Web Analytics Made Easy - StatCounter

Emergency Exit Door Tenders

Get complete information related to latest Emergency Exit Door Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Emergency Exit Door Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Emergency Exit Door Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :42774003 Due date: 05 Dec, 202505 Dec, 2025 NA
Tender For bid to ras procurement of rodent thermostable container - ms pipe 40 into 40 into 3 mm , ms pipe 76 into 80 into 3 mm , puf panel 8 feet into 3 feet , puf panel 6 feet into 3 feet for roof , steel door with frame , nut and bolts , checker palete 3 mm size 8 into 4 , labour charges for fixing and installation

Central Government And Public Sector

CTN :43026986 Due date: 24 Dec, 202524 Dec, 2025 14.00 Lacs
Tender For supply of tarpaulin curtain for cave painting protection size , drinking water cooler 150 liter capacity , phenyl , disinfectant liquid cleaner , harpic 500 ml , toilet brush , dust bin big size , dust bin small size , footrest rubber , plastic bucket small , plastic bucket big , plastic mug , air freshener , naphthalene ball , liquid soap , wiper brushes , toilet paper rolls , led tube light 28 watt , hand gloves , hard brooms , soft brooms , mop set , wet mop set automatic twist , cable tie one hundred fifty millimetre and two hundred millimetre , insulation tape roll box , screw box eight by thirty five , five millimeter fiber grip pocket , concrete hammer drill bit of size five and six millimetre each , concrete hammer drill bit of size eight and ten millimetre each , submersible one by four inch pvc water pipe tap of size half inch , stainless steel extension nipple three inch , stainless steel water glass stand , pvc water glass , s. s. chain , teflon tape , m seal pkt one hundred grams , pvc elbow one by four inch , pvc pipe one by four inch , cpvc solution two hundred millilitre , adhesive solution one kilogram , spray colour black , one inch by one inch square pipe , hole pass , pvc pipe two inch , pvc pipe four inch , pvc t joint four inch , pvc elbow four inch , pvc elbow two inch , self threaded gi screw half inch , self threaded gi , oil paint ad grey color , stainless steel jali three by five , fastener and screw , different plants with pot , different plants without pot , hard brooms , soft brooms , dry battery cell box , duster cloth zosen , footrest coir , footrest rubber , plastic dustbin big size , coir brush , wire brush , nylon brush smooth , nylon rope half inch in kilogram , jute rope one and half inch in kilogram , bleaching powder twenty five kilogram bag , napkin , towels , water tap , everyday torch three cell , everyday torch four cell , everyday torch three cell small , first aid box , hand gloves cotton , safety belt with rope , pvc helmet , folding stretcher , steel glass for drinking water , aluminium ladder self supported flat step size ten feet , aluminium wall supported extension ladder forty to forty three feet ten gauge , water pump set seven point five horsepower three phase with starter and necessary accessories , honey bee safety kit , fire extinguisher , half horsepower single phase water accessories set with necessary accessories , one horsepower single phase water pump set with necessary accessories , loudspeaker with mic system , hand trimming cutter , honey bee protect cap , door frame metal detector hi-pe multi zone , hand held metal detector , currency counting machine

CTN :43012563 Due date: 16 Dec, 202516 Dec, 2025 38.94 Lacs
Tender For supply of sports equipements for dyes departmnent of koppal - outdoor gym horse riding michine, shotput 6kgturned iron made of standard athletics, shot put 5kg turned iron made of standard athletics, shot put 4kg coste iron made of standard athletics, shotput 3.63kg turned iron made of standard athletics, shotput 3kg, hammer throw(7.25kg) turned iron made of standard athletics, hammer throw (6kg) turned iron made of standard athletics, skipping rope made of fiber foam handles and fiber rope with spring with counting & timer, pole vault cross bar as per the standard, hand air pumpsas per the standard, balls containers steel case with trolly, ball bagsmicro material bag, antenna(fibre glass)steel with fibre glass, hammer throw (5kg) turned iron made of standard athletics, hand inflatorshand air pump with gape, leg inflatorsair pump with page, shot carriers steel case with trolly, starting clapper made of wooden steel with rubber coated handle, long jump spring this is made of heavy duty steel frame & 9 springs. powder coated inc durability & covered with suede fabric, discuss 2kgmade of wodden with steel rim, discuss 1.75kg made of wodden with steel rim, discuss 1.5kgmade of wodden with steel rim, discuss 1kgmade of wodden with steel rim, shot put 7.26kg turned iron made of standard athletics, hammer throw (4kg)turned iron made of standard athletics, swimming tubesitem weight-2000grams(2kg), 12l-12w centimeters, swimming lerning kit item weight710 grams. multicolour and 25l-8w centimeters, swimming life guard dimension 20-15cm 40 to 140 kilograms, swimming beginners learning padsitem weight 200grams and dimensions 26-20-20cm200g, volleyball moveable pole 4dia movable pole set with crank system for height adjustment, cricket set wooden bat with handle and grip, english willow or higher quality wood, cane handles with rubber grip, width of standard bat blade and weight of the 1000 ti 1100 gms etc., stopwatches(100 laps)high precision timing, waterproof design, ergonomic design,, chess mats with pawns all the squares are equal in size with fiber woodan pons, footbal hand stiched 32 pannel for high quality synthetic water proof suitable for all weather condition,, throw ball netmaterial nylon hdpe 4 side tape., throw ballmateral rubber weight0.41 kilogrms rubberized hand stitched 18 pannel, football netsyntheticwire, 7.32mtr, shuttle cocks(6pic)nylon shuttle cocks nylon shuttle - green (slow, 75, pack of 6), badminton rackets sizeweight, isometric shape, beam, shotput toe board syntheticmade of casted aluminium/wodden weather resistant, high jump standitem weight8kg, dimensions, thletic starting lane boxlength centimeters and weight5kg 250g, dimensionscentimeters, athletic measurement tape (100mts)flexiable tool used for measuring made of syntheic tape, marathon, athletic measurement tape (50mts)flexiable tool used for measuring made of syntheic tape, athletic measurement tape (30mtr)flexiable tool used for measuring made of syntheic tape,, athletic relay batons (metal) made of synthetic aluminium pipe, turn from both side, anodize in 8 different colours., basketball top grip circumference 67-70cm, bladder buty, pu rubber, water proof, nitroflate molecular nivia/equivalent, wrestling mat with cover wrestling mat made of pure eva, with nylon cover of non slippery, non tearing & non painted colour, football carry bags made of micro metrical, tennokoit ringmade of rubber, out door gym air swing dimensions-1100-900-1250, out door gym leg thigh machine dimensions-1350-1700-1250mm. thikness of pipe2.5mm to 7.5mm, out door gym shoulder wheel dimensions-1100-900-1250mm., out door gym arm wheel dimesions-2044-500-1500mm, out door gym double chest press dimensions-850-800-1800mm, out door gym cycling machine dimensions-1450-1350-700mm., out door gym tripal stading twister dimensions-2100-902-1700mm., out door gym parllel bar dimensions1100-500-1450., dubble air walker dimensions-1150-600-1500mm., out door gym air walker dimens

State Government

CTN :42919224 Due date: 05 Dec, 202505 Dec, 2025 2.44 Lacs
Tender For corrigendum : - tender for aug. of existing 250kva, 11/0.4 kv s/stn. jibhi into 400kva, 11/0.4 kv s/stn. in (e ) section jibhi uesd, hpsebl, banjar. (t.s. 09/2025-26) - supply part dtr 400 kva, supply of lt distribution panel box suitable for 400 kva s/stn of size 1100x800x275mm +/- 5% made of steel sheet of 1.63 mm thickness having double door locking arrangement duly powder coated painted complete withlt distribution panel box with mccb 630 amp 3p 50ka-1 no. make l&t , schneider and abb only, mccb 250 amp 36ka 3p of l&t schneider and abb make only 3no. mccb rating 250amp, 3 poles having following specifications (1) minimum frame size 250 amp (2) type variable trip free, (3) breaking capacity- isu & lcs at 415, 50 hz (ka: not less than 50 ka) (4) , thermal release range: 320-440amp (5) mecanical life (operation) 20000 no. (6) electrical life (operation) 4000 no. (7) rated insulation voltage (v) 690v (8) tripping thermal releasing setting : thermal-o/l variable setting (9) tripping magnetic releasing setting : magnetic- s/c fixed setting (12) in (10) (operation) volatge 415v, ac (11) caliberation temperature: 40 degree c (12) high voltage withstand voltage : 3kv for 1 minute (13) confirming to is : 1993/60947-2, 1989 (14) make l&t/ havells/abb/ hpl/ schiender and approved vendor of hpsebl (15) ics : 100% icu reangular type aluminum alloy bus bar of 250 amp. having length 800 mm of phase 800 mm long for netural outgoing feeder 3 nos. outgoing feeders shall be made in the pannel u type single pole mccbs of 400 amp. shall be provided in all 3- phases. the panel shall be fully wired with insulated copper wire have adequate clearance . as per standard specification, supply of aluminium thimble, supply of aluminium thimble, supply of lt cable (3.5 core ) 400 mm2 (incomer), supply of lt cable (3.5 core ) 240 mm 2 (outgoing), erection of dtr, erection of 400 kva , 11/0.433kv dtr, erection of lt box, providing earthing connection including g.i.wire to g.o switch erection of jumper, laying of lt cable, complete in all respect., transportation charges inclusive of hydra crane charges and mannual carriage of dtr and its associate material., add dismantling charges of old dtr (250 kva dtr) and allied accessories @50% of erection of new dtr.

CTN :42995126 Due date: 11 Dec, 202511 Dec, 2025 NA
Tender For supply of m and l for framed work in doors frame as specified in scope , s and f 35 mm thick hard wood glazed and skeleton shutter as specified in scope , s and f 125 mm long butt hinges as specified in scope , s and f 150 mm long tower bolts as specified in scope , s and f 150 mm size door handles as specified in scope , m and l for sliding door bolt of 300mm longas specified in scope , m and l for preparation of new wooden surface as specified in scope , m and l for preparation of new steel surfaces as specified in scope , s and f stainless steel wire cloth as specified in scope , m and l for preparation of surfaces of walls as specified in scope , s and f 300mm ordinary rat tail rod pattern springs as specified in scope , s and f cast iron body hydraulical door closer as specified in scope

CTN :42998020 Due date: 16 Dec, 202516 Dec, 2025 NA
Tender For supply of executive table grade-1 , executive chair grade-1 , computer table , cupboards steel , cupboard - library safewel almira with glass fitted door , notice board , visitor chairs , three seater airport chair , executive table grade-2 , executive chair grade-2 , table regular , cushion chairs , chairs plastic , key holder frame , table big 4ftx6ft , green board - black board 3ftx6ft , rotating stools steel , book racks , journal racks , museum racks steel four steps , museum racks wooden , demonstration chairs chair with writing pads wooden chair , podium , working table without drawer 3x4 feet , student desks 04 seating capacity , lab racks , student lockers 12 compartments , student cushion couch , chairs for students rooms , cupboards almirah , dining tables with chairs each table to seat 16 members for dining steel fabrication , sitting chairs reading room , 10library tables , 50 chairs for library

State Government

CTN :42953834 Due date: 04 Dec, 202504 Dec, 2025 NA
Tender For construction material purchase - construction material, cement (is) (rate 50kg per bag) ordinary portland cement (opc) ppc- portland pozzolana cement) 43 grade 53 grade, (is) thermo mechanically treated bars (tmt) mild steel rod (rate per kg) required in 6mm, 8mm, 10mm, 12mm, 16 mm dia, sand (white sand) (rate per cubic metre) excluding void is: 1542 is : 2166 for using it in construction works, aggregate (rate per cubic metre) excluding void 20 mm nominal size graded stone aggereate, hard moorum (rate per cubic metre) excluding void hard murum having cbr>12%, stone dust (rate per cubic metre) crusher stone dust, brick (rate per thousand numbers ) (size 190*90*90mm) well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process crushing not less than 40 kg/cm to and water absorption not more than 15%, floor tiles (rate per square feet) size 300x300 mm size 600x600mm ceramic glazed tiles is tiles thickness 6 to 7 mm, wall tiles (rate per square feet ) size 300x450mm ceramic glazed tiles is tiles thickness 6 to 7 mm, pavar block (per nos) size dimensions : 200 x 160 mm thickness 60 mm - 80 mm, kota stone (per sqt) thickness 25mm - 30 mm, western commode (rate per each) size 360 mm x 475 mm x 395 mm anti germ fluro polymer coated water closet european type w c pan size 360x475x395 mm with solid poly propelyne made soft closing seat cover, wash basin (rate per each) 570mm x 470mm x 190mm all fittings and fixtures, door frame (rate per kg) size 100m x 50mm x 1.6mm profile c of 1.6mm thick single rebate is 4351 manufactured from commercial mild steel sheet, flush door (rate per kg) size 1800mm x 850 mm and 35 mm is marked flush door shutters is : 2202 (part 1) decorative type core of block board constructred with frame i st class hard wood and well matched teak 3 ply veneering with verical or cross bands and face veneers on both faces of shutter, profile sheet (iron sheet) 7 mm thick 22 gage rater per kg is clirted galvanized irons (ms), iron wire (rate quoted is per kg) is clirted galvanized irons (ms), door wmd size 29 x 70 feet is clitred is granted under is 3614:2021, door frame wpc (solid) size 36 x 70 x 3 feet is certifed, door frame wpc (solid) size 26 x 70 x 3 feet is certifed, door frame wooden size 36 x 70 x 3 feet wooden, door frame wooden size 29 x 70 x 3 feet wooden, sliding window black color 1 mm thick is - certified aluminium, sliding window silver color 1 mm thick is - certified aluminium, sliding window silver color 1.5 mm thick is - certified aluminium, mosquito mat door 1 mm thick is - certified aluminium, window/ ventilator/iron (rate quoted is per kg) is - certified aluminium, door wmd size 36 x 70 feet is certified, door pvc screen solid size 36 x 70 feet is certified, door wpc solid size 36 x 70 feet is certified, door wpc solid size 29 x 70 feet is certified, door hollo pvc size 29 x 70 feet is certified, window frame wpc (solid) size 5 x 4.6 x 3 feet is certified, window frame wpc (solid) size 4 x 4.6 x 3 feet is certified, window frame wooden size 5 x 4.6 x 3 feet is certified wooden, window frame wooden size 4 x 4.6 x 3 feet is certified wooden, sliding window black colour 1.5 mm thick is certified ms, iron pipe 2x2 (1.6mm) 16 gage (rate quoted is per kg) is certified ms, boulder (rate per cubic metre) excluding void density range from approximately 2400 to 2800kg/cubic metre)

CTN :42739484 Due date: 08 Dec, 202508 Dec, 2025 NA
Tender For corrigendum : supply of mechnical consumables d d -nylon teflon tape 10 meter length 1 by 2 inch width , air bubble film , server rack , plastic tool box for mechanic machine tools , plastic single tier tray , plastic box medicine kit , anti static tray size 2 , steel tool box mechanic machine tools , tool trolley or accessories , steel ratchet type torque wrench range 50 20 nm , vanadium steel insulated allen key set , bit drive set with screw driver bits , fixed base bench vice , double ended jaw spanner set , rubber mallet type b , measuring tape 30 mtr , stainless steel no 5 measuring tape , hardened and tempered steel strips handsaw with wooden handle saw frame type a , garg furniture revolving chairs with knee tilt mechanism , corded brushed electrical drill 50 watt , cordless brushed electrical drill 18 watt , scissor 200mm , shelving cabinets large with glass door , shelving cabinets large almirah steel

State Government

CTN :42975278 Due date: 15 Dec, 202515 Dec, 2025 3.00 Lacs
Tender For purchase of furniture items - officer table :- providing and supplying table of size 5 x2 6 x2 6 with c-frame leg 200 mm wide made of aluminum profile and crca formed section having provision for wire management. top made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminate, wooden edge banding of edges. dotted embossed cable duct and with single drawer (w-350 mm, h-165 mm, d-475 mm) with branded telecopic channel. all steel components are epoxy powder coated after seven tanks. anti-corrosion., officer chair :- supply and placing high back revolving chair size total height 1030-1115 mm, depth 685 mm width 590 mm seat hight 425-510 mm, 5- prong nilony base for stability twin wheel heavy duty caster for easy mobility under load hot pressed plywood with steel t-nuts for rigid fasting seat and back are covered with pp cover, sturdy steel colum gas lift for center support and seat height adjustment, telescopic abs cover over steel colum low cable center tilt mechanism and with single piece integral center tilt mechanism and with single piece integral skin pu arm rest, quality tapestry high density molded pu cushion., staff chair :- supply and placing staff chair size total height 850 mm depth 570 mm, width 550 mm seat hi=eight 440 mm, uinder structure cantilever type ms crca tube 1.6 mm thick. hot pressed plywood with steel t-nuts for rigid fastening. single piece integarl skin pu arm rest. quality tapestry. high density pu molded cushion. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface., waiting chair :- supply and placing waiting three seater fixed chair, size ; total length 1800 mm, total height 750 mm, total depth 630 mm and seat height 410 mm, made of ms crca press formed seat components duly seamless welded to get proper finish chrome plated handles & base. steel perforated ms moulded one piece seat and back fitted in moulded chrome plated side strips, three individual seat fitted on ms tube support of 75 mm x 35 mm, seat and bottom support are powder coated., computer table :- supply and fixing in position computer table (work station) having size length 900 mm, width 600 mm, height 760 mm, c-frame & tubular crca steel structure, fabrication involves only mig/tig & spot welding. top & shelf made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminated, wooden edge banding of edge, shelf adjustable on steel brackets. removable tubular cpu stand and an embossed modesty panel below table top provided. provision for wire management, drum type leveler. all steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface., plastic chair:- plastic arm chair for office, godrej almira :- godrej interio almira slim size 2 door steel almira, 4 shedves, size length 1828 mm, width 914 mm, water cooler :-cooling capacity- 5 ltr./hr.number of taps- 2color- whiteweight- 10 kg., cash counter:-office reception table & cash counter desk of woodenproduct dimensionslength 48 , width 24 , height 36 approx., record rack :-material- mild steelno. of shelves- 5 shelvesmount type- finish type color- greyusage/application- officerack type- open rackappearance- modernproduct type- pre standing unitassembly required- no, bench :- product dimensions12d x 48w x 18h centimetersmaterial- stainless steekframe material- stainless steelcolour- silverstyle- antiquesize- 48"l x 12.3"w x 18"h overall size: 48"l x 12.3"w x 18"h, digital electronic safe locker for office with auto lock function, anti-theft alarm and led displays size length 500 mm width 350 mm

CTN :42968312 Due date: 08 Dec, 202508 Dec, 2025 NA
Tender For supply of misc cat b stores d d -supply and fabrication of one roof truss of 12 m length as per drawing in all respect of riveting, welding, fixing to column and perlin for roofing, steel work of structure. , supply of prefabricated steel door of size 1800mm x 2500mm frame made of angle iron 30 mm x 30 mm x 5 mm , supply of prefabricated steel door of size 975mm x 1950mm frame made of angle iron 30 mm x 30 mm x 5 mm , supply of prefabricated steel door of size 1500mm x 1950mm frame made of angle iron 30 mm x 30 mm x 5 mm , supply of prefabricated embrasure shutter steel door of size 500mm x 450mm frame made of angle iron 40 mm x 40 mm x 6 mm , supply and fixing of fibre glass sheet opening on repanway size 6 ft x 4ft ,for lighting and ventilation purpose. , base plate 230 x 230 x 12 mm with 4 nos bolt for each plate , galvanized coated ridge sheet at crown of roof size 7ft x 4ft ) /bid number: gem/2025/b/6894232 * /dated: 28-11-2025 & & / bid document1 / 14
 Loading, Please wait...

Connect us via What's Up