Latest end mill cutter Tenders | Government end mill cutter Tenders

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

CTN :45296154

01 Jun, 2026 NA

Darjeeling - West Bengal

Tender For supply of tmt bar fe 550 grade 8mm dia , tmt bar fe 550 grade 10mm dia , tmt bar fe 550 grade 12mm dia , tmt bar fe 550 grade 16mm dia , binding wire of 0.9mm dia , plywood 8 feet x 4 feet x 18mm bwr grade , plywood for roof shuttering 8mm waterproof , plywood for wall shuttering 14mm , scaffolding pole adjustable 7 feet long , nails 2 inch, 3 inch and 4 inch 10 kg each , pre-fabricated mild steel door of size 5300mm x 3500mm outer frame made out of isa 50x50x6mm and door shutter frame of isa 40x40x6mm and all as stiffner of isa 40x40x5mm as per drawing , pre- fabricated mild steel door of size 1300mm x 6000mm outer frame made out of isa 50x50x6mm and door shutter frame of isa 40x40x6mm and all as stiffner of isa 40x40x5mm as per drawing , app bitumen membrane sheet of grade 2504 thickness 3.0mm type film, size 20mx1m, minumum weight 2.25kg per sqm , deck sheet curved shape 1.20mm tr-50 including all necessary clamps fittings and fixtures , quick setting compound , water proofing compound in 1 kg packing , fire resistance paint for internal surface , fire resistance primer for internal wall surfaces , synthetic enamel painting to steel surfaces , red oxide primer. , bitumen 80 oblique 20 grade , hdpe pipe 75mm dia best quality , fire extinguisher a and b and c type portable net 2 kg capactiy cylindrical isi marked , supply solar lantern model no ms122 solar lantern contains battery, solar panel, led bulbs , lighting conductors set complete with all accessories as per details given , prefab steel ms plate of size 1000x1000x4mm to frame of size 1050x1050mm , hdpe hose pipe 25mm dia corrosion resistant for water supply pumping water with min thickness of 0.25mm with working pressure 14.22 psi and bursting pressure 28.44 psi , 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set , pcc solid block 400x200x200mm , 100mm thick interlocking tiles machine pressed precast concrete paver block , cement ppc oblique opc 53 grade in poly bag of 50 kg each , sand coarse conforming to is-383 , stone aggregate coarse 20 mm conforming to is-383 , stone aggregate coarse 40 mm conforming to is-383 , hesco basket , transparent pipe 5mm dia bore for water leveling , iron bar 600mmx16mm , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle isi marked , fish line best quality , wood cutting blades , iron cutter blades 14 inch , plumb bob iron best quality , galvanised iron pan mortar 18 gauge 16 inch dia minimum weight of 1 kg , rammer earth with handle , picks axes with chiesel and point ends , showel square nose 14 gauge tata high carbon steel , painting brush 100 mm best quality , synthetic tarpaulin 550 gsm of size 30ft x 30ft , multipurpose non-slip rubber reusable gloves , brick trowel steel 305 mm , heavy duty openable props oblique scaffolding made of ms pipe of 60 and 48mm dia , ms centering plates of size 90cm x 60cm of thickness 14 guage , portable ms body needle vibrator machine with power 3 hp to 5 hp //bid details 2 / 39

CTN :44340083

23 May, 2026 5.43 Lacs

Jabalpur - Madhya Pradesh

Tender For bid to ras supply of 3mm cylindrical shank solid carbide square shoulder end mill cutter for slot milling, side milling. , 5mm cylindrical shank solid carbide square shoulder end mill cutter for slot milling, side milling. , 6mm cylindrical shank solid carbide square shoulder end mill cutter for slot milling, side milling. , 9mm cylindrical shank solid carbide square shoulder end mill cutter for slot milling, side milling. , 10mm cylindrical shank solid carbide square shoulder end mill cutter for slot milling, side milling.

CTN :45261163

10 Jun, 2026 NA

Calcutta - West Bengal

Tender For supply of solid carbide end mill cutter dia 6mm, flute length 25 mm, over all length 75 mm, shank dia 6 mm, 4 fl , solid carbide end mill cutter 4 fluted sqr. end r. h. micro grain 30 deg. spiral rh cutting & centre c , solid carbide end mill cutter four fluted dia 20 mm x fl 45mm x oal 110mm x sd 20mm gr. hc tialn coat

CTN :45063494

01 Jun, 2026 NA

Bhawanipatna - Odisha

Tender For corrigendum : supply of cnc tools c c - shank twist drill- dia 8.2 , parallel shank twist drill- dia 8.3 , parallel shank twist drill- dia 8.4 , parallel shank twist drill- dia 8.5 , parallel shank twist drill- dia 8.6 , parallel shank twist drill- dia 8.8 , parallel shank twist drill- dia 9 , parallel shank twist drill- dia 9.4 , parallel shank twist drill- dia 9.5 , parallel shank twist drill- dia 9.6 , parallel shank twist drill- dia 9.7 , parallel shank twist drill- dia 9.8 , parallel shank twist drill- dia 9.9 , parallel shank twist drill- dia 10 , parallel shank twist drill- dia 10.1 , parallel shank twist drill- dia 10.2 , parallel shank twist drill- dia 10.5 , parallel shank twist drill- dia 10.6 , parallel shank twist drill- dia 10.8 , parallel shank twist drill- dia 10.9 , parallel shank twist drill- dia 11.4 , parallel shank twist drill- dia 11.5 , parallel shank twist drill- dia 11.8 , parallel shank twist drill- dia 12 , parallel shank twist drill- dia 12.2 , parallel shank twist drill- dia 12.4 , parallel shank twist drill- dia 12.5 , parallel shank twist drill- dia 12.6 , parallel shank twist drill- dia 12.8 , parallel shank twist drill- dia 12.9 , parallel shank twist drill- dia 13 , hss center drill- a3.15 x 8 , hss center drill- a2.5 x 6.3 , hss center drill- a4x10 , hss center drill- a5x12.5 , hss center drill- a6.3x16 , hss center drill- a2x5 , hand reamer- 4h7 , hand reamer- 5h7 , hand reamer- 6h7 , hand reamer- 8h7 , hand reamer- 10h7 , hand reamer- 12h7 , hand reamer- 14h7 , hand reamer- 16h7 , hand reamer- 20h7 , machine reamer- 16h7 , machine reamer- 18h7 , machine reamer- 20h7 , machine reamer- 3h7 , hand tap set- m4 x 0.7 , hand tap set- m5 x 0.8 , hand tap set- m6 x 1 , hand tap set- m8x1.25 , hand tap set- m10 x 1.50 , hand tap set- m12 x 1.75 , hss dies and die nut- m4 x 0.7 , hss dies and die nut- m5 x 0.8 , hss dies and die nut- m6 x 1 , hss dies and die nut- m8x1.25 , hss dies and die nut- m10 x 1.50 , hss dies and die nut- m12 x 1.75 , hss dies and die nut- m14 x 2 , hss dies and die nut- m16 x 2 , hss dies and die nut- m18 x 2.5 , hss dies and die nut- m20 x 2.5 , end mill cutter-solid carbide, dia - 3 , end mill cutter-solid carbide, dia - 4 , end mill cutter- solid carbide, dia - 5 , end mill cutter-solid carbide, dia - 6 , end mill cutter-solid carbide, dia - 8 , end mill cutter-solid carbide, dia - 10 , end mill cutter- solid carbide, dia - 12 , slot drill - solid carbide, dia - 5 , slot drill - solid carbide, dia - 6 , slot drill - solid carbide, dia - 8 , slot drill - solid carbide, dia - 10 , ball nose cutter-solid carbide, dia - 12 , ball nose cutter-solid carbide, dia - 10 , ball nose cutter-solid carbide, dia - 8 , ball nose cutter-solid carbide, dia - 6 , ball nose cutter-solid carbide, dia - 4 , chamfer end mill-solid carbide, dia - dia 10x90 degree , wood ruff cutter-hss, 19.5x6 , dove tail cutter-hss, 30x45 degree , lapping paste, 1 pkt - 400grm , round die handle - 1 inch , round die handle - 13 by 16 inch , round die handle - 1 and half inch , remear and tap handle - small , remear and tap handle - medium , remear and tap handle - large , dead blow hammer - 2lbs , oil stone triangular - 1 by 4 inch x 6 inch , parallal clamp - 6 inch , parallal clamp - 4 inch , dowel pin - dia 8x 50mm , dowel pin - dia 8x 100mm , dowel pin - dia 6x 45mm , dowel pin - dia 6x 30mm , dowel pin - dia 6x 50mm , toolmaker vice pin type - tmvp100 , goose neck clamp - ngc12 , //bid details 2 / 94 stepped strap clamp - nssc12-100 , moulding clamp- with clamping t-bolt and flanged nut - nmc-12t , step block - nsb-2 , adjustable supports plates - nasp-250 , single point cutting tool blank-hss - 1 by 2 inch x 1 by 2 inch x 6 inch , single point cutting tool blank-hss - 1 by 4 inch x 1 by 4 inch x 6 inch , face mill cutter - ygrd12-80z7c27b , face mill cutter - ygrd12-63z6c22b , face mill inserts - rdkt 12 04 mo

CTN :44938568

19 May, 2026 NA

Netanar - Chhattisgarh

Tender For corrigendum : supply of cnc milling and cutting tools e e - 1600432256 end mill cutter square end mil p40 10mm , 1600432255 end mill cutter square end mil p40 12mm , 1600432289 end mill cutter end mill carb p40 10mm , 1600432287 end mill cutter end mill carb p40 16mm , 1600432285 end mill cutter end mill carb p40 20mm , 1600432282 end mill cutter end mill carb p40 12mm , 1600432280 end mill cutter semilong end m p40 20mm , 1600432279 end mill cutter radius end mil p40 12mm , 1600432410 end mill cutter radius end mil p40 16mm , 1600432409 ball nose end mill cutter 12 22m 110 , 1600432408 ball nose end mill cutter 16 30m 140 , 1600432407 ball nose end mill cutter 20 38m 160 , 1600435314 face milling cutter 50mm steel 22m sk5 , 1600435313 face milling cutter 80mm steel 27 sk5 , 1600435312 face milling cutter 100m steel 32 sk5 , 1600435311 face milling cutter 125m steel 40m sk5 , 1600436656 insert sdmt1506pdrmh p40 or equival , 1600436655 insert tpkr2204pdr em tt p40 or equival ) /bid number : gem/2026/b/7452178 * /dated: 18-04-2026 & & / bid document 1 / 23

Central Government/Public Sector

CTN :44959012

19 May, 2026 NA

Kanpur - Uttar Pradesh

Tender For corrigendum : supply of aluminium rod dia 22 mm , bright bar rod dia 22 mm , flat ms , aluminium sheet - thickness 0.5mm , aluminium sheet - thickness 1 mm , acrilic rod dia 40 mm , derlin rod dia 40 mm , nylon rod dia 40 mm , brass rod dia 25 mm , copper rod dia 25mm , aluminium rod sq 40x40 mm , ms rod sq 40x40 mm , acrilic sheets 3 mm and 5 mm .4x8 feet , turning tool carbide , threading tool carbide , parting tool carbide , knurling tool dimond , central drill bs3 , power saw bladed bio metal , hss drill set 8.5 mm , hand saw blade bio metal 18 tpi , hss tap set , hss reamer , hss drill 9.8 , hss die set dia 10 , flat file rough and smooth , triangular file smooth and rough , oil can 100 ml , hand hexa frame , flate hammer 250 gm , centre punch , hss end mill cutter dia 12 mm , hss slab cutter m3 , hss slit saw cutter 03 mm , calculator , multimeter high range , cnc milling

Central Government/Public Sector

CTN :44008596

14 May, 2026 NA

Haridwar - Uttarakhand

Tender For bid to ras corrigendum : supply of tlmw62735063 carbide insert , tlmw62770250 right shoulder milling cutter , tlmw62744348 carbide insert(side) , tlmw62773186 indexable insert type finishing long egde milling cutter , tlmw62762486 indexable carbide insert shoulder face mill cutter , tlmw62762524 spare , tlmw62762532 allen key , tlmw62762494 bt 50 adaptor integral , tlmw62762508 carbide insert , tlmw62702920 insert screw , tlmw62738569 end mill cutter , tlmw62745263 10 mm d carbide insert(round) , , tlmw62776428 indexable insert face mill cutter , tlmw62789287 keys with round handle

CTN :45138827

28 May, 2026 NA

Barmer - Rajasthan

Tender For supply of s and f of ring main system for wss - supplying laying jointing commissioning and testing 100mm bore centrifugally cast spun ductile iron pressure pipe with spigot and socketed ends class k7 confirming to is 8329 or 2000 as per atc , supplying laying jointing commissioning and testing 150mm bore centrifugally cast spun ductile iron pressure pipe with spigot and socketed ends class k7 confirming to is 8329 or 2000 as per atc , supply and fix valve reflux with by pass arrangement 100mm 4 inches dia , supply and fix foot valve confirming to is 4038 100mm 4 inches dia , supply and fix valve sluice flanged of class 1 point 6pn 100mm 4 inches dia , supply and fix valves sluice flanged of class 1 point 6 pn 150mm 6 inches dia , supplying installing testing and comissioning of centrifugal pump electric driven capacity not less than 25 lps discharge at 60 metre head in load as per atc , supply laying testing cable xlpe insulated screened pvc bedded galvanized steel strip wire armd electric powercable hd 1100v grade stranded aluminium conductor size 70 sqmm 3 point 5 core , supply laying testing cable xlpe insulated screened pvc bedded galvanized steel strip wire armd electric powercable heavyduty 1100v grade stranded aluminium conductor size 10 sqmm 4 core , supplying installing testing and commissioning of outdoor type factory made crca sheet thickness 3 point 15mm platform mounted lt panel board to accommodate as per atc , supplying installing testing and commissioning of indoor type factory made crca sheet thickness 2mm platform mounted lt panel board to accommodate as per atc , supply install test commission centrifugal openwell submersible pump cap 10hp singlephase discharge range 740 to 200lpm head range 35 to 54m suction x discharge pipe dia 65x50mm as per atc , supply and fix cast iron air valves with two air outlets 80mm dia bore and fixing up in ) /bid number : gem/2026/b/7514655 * /dated: 08-05-2026 & & / bid document 1 / 21 & & ' ' /item category cast iron water supply mains , excavation in tranches not exc 1 point 5m wide n exc 1 point 5m depth over exc 10sqm on plan and n exc 1 point 5m in depth for foundations shafts wells cesspite mainholes pier holes as per atc , returning filling in including spreading laveling watering and well ramming in layers n exc 25cm in soft or loose soil complete all as specified and directed by engr in charge , removal of excavated soil material to a distance not exc 50m or depositing where directed at a level not exc 1 point 50 metre above th staring point complete all as specified as per atc , boring of hole under road pavement hardstanding by trenchless technology using ultra sounding technique nec machine incl hdpe pipe 150mm dia suitable for 0 point 4mpa working pressure , cutting existing ci or di pipe line of 150mm and inserting tee of size 150 x 150 x 150mm for taping complete all as specified and directed note tee 150 x 150 x 150mm paid separetly in di special , cutting existing ci or di pipe line of 150mm and inserting tee of size 150 x 150 x 100mm for taping complete all as specified and directed note tee 150 x 150 x 100mm paid separetly in di special , di or ci special such as tee bend collar tail piece and other fitting as required , earthing of poles and other machinery or equipment using 4mm gi wire as earthing lead and ms galvanized plate of size 60cm x 60cm x 6mm as earth electrode , demolition and diasmanttling of concrete in ground floor and pavings n exc 15cm thickness , m and l of cement concrete b 2 1 colon 2 colon 4 40mm graded aggregate 100mm thickness , m and l for contruction of brick masonry valve pit in repair of inter size 90x90x90cm incl nec exc earth work in soft or loose soil brick work plastering white wash pcc coping ms frame as per atc , m and l for contruction of brick masonry valve pit in repair of inter size 120x120x90cm incl nec exc earth work in soft or loose soil brick work plastering white wash pcc coping ms frame as per atc

Central Government And Public Sector

CTN :44687308

18 May, 2026 NA

Thane - Maharashtra

Tender For corrigendum : supply of demolition hammer for light duty chiseling in concrete and masonry suitable for wall and overhead structure , demolition hammer for heavy duty chiseling in concrete suitable for floor demolition , cordless hammer drill with wide drilling range, chipping function , cordless angle grinder with variable gear speed for cutting and grinding steel , cordless impact wrench which can be used for bolting steel , cordless reciprocating saw , electric concrete cutter , cordless led construction light with good battery life , concrete core drill machine which can be used for extraction of concrete cores , laser layout instrument , batteries for item numbers 3 4 5 6 8 battery should be of capacity 5ah , batteries for item numbers 3 4 5 6 8 battery should be of capacity 8ah , compatible fast chargers

End Mill Cutter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector