcc building , equipment locations at ccr ground floor and along the structural path for cable route , supply of imcc panels , vfd panels , supply of apfc panels , hvac system , supply of mldb lighting distribution boards , lighting material including db , light fittings , and all related accessories or wiring material etc , supply of field instruments and necessary piping materials as required , supply of plc , supply lt cables and other related accessories for electrical , termination material and other instrumentation cables as required , supply of cable trays for electrical and instrumentation , supply of all earthing material as per is 3043 for imcc and connection to earth pits for motors , panels etc , supply of fire detection and alarm system for building and cable alley area along with integration and display at fire station/existing control centre , erection , testing , commissioning , and handover of equipments of imcc panels and vfd panels , erection , testing , commissioning , and handover of equipments of apfc panels and hvac system , erection , testing , commissioning , and handover of equipments of lighting system as per above supply , erection , testing , commissioning of earthing system , erection , testing , commissioning of field instruments and necessary piping materials etc as required , erection , testing , commissioning and handover of plc , erection , laying , testing and commissioning of lt cables ( cable terminations wherever required along with necessary accessories is in the scope of the contractor) for electrical and instrumentation , erection , testing and commissioning of cable trays for electrical and instrumentation , erection , testing and commissioning of fire detection and alarm system for building and cable alley area along with integration and display at fire station/existing control centre , substructure excavation , foundation works (footings , columns up to plinth level) , dpc (damp proof course) , and backfilling. , superstructure columns , beams , slabs , brickwork/masonry for all floors above plinth level , and formwork up to ground floor , finishes plastering , flooring (tiles , marble) , painting , wall cladding , and other interior/exterior finishes , plumbing works , fixing of doors up to ground floor. , superstructure columns , beams , slabs , brickwork or masonry for all floors above plinth level , and formwork for subsequent floors as per approved design , finishes plastering , flooring (tiles , marble) , painting , wall cladding , and other interior/exterior finishes , plumbing works , fixing of doors for subsequent floors as per approved design , supply and erection of structural works for cable laying for both incoming and outgoing cables

corporations/Associations/Others

CTN :43232862

26 Dec, 2025 1.30 Crore

Morbi - Gujarat

Tender For bid documents for designing, providing, supplying, lowering, laying & jointing sewer collecting system including rising main network, pumping station along with all allied electro-mechanical works including operation & maintenance of 2 years for sewage network and allied works under sjmmsvy scheme for wankaner under ground drainage project, district : morbi (5th attempt)