Latest emergency alarm valve Tenders | Government emergency alarm valve Tenders

CTN :45592297

01 Jul, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For corrigendum : supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan

Central Government/Public Sector

CTN :45638416

29 Jun, 2026 NA

Jodhpur - Rajasthan

Tender For supply of kit for passenger emergency alarm valve to rdso drg. no. sk-97029 alt.-3, item no. 2 , 4 , 5 ,6 , 7 , 8 ,9 ,11 ,12 , 14 & 23.matl. & spec. confirm to str 02-abr-02 with amndt. no. 4 of sept. 2016. [ warranty period: 36 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45638478

30 Jun, 2026 NA

Ajmer - Rajasthan

Tender For supply of emergency brake valve knorr bremse part no. 194023/ki, drg. no. b 89712/ki or passengeremergency brake valve nb 12a to sona blw drg. no. 2 kb 3683/a or passenger emergency alarm valve drg. no. ftrtipl part no. ft0051128-100.confirming to rdso spec. rdso-2011-cg-04 rev-4 [ warranty period: 36 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ] ]

Central Government And Public Sector

CTN :45622675

03 Jul, 2026 NA

Dibrugarh - Assam

Tender For supply of passenger emergency alarm valve, as per drg.no. rdso no.sk.-97029, alt-3 or latest. specn: rdso spec. 02-abr-02, with 3 amnd up to amnd-3 of apr-2010 appendix - j [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45604902

29 Jun, 2026 NA

Ajmer - Rajasthan

Tender For supply of kit for passenger emergency alarm valve to rdso drg. no. sk-97029 alt.-3, item no. 2 , 4 , 5 ,6 , 7 , 8 ,9 ,11 ,12 , 14 & 23.matl. & spec. confirm to str 02-abr-02 with amndt. no. 4 of sept. 2016. [ warranty period: 36 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ] ]

CTN :45597887

29 Jun, 2026 178

Multi City - Karnataka

Tender For supply of water supply items to kirugavalu grama panchayat - ½" pvc pipe bend, ¾" pvc pipe bend, 1" pvc pipe bend, 1¼" pvc pipe bend, 1½" pvc pipe bend, 2" pvc pipe bend, 2½" pvc pipe bend, 3" pvc pipe bend, 4" pvc pipe bend, ½" pvc tee, ¾" pvc tee, 1" pvc tee, 1¼" pvc tee, 1½" pvc tee, 2" pvc tee, 2½" pvc tee, 3" pvc tee, 4" pvc tee, 2" service saddle (63x20mm), 2½" service saddle (75x20mm), ½" gi elbow & collar, ¾" gi elbow & collar, 1¼" gi collar, 1¼" gi bend, 2" gi bend, 2½" gi bend, 2" gi collar h/v, 2½" gi collar h/v, 2" gi non return valve, 2½" gi non return valve, ½" gi pipe nipple 1 feet, ¾" gi pipe nipple 1 feet, 2" gi pipe nipple 1mtr, ½" pvc pipe, ¾" pvc pipe, 1" pvc pipe, 1¼" pvc pipe, 1½" pvc pipe, 2" pvc pipe, 2½" pvc pipe, 3" pvc pipe, 4" pvc pipe, ½" pvc elbow, ¾" pvc elbow, 1" pvc elbow, 1¼" pvc elbow, 1½" pvc elbow, 2" pvc elbow, 2½" pvc elbow, 3" pvc elbow, 4" pvc elbow, ½" pvc pipe collar, ¾" pvc pipe collar, 1" pvc pipe collar, 1¼" pvc pipe collar, 1½" pvc pipe collar, 2" pvc pipe collar, 2½" pvc pipe collar, 3" pvc pipe collar, 4" pvc pipe collar, 2" pvc joint collar, 2½" pvc joint collar, 3" pvc joint collar, ½" pvc ball valve, ¾" pvc ball valve, 1" pvc ball valve, 1¼" pvc ball valve, 1½" pvc ball valve, 2" pvc ball valve, 2½" pvc ball valve, 3" pvc ball valve, 4" pvc ball valve, ¾" cpvc pipe, 1" cpvc pipe, ¾" cpvc elbow & collar, 1" cpvc elbow & collar, ¾" cpvc tee, fta, mta, 1" cpvc tee, fta, mta, cpvc gum 29ml, ¾" cpvc ball valve, 1" cpvc ball valve, ¾" cpvc union & tank nipple, 1" cpvc union & tank nipple, solvent cement, solvent cement, solvent cement, ½" pvc mta & fta & end cap, ¾" pvc mta & fta & end cap, 1" pvc mta & fta & end cap, ¼" pvc mta & fta & end cap, ½" pvc mta & fta & end cap, 2" pvc mta & fta & end cap, ½" pvc mta & fta & end cap, 3" pvc mta & fta & end cap, gargen pipe ¾", gargen pipe 1", 2hp v4 sm motor pump 20stage, 3hp v4 sm motor pump 30stage, ¼" hdpe pipe, ½" hdpe pipe, hdpe end connector, stick & paper, thrust bearing & bottom, impellers, rotor bush, do bush, stg bush, ¼" gi pipe, plunger rod 3 meter, gm upper valve, gm lower valve, borewell handle, borewell head, borewell water tank, borewell pedestal stand, ¼" gi collar long, mcb 4 pole, bolt nut 5/8", bolt nut 3/8", nrv lather, x nipple, m-12 boltnuts, bucket washer, cylinder, ½" gi tap, ¾" gi tap, hp motor pump with 10 stage, 7.5 hp motor pump with 12 stage, 10 stage pump, 12 stage pump, 7" cassing pipe, shalk thrid, mrf tape, pcv tape roll, 1.2 mm rewinding copper wire, 2" bore clamp, ½" bore clamp, 2" gi pipe, 4sqmm 3core copper cable flat type, dol electrical panel board, sada electrical panel board, relay ltlk, electrical contact kit, contactor unit, no volt coil, amps meter, volt meter, indicator, dol starter m, dol starter ltlk, 63amps fuse unit, 100amps fuse unit, 7.5hp preventor, 7.5hp-15hp preventor, relay unit-motor, 5" pvc pipe, 5" repair collar, 5" pvc elbow, 5" pvc pipe bend, 5" pvc tee, 5" mta, 5" fta, 5" pvc collar, 6" pvc pipe, 6" repair collar, 6" pvc elbow, 6" pvc pipe bend, 6" pvc tee, 6" plain end, 6" mta, 6" fta, 6" pvc collar, 6" threaded end cap, motor rewinding labour+ worshop turning fitting, charges, motor lifing erection and service fitting, hand pump lifting erection and service, starter board wiring electrical service and fitting, over tank gateawall gm rad leath tredded charge and service

Central Government/Public Sector

CTN :45593503

19 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - 98080106: cond. & u/s. signal items and ms/ci/gi item scrap consisting of point machine, ground connection, , point machine base, lock rod,contactor unit parts, other point machine parts, loco parts, gears, slide cover, cams, ms rotors, beaters, bars, ms rod/angle /channel/pipe cut piece, bm box, pipe fittings, screw couplings, coupling hook, signal three aspects, signal two aspects, cast iron components, pressure tank, augers, dip lorry, ms trolly, tension rod, plate, large pipe,signal post, fastners, pick axe, beaters, crow bars, lever, train coach door broken parts, ms stand, weighing set, traction motor case, compressor case, compressor valve, ms tank, nut, bolt, tool box, ci linked pots, chain, damper, l c gate parts and tap, valve, gear case, flat rod, ms trolley, rottery key, grill, pulley, air filter,cut of angle cock,knuckle pin,wearing plate,cp bottom,ci part, fencing, hood, boiler tube, winch wheel, lc gate parts, steel rope, ladder, battery boxes, frames, ms boxes, ring, ci foundation ct boxes, loco liner, buffer, buffer case, buffer plunger,icf buffer complete set, piston, piston cylinder,weigh machine, connecting rod, signal posts with or without base, bearing case, tension rod, cam shaft,ms cut pieces,pipes, storng part with diabar ms attachment,pure iron flats,pump case, pta parts,shock absorber,e type lock,d bracket,axle box housing,end shield,cast iron component, trolly parts, hyd scissors table,air suspension system, pipe,ladder, pantograph parts, sack barrow,winch for lb gate,l angle,gate boom,rail wheel barrow,nozzle pricker, ms hood tap and such other similar signal,cut pieces of mast, loco and c&w items with or without non ferrous and other attachments as is where is condition. note: (1) if any non- ferrous items found in loose in the location to be handed over to custodian at the time of delivery, (2) crane/jcb loading permitted (3) cutting permitted to loadable size at the time of delivery (4) electronic weighbridge capacity 30 mts only. hence purchaser should bring suitable vehicle so that the loaded weight should not exceed 28 mts at the time of delivery. locotion: w-6& 7 of scrap yard/ssd/ptj.

Central Government/Public Sector

CTN :45546592

19 Jun, 2026 NA

Bengaluru - Karnataka

Tender For supply of air brake passenger emergency alarm valve to rdso sk 97029 alt-3 to rdso specn 02-abr-02 amendment 4 of sept-2016 with appendix-j. [ warranty period: 30 months after the date of delivery ] ]

CTN :45547287

24 Aug, 2026 NA

Howrah - West Bengal

Tender For supply of passenger emergency alarm valve (kb) for lhb. drawing no.: kb part no.- i94023/ki matl. & spec.: as per part no./drawing. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45453677

19 Jun, 2026 NA

Nagpur - Maharashtra

Tender For supply of indigenous, empty, high pressure, seamless, steel, flat type, concave bottom, gas cylinder as per is:7285 part ii, suitable for filling oxygen gas having water capacity 47.00 ltrs. fitted with normal valve, working pressure 150 bar, test pressure 225 bar, painted as per colour code as specified under gas cylinder rule 2004. [ warranty period: 30 months after the date of delivery ] ]

Emergency Alarm Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector