Latest emery sheet Tenders | Government emery sheet Tenders

State Government

CTN :40124638

14 May, 2025 NA

Multi City - Telangana

Tender For supply of general consumables - abrasive cloth, emery, sheet, mdm, 230x280mm 2 200015901 roll emery, 2x50mtr 3 200015791 emery cloth sheet, 230x280mm, water emery 4 200015923 super fine emery cloth sheet, 230x280mm 5 200020294 m-seal slow setting 6 100044538 m-seal(quick setting) phatta plated,1kg 7 200018780 white dry asbestos braided packing rope suitable to withstand temp 500 deg centigrade, size 10mm dia 8 200018778 white dry asbestos braided packing rope suitable to with stand temp 500 deg centigrade, size 6mm dia 9 200018779 white dry asbestos braided packing rope suitable to with stand temp 500 deg centigrade, size 8mm dia 10 100045339 asbestos packing ropes, size-12mm 11 200014009 manila rope 16mm dia 12 200015823 neoprene rubber gasket, sheet size-1mx2mx 3mm 13 200015824 neoprene rubber gasket, sheet size- 1mx2mx4mm 14 200015825 neoprene rubber gasket, sheet size- 1mx2mx6mm 15 100100653 silica gel blue, 8-10mm 16 100082639 gland packing rope, 16mm, graphited

CTN :40146317

07 May, 2025 NA

Villupuram - Tamil Nadu

Tender For supply of emery sheet and grinding wheel

Central Government/Public Sector

CTN :40152277

19 May, 2025 NA

Mumbai - Maharashtra

Tender For supply of reinforced resinoid offset grinding wheel, size: 100mm x 4mm x 16mm, grade-a.36.q, bf type-27, for use on general steel materials. max-rpm 13700. make- hitachi/power tool/wood craft/norton/ bosch/carborandum/hindustan abrasive or similar [ warranty period: 30 months after the date of deliver y ]

Central Government/Public Sector

CTN :40152278

19 May, 2025 NA

Mumbai - Maharashtra

Tender For supply of reinforced resinoid offset grinding wheel, size: 100mm x 4mm x 16mm, grade-a.36.q, bf type-27, for use on general steel materials. max-rpm 13700. make- hitachi/power tool/wood craft/norton/ bosch/carborandum/hindustan abrasive or similar [ warranty period: 30 months after the date of deliver y ]

corporations/Associations/Others

CTN :40078927

19 May, 2025 6.56 Lacs

Puruliya - West Bengal

Tender For custom bid for services - reconditioning of coal feeder outlet reducer portion (chute) for both units of rtps-1. transportation of damaged/worn-out feeder outlet reducer portion (chute) from rtps, dvc site to vendor workshop and repaired chute from vendor workshop to rtps, dvc site is in the scope of vendor. 2. loading/unloading of materials are in the scope of vendor except at rtps, dvc site. 3. a joint inspection will be done at rtps site for noting & area marking on chute (area to be repaired) before receiving of material. 4. measure the worn-out portion & cut it completely with the help of cutting tools or plasma cutter. 5. grinding and edge preparation is to be done as per requirement on plate before welding. 6. fit the new plate as per requirement and weld it in chute with proper welding electrode308l and grind finish is required after welding. 7. new plate & its bending in required shape is in the scope of vendor. 8. all consumable like welding electrode, cutting wheel, grinding wheel, etc. are in the scope of vendor. 9. plate material (plate thickness-12 mm, material- ss304, make will be only of three company sail, tata & jindal) is in the scope of vendor. 10. repairing/replacement of ms flange if required will be in vendor scope. 11. payment will be made on actual square meter repaired by vendor. 12. quantity of chute for repair is 12 nos it may vary (may be increase or decrease). 13. delivery period is 180 days after placement of wo. 14. part payment against part supply is acceptable. 15. the reconditioned chute has to be guaranteed for a period of 12 months from the date of supply & 06 months from date of commissioning whichever is earlier against bad workmanship. guarantee/warrantee certificate to be furnished at the time of completion of work. 16. party has to submit the 1:1 fitment cum interchangeability certificate of material. 17. the party has to submit the indemnity bond after placement of work order. 18. pre-dispatch inspection shall be carried out by m/s dvc at vendor s works and the vendor has to intimate 15 days in advance regarding readiness of the material. 19. dimensional verification & positive metal identification (pmi) test shall be carried out during pdi for ss 304 plates welded to chute and the vendor has to arrange machine with valid calibration certificate at their own cost. 20. all the old & damaged scrap cut during the course of work shall be returned to m/s dvc during delivery of chute at rtps.

CTN :40056035

28 Apr, 2025 50.00 Lacs

Sujangarh - Rajasthan

Tender For supply of materials for construction in gram panchayat bagsara athuna (for mgnrega verius ,plans on bsr 2025-26. f.y. 2025-26-, diesel road roar 8 to 10 tonne, , sheep foot roller, , truck 9 tonne, , tractor (25.40 hp), , tractor trolley, , tractor water tanker capacity 4000 litres water, , cement concrete mixer 57 pan foot, , pumping set 15 h.p., , niddle/plate vibrator with operator, , camel cart/bullock cart with driver, , grinding machine with operator (large motor driven), , compressor, , hydraulic excavater/jcb (bucket capacity 0.4cum), , dumper, , scraper, , shuttering of wooden planks with poles and other materials to be installed on tpsite and removed after the stipulated period, , shuttering of ply with poles and other materials to be installed on tpsite and removed after the stipulated period, , shuttering of iron plate with poles and other materials installed on tps site and removed after a specified period, , water and pumping material (filling), , grinding machine (small operator, hand operated), , padla/kankar/jhajra, , mortar-soil/mud-masala, , lime from brick kiln for roasted masonry work, cement, ppc, white cement, fine aggregate, sand/bajri, gravel local, fly ash, surkhi, stone dust in masonry work, gitti of stone/brick (for other than road work), 40mm measured stone (hand broken grit) (boids cut 1/11), 40mm grit of stone (broken by crusher) (boids cut 1/11), 20mm chit of stone (broken by crusher), 12/10/6mm chit of stone (broken by crusher), brick clay, material for machining work (5 km, including lead), 6340mm stone crushed stone (boids cut 1/11), 63.40mm stone crushed stone (boids cut 1/11) cut 1/11), 9045 mm, hand broken stone aggregate (boids cut 1/11), quarry ravinsh. boids cut 1/6), graven (voids cut 1/6), puncture (boids cut 1/6), (22.5 x 11 x 7.50 cm), pacham peni (1st class), dinesh cheni (ii class), bhonima masonry stone, vinai nerada (rr), nimai gada (cr), baja gaalim upto 15cm height for purge work), paraja monim (23cm height for gadak/gharanja work), jodhpuri rai stone strip dhap shovel pieces (mumbai 2-3. thickness 10-12", thickness 2.5-3.5"), flaky material (3-4" thick & length and width 1-, 2), minister (dpc, sill, coping, lintel, tand, almirha etc), upto 25mm thickness, upto 21-40mm thickness, upto 40-50mm thickness, upto 50-75mm thickness, upto 75-100mm thickness, upto 100-150mm thickness, parn / patti patan katja stone, ? , 001 to 2300 cm, , more than 200 sq. cm, marble powder, marble stone (gajnagar ii quality/local 20mm thick., 000 sq. cm, 901 to 2300 burn cm and, more than 2300 perm, stone frame, single patam size 100 x 75 mm,, either patam size 125 x 75 mm., stone strips, up to 1.5 m length, minimum 40mm thick, 1.5 m to 2.40 m length, minimum 50mm thick, 2.4m to 3.0 m length, minimum 65mm thick, above 3.0 m length, minimum 75mm thick, precast tiles/blocks, glazed size-30x45 cm, mosaic size 40mm thick, vitrified size-60x60 cm, interlock tiles/brick/block for road work, cement interlocking block m-30grade, 60mm thick, cement interlocking block m-30grade, 80mm thick, cement interlocking block m-30grade, 100mm thick, fr pvg insulated copper conductor single core cable 151 marked, 1.50 sq.mm, -, , 4.00 sq.mm, 6.00 sq.mm, 0.50 sq.mm, 1.00 sq.mm, local wood with fittings (for doors, doors and fences.) fire, acacia, others, factory made doors (30mm thick solid core single pane., structural steel, +, iron (door steel fe 415/500 for reinforcement), winding wire 18 gauge, iron girders, conia iron pokor bar/patti/angle iron, barbed iron wire (size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, mesh, iron mesh (24 gauge, mesh), cement concrete mesh akash patal 40mm thick, 3mm thick glass, paint, enamel paint, distorter (water bound), lime for painting (aras/kali), primer (for iron/wood), petroleum products, diesel hsd, mobil oil, , hand wash-basin 450*300mm with cupintv p.v. m. vent pipe, stone bar (5.w.) pipe 100 m.m. diameter, 0.6 m. long, m. p. pillar cock (dia

CTN :40056051

28 Apr, 2025 80.00 Lacs

Sujangarh - Rajasthan

Tender For material supply for the year 2025-26 for execution of works sanctioned under various schemes of mahatma gandhi nrega, rural development and panchayati raj department-, 2, diesel road roller 8 to 10 ton, sheep foot roller, truck 9 tom, tractor (25.40 hp), tractor trolley, tractor water tanker capacity 4000 liter water, cement concrete mixer 57 pan foot, pumping set 15 ab. p., niddle/plate biver with operator, camel gahhi/velbhadi with driver, grinding machine with operator (b-motor operated), compressor, hydraulic excavater/jcb (bucket capacity 0.4cum), imper, scraper, shuttering wooden planks with beams and other materials to be removed after the prescribed period of time, nuttering ply with beams and other materials to be removed after the prescribed period of time, shuttering iron plates with beams and other materials to be removed after the prescribed period of time, nani and pumpable (bhagai), grinding machine with operator (small, hand operated), padla/kankar/jhalra, mortar-soil/mud masala, lime from kali kiln for masonry work, , mement, p.p.c., white cement, fine aggregate, sand/gravel, gravel local, fly ash, surkhi, stone dust in masonry work, grit of stone brick (for other than road work), 40mm measured stone (hand broken grit) (cut balls 1/11), stone chips (broken with saffron) (cut balls 1/11), 20mm stone grit (broken with saffron), 12/10/6mm stone chips (broken with saffron), brick chips, material for machining work (5 km, including lead), 6340mm stone crushed stone chips in crusher (cut balls 1/11), 63.40mm stone crushed stone chips in hand (cut balls 1/11), 9045 mm. hand broken stone rohi (boids cut 1/11), fery ravish (boids cut 1/6), weight (boids cut 1/6), car (voids cut 1/6), +, , (22.5 x 11 x 7.50 cm), 1st class (1 st class), 2nd class (class), monig / baranja / masonry stone, masonry berda (rr), masonry radda (cr), gharanja monig (for perch work upto 15cm height), gharanja molig (for road/kharanja work upto 23cm height), -jodhpuri type stone strip / chash katal pieces (length 2-3', width 10-12", thickness 2.5-3.5"), stone theep (flaky material) (3-4" thick & length and width 1-2"), sandstrein (dpcl, coping, lintel, tand almirha etc), upto 25mm thickness, 0.2, upto 25-40mm thickness, 10.3, upto 40-50mm thickness, 10.4, upto 50-75mm thickness, 10.5, upto 75-100mm thickness, 10.6, 11, upto 100-150mm thickness, 11.1, floor patina fatma stone, floor tiles upto 35mm thick, min. 3 sqft or more area, 11.2, color for strip coating 80-75mm thickness min. 3 sqft or more area, 11.3, rough kota stone without polish, 1.3.1, upto 500 sq.m., 1.3.2, 41 to 2300 sq.m., 1.3.3, more than 2300 sq.m., 11.4, polished kota stone (one side polished), 11.4.1, 900 sq.m., 11.4.2, 101 to 2300 sq.m., 11.4.3, 0, more than 2300 sq.m., 0.1, , upto 900 sq.m., upto 2300 sq.m. in 50%, more than 2300 sq.m., marble chips, marble powder, marble stone (rajnagar ii quality/local 20mm thick), +, upto 700 sq.m., 901 to upto 2300 sq. cm, more than 2300 sq. cm, stone frame, echal paitaam size 100 x 75 mm., echal mainam size 125 x 75 mm., stone strips, up to 1.5 m length, minimum 40mm thick, 1.5 m to 2.40 m length, minimum 50mm thick, 2.4m to 3.0 m length, minimum 65mm thick, above 3.0 m length, minimum 75mm thick, precast tiles/blacks, glazed size-30x45 cm, mosaic size-40mm thick, vitrified size-60x60 cm, interlock tiles/brick/block for road work, cement interlocking block m-30grade, 60mm thick, cement interlocking block m-30grade, 80mm thick, cement interlocking block m-30grade, 100mm thick", fr pvmi immunated copper conductor single core coil isi marked, 1.50 sq. m,, 1, , 4.00 sq mm, 6.00 sq mm, 0.50 sq mm, 1.00 sq mm, local wood with fittings (for doors, windows and furniture), mango, acacia, others, factory made doors (30 mm thick, solid single panel), structural steel, iron (tor metal fe 415/500 for reinforcement), binding wire 18 mesh, iron girders, conical iron/square bar/patti/angle iron, barbed iron wire (size 12 gauge wire and 12 gauge stra

Central Government/Public Sector

CTN :39985963

24 Apr, 2025 96.01 Lacs

Narsinghpur - Madhya Pradesh

Tender For corrigendum : custom bid for services - 02 year maintenance contract for hmv in ntpc chp gadarwara-line item 10.10: deptt <> deployment of technician & electrician(adl) to carry out timely maintenance to ensure smooth functioning of all machines. for maintenance of all hme s (such as dozer/crane/pay loaders/hydra/backhoe loader/skid steer loader/ fork lifter/bot/excavator) during running or s/d. to investigate during machine breakdown, the cause of breakdown. to dismantling, repairing and replacing defective parts of breakdown machine. to inspect machine with oem engineer and finding solution to resolve problem. to maintaining the machine as per oem schedule to keep it in continuous operation. tech. (mech. & elect.) will have to report to their supervisor or ntpc representative daily. deployment of 02 hsw technician (01 mechanical & 01 electrical) per day to attend defects in any heavy mobile equipment. min. 05 years exp. with same field for hmv maintenance. line item 10.20: deptt <> deployment of automotive mechanic/electrician (adl) to carry out timely maintenance to ensure smooth functioning of all machines. for maintenance of all hme s (such as dozer/crane/pay loaders/hydra/backhoe loader/skid steer loader/ fork lifter/bot/excavator) during running or s/d. to check all machines on daily basis. to servicing all machines as per oem schedule. to replace faulty parts. to checking machine dashboard and replacing or repairing faulty meters. to checking and maintaining starter motor, battery and alternator on daily basis. to set tension of track chain assembly of dozer and excavator. to report to their supervisor or ntpc representative daily. deployment of 02 sw (01 hmv automotive mechanic & 01 hmv automotive electrician) per day to attend defects in any heavy mobile equipment. min. 05 years exp. with same field for hmv maintenance. line item 10.30: deptt <> deptt <> deployment of junior technician (adl) to carry out timely maintenance to ensure smooth functioning of all machines. for maintenance of all hme s (such as dozer/crane/pay loaders/hydra/backhoe loader/skid steer loader/ fork lifter/bot/excavator) during running or s/d. to grease the chassis/pin of all machines as per schedule. to check all types of oil, coolant in the machine on daily basis and topping up when short/less. to repair broken frames and bodies of machines by cutting, grinding and fabrication. to repair punctured tyres, and replace damaged tyres. to bring materials from ntpc store, keeping them organized in dozer shed store. to report to their supervisor or ntpc representative daily. deployment of 02 ssw junior technician per day to attend defects in any heavy mobile equipment. min. 05 years exp. with same field for hmv maintenance. line item 10.40: deptt <> deployment of helper(adl) deployment 02 usw helper to perform all supporting task (such as housekeeping, washing of equipment, picking up spare parts) as directed by the supervisor or eic. to report to their supervisor or ntpc representative daily. line item 10.50: opn of crane (>10 40 mt) (abcrn02gn702) 1. operation of mobile crane (such as rt-40, 11ton hydra) as per requirement during the general shift and extended hours anywhere as per requirement & as per instruction of engineer-in-charge. 2. checking and cleaning of mobile crane before starting of operation. 3. checking the water and diesel level in the vehicles on daily basis. 4. checking and guiding during diesel filling in the vehicles as per requirements. 5. visual inspection of the equipments, report to the site engineer or eic, defects if any. 6. operation of equipments as per site requirements in general shift. 7. parking the vehicles on proper location after completion of operation work. 8. any defects observed during operation to be reported immediately to eic. 9. check the machine daily as per the checklist and fill the checklist. 02 hsw operator with valid heavy mobile equipment driving license with minimum 03 years e

Central Government/Public Sector

CTN :40019165

13 May, 2025 NA

Dehradune - Uttarakhand

Tender For annual rate contract for building materials - building materials :, acrocrete (1 x 20 litre) make acro /dr. fixit, adhesive tape roll 4" x15 isi mark, aluminium sheet 1 mm thickness make bansal/bhusan, angle iron make tata /apollo, apex (1x 4 ltr.) required colour make asian, apex (1x 20 ltr.) required colour make asian, apex white (1 x 4 ltr.) make asian/acro, apex white (1 x 20 ltr.) make asian/acro, barbed wire galvanized make isi mark, bitumen good quality, binding wire iron good quality, black nails wooden make vishal/ bansal, board 19mm make centaury, board 25mm make centaury, brick avval make gagan, brush (iron) with plastic body make good quality, clear varnish (1 x 1 litre) make wax poll/himalayan, clear varnish (1 x 4 litre) make wax poll/ himalayan, coarse sand good quality, colour sheet make tata/apollo, corrugated sheet make tata/apollo, crasher stone good quality, curtain rod fancy make lotus, curtain rod ordinary make lotus, cutting wheel 14" ( black colour)make alfa/vishal, chain link fencing isi mark, chain isi mark, cutting wheel 4" (black colour)make alfa/vishal, damp proof (1x20 ltrs) make asian/burger, dap (iffco), dandala (heavy duty) 10" make tata/bhusan, dandala (heavy duty) 12" make tata/bhusan, dandala (heavy duty) 8" make tata/bhusan, distemper brush 2" make asian/sunrise, distemper brush 3" make asian/sunrise, distemper brush 4" make asian/sunrise, distemper brush 5" make asian/sunrise, door closer isi mark make henex/evergreen, door seal make asian/bansal, door spring, make 555, double door stopper make vishal/standard, double patam pipe make appolo/rathi, dr. fixit (1x1litre) make dr. fixit, dr fixit (1x5 lit.) make dr fixit, electric planner blade 5" make hss/hcs, fastener m-10 make hp/hb, fevicol sh(1x1kg), fevicol sr(1x1kg), fiber net, file 10" and 12" make isi, fine sand good quality, flush door (24"x82") make century/greenply, flush door (36"x82") make century/greenply, flush door (39"x82") make century/greenply, gland dori good quality, glass cutter make modi, goti 2" make vishal/bansal, grease make waxpoll/survo, grinding wheel 4" make alfa/matrix, sand paper good quality, g.i. wire good quality, gypsum screw " make mpire fasteners/lotus gold, gypsum screw 1"make empire fasteners/lotus gold, gypsum screw 1.5"make empire fasteners/lotus gold, gypsum screw 2"make empire fasteners/lotus gold, hammer drill bit 1.5 shoot make hss/hcs, hammer drill bit 2 shoot make hss/hcs, hammer drill bit 3 shoot make hss/hcs, hammer drill bit 5 shoot make hss/hcs, handles (iron) 100 mm 125 mm 5"(12 pcs) inch. make jindal/standard, handles fancy make (12 pcs)jindal/standard, handles 5"(12 pcs) make jindal/standard, hanger good quality, hings 2" make vishal/ bansal, hings 3" make vishal/ bansal, hings 4" make vishal/ bansal, hings 3/4"x 6 make vishal/ bansal, iron bit 1 shoot make hss/hcs, iron bit 2 shoot make hss/hcs, iron bit 3 shoot make hss/hcs, iron bit 4 shoot make hss/hcs, iron bit 5 shoot make hss/hcs, trowel (karni) big good quality, trowel (karni) small good quality, lattu( curtain rod) make steel, lattuwooden( curtain rod) make good quality, locking bolt isi, lime (1x20 kg) good quality, m.s. bar make tata tiscon/jsw steel, m.s. patti make tata tiscon/jsw steel/rathi, m.s. pipe make apollo/rathi, m.seal 01 kg make piddilite/resinova, ms bail isi mark, ms jali isi mark, measuring tape 3 mt. make fremans/stanley, measuring tape 5 mt. makefremans/stanley, measuring tape 30 mt. make fremans/stanley, measuring tape 100 mt. make fremans/stanley, mementos good quality, metal screw " make vishal/bansal, metal screw 1" make vishal/bansal, metal screw 1 " make vishal/bansal, metal screw 1 "make vishal/bansal, metal screw 2" make vishal/bansal, mosquito proof iron jali width make kishan/vishal, mosquito proof steel jali width make kishan/vishal, nails " 17 no. wooden make vishal/ bansal, nails 1 " 14 no. wooden make vishal/ bansal, nails 1.5" 14 no. wooden make vishal/ bansal, nails 1" 17 no. wooden make vishal

Central Government/Public Sector

CTN :40010121

05 May, 2025 NA

Mehsana - Gujarat

Tender For sealed tenders are invited for supply of following items/services for the year 2025-26 (up to 30.04.2026) 1) grocery (kirana items) 2) vegetables 3) fruits 4) grinding 5) sweet/dairy items 6) colour materials 7) hiring of tractor, jcb, for m&r work 8) computer a.m.c 9) electric items 10) septic tank and drainage line cleaning 11) tuck shop on contract 12) labour for white wash & colouring 13) maintenance - water purifiers 14) mandap on rent 15) students hair cutting 16) press & washing 17) graphics & flaxbanner. 18) plumbing items 19) scrap selling-old news paper, oil tin etc.

Emery Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector