Latest enclosure Tenders | Government enclosure Tenders

CTN :45518432

22 Jun, 2026 NA

Jalpaiguri - West Bengal

Tender For supply of electric ceiling fan (v4) isi marked to is 374 (q2) , xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , sitc geyser , m and l gi tubing , s and f stop valve , m and l bib tap , m and l point wiring , s and f epoxy powder enclosure , s and f mcb distribution board , m and l earthing , excavation , returning filling , removing excavated material , m and l for sand cushioning , supply and laying brick protection , s and f gi tubing

CTN :45390391

15 Jun, 2026 NA

Darjeeling - West Bengal

Tender For bid to ras supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1),supply of dg,ict charges for dg,pipe earthing,sitc cubical enclosure,excavation,returning filling,removal,sitc dwc pipe

CTN :45390425

15 Jun, 2026 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of split air conditioner, wall mount type (v3) isi marked to is 1391 (part 2),split air conditioner, wall mount type (v3) isi marked to is 1391 (part 2),split air conditioner, wall mount type (v3) isi marked to is 1391 (part 2),s and f enclosure,sub main wiring,supply ss combined,fixing ss combined,m and l sub main wiring

CTN :45287813

18 Jun, 2026 NA

Birbhum - West Bengal

Tender For corrigendum : procurement of complete assembly of feed gate without cylinder with enclosure door for unit 3 overhauling.

corporations/Associations/Others

CTN :45520206

06 Jul, 2026 9.17 Lacs

Kasimpur - Uttar Pradesh

Tender For procurement of different eot cranes accessories, electrical changeover switch for emd-iii and spare parts of hoist and crane for emd-ii etps htps kasimpur - down shop lead (dsl) 125 a 4 pole with all accessories for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), master controller for lt 4 steps for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), master controller for mh 4 steps for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), master controller for ct 4 steps for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), ac brake for lt 160 mm for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), ac brake for mh 250 mm for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), ac brake for ct 100 mm for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), ac brake for ah 200 mm for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), electro hydraulic thruster brake dia 250 mm ,34 kg with brake pad & brake liner for ah for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), electro hydraulic thruster brake for mh dia 300 mm ,34 kg with brake pad & brake liner for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), ac brake for lt 250 mm for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), ac brake for ct 160 mm for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), electro hydraulic thruster brake for lt 200 mm ,34 kg with brake pad & brake liner for 120/30 ton eot crane , make- russian., location -tg hall ctps (1*110 mw), onload changeover switch 4 pole 200 amp 415 volt#type of product:onload changeover switch#,standard-is: 13947 iec 60947-3,unit of measurement piece#frequency-50 hz,rated current (a):200 a,selling unit each#rated voltage-415 v,no. of pole:4 pole,#enclosure sheet, make- havells, schneider ,l&t,abb,hpl, 4 pole change over switch 320 amp#type of product:onload changeover switch#,standard-is: 13947 iec 60947-3,unit of measurement piece#frequency-50 hz,rated current (a):320a,selling unit each#rated voltage-415 v,no. of pole:4 pole,enclosure:steel sheet, make- havells, schneider ,l&t,abb,hpl, onload changeover switch 4 pole 400 amp 415 volt#type of product:onload changeover switch#,standard-is: 13947 iec 60947-3,unit of measurement piece#frequency-50 hz,rated current (a):400 a,selling unit each#rated voltage-415 v,no. of pole:4 pole,enclosure: sheet, make- havells, schneider ,l&t,abb,hpl, voltage-110v ac, 1 no, 3-phase, 415v ac, power contactor a30-30-10-84, current rating - 30a, coil voltage-110v ac, 1no, 3 phase, 415v ac, addon block auxilary contact mnx a2, auxiliary relay, model-my4n-100,50hz,110v ac, contactor ax32-30-10-80,220-230v,50hz, contactor ax09-30-10-80,220-230v,50hz, contactor mnx18 18a,220v,1nc,3pole., contactor 3tf 30-10-10e,220-230v,50hz., contactor ax32-30-10-84,220-230v,50hz., 3 pole power contactor mnx32 in 110v ac, aux contact block 2a ca5 x-10 1no contact, aux contact block 2a ca5-01 1nc contact, olr 3ru2116-1kbo,09a-12.5a., olr ta25du-1.8m,1.3a-1.8a., olr ta25du-15m,10a-14a., olr ux1418,1.25a-2.0a., control transformer 415vac/110vac,200va, control transformer 415vac/110vac,250va, 1-phase 415/110v,50hz,1000a,150va control transformer (panel) insulation class-f , primary current-0.361a, secondary current-1.364a,il-0.66/3kv, miniature relay g2r-2-dc5-5v 5a two set of conversion 2c(dpdt conversion)dip,12.7x28.8mm power relay rohs

CTN :45511009

23 Jun, 2026 NA

Mumbai - Maharashtra

Tender For work of providing safety enclosure at various pumping stations under ae(m)wwes-ii

CTN :45522089

19 Jun, 2026 18.55 Lacs

Pune - Maharashtra

Tender For development of environmental laboratory with aluminium and plywood partition, seating arrangement of staffs, lowering of existing false ceiling, laboratory furniture etc. at cpcb regional directorate office, baner, pune. (balance work). sh: supply & installation of puf panel enclosure, fixing of aluminium partition at cpcb baner, pune.

CTN :45531313

19 Jun, 2026 18.55 Lacs

Pune - Maharashtra

Tender For development of environmental laboratory with aluminium and plywood partition, seating arrangement of staffs, lowering of existing false ceiling, laboratory furniture etc. at cpcb regional directorate office, baner, pune. (balance work) sh: supply & installation of puf panel enclosure, fixing of aluminium partition at cpcb baner, pune.

CTN :45513391

20 Jun, 2026 1.30 Lacs

Faridkot - Punjab

Tender For av ir payload slider , cf propeller cw , payload dampers , cf propeller cww , bottom shell , landing gear assy , top shell , ods cable assembly , gdt enclosure box

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

Enclosure Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government