Latest end shield driving end Tenders | Government end shield driving end Tenders

Central Government / Public Sector

CTN :43534769

05 Feb, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of set of de and nde side modified end shield with inner and outer bearing cover suitable for 6306c3 bearing of od 72mm and width 19mm of m/s ranjan make sctmb motor of frame size 100l, protection ip 55 and material as per is-210 grade-220. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :43534832

06 Feb, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of set of de and nde side modified end shield with inner and outer bearing cover suitable for 6306/c3 bearing of od=72mm and width 19mm of m/s shil make sctmb motor of frame size 100l, protection ip-55 and material as per is-210 grade 220. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :43534833

06 Feb, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of set of de & nde side modified end shield with inner and outer bearing cover suitable for 6305/c3 bearing of od = 62 mm and width 17 mm of m/s shil make scmrb motor of frame size: 90l, protection ip - 55, material as per is-210 grade 220. [ warranty period: 30 months after the date of delivery ]

CTN :43428279

24 Jan, 2026 NA

Delhi - Delhi

Tender For procurement of riot control equipment - foldable baton, shield polycarbonate ballistic, shield polycarbonate non ballistic, canister for gas mask, helmet with visor and wire mesh/grill, body protection front & back with shoulder cover, elbow pad with arm guard, knee cap with shin guard

corporations/Associations/Others

CTN :43430340

19 Jan, 2026 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For erosion protection shield for re-heater tube, ltsh tube and economizer tube in boilererosion protection shield for re-heater tube, ltsh tube and economizer tube in boiler

CTN :43205945

13 Jan, 2026 NA

Chittorgarh - Rajasthan

Tender For corrigendum : tender for supply of make- ird mechanalysis limited , ird544m - vibration sensor , inductive velocity , top exit , mil 2-pin connector , 42.52mv/mm/s , 10 hz - 1 khz sku - m97120 , make- ird mechanalysis limited , stud for vibration sensor item no 1 , mounting/grub screws , 1/4 inch-28unf male , m6 x 1 male sku - stud-m6 provides connection between vibration sensor and mounting pad , m/s ird mechanalysis limited , vibration sensor mounting pad mild steel blackodized for ird544m (60x60x16 mm) with m6 thread for item no 1 tapped sku - ms-pad-ird544m , make- m/s ird mechanalysis limited , vibration sensor cable assembly for item no 1 , signal cable teflon 3.5mm dia , ss conduit 5mm id , 15 meter length straight , 2 pin ms , shielded , spade lugs at free end sku - m601015spade lugs at free end carry following colour code- red core- signal live , black core- signal ground , green core- signal shield , make- ird mechanalysis limited , eddy current pickup set comprising of probe , driver and connecting cable for 9 meter system. constituents. , make- m/s ird mechanalysis limited ird8800 rack , 8 position , 5u sku - m88008 this is the bin and will accomodate ird8800 cards , make- ird mechanalysis limited ird8800 (8800) , m88250 (88250) casing vibration module , 2ch velometer input (mv /mm/sec) and 1ch key phasor input , api standard 670 compliant sku - m88250-dc ird8800 series module m88250 can work with all types of velocity output vibration sensors that provide mv/mm/sec output - like ird531 (4 mv/mm/sec) and ird544m (42.52 mv/mm /sec) , make- m/s ird mechanalysis limited , ird8800 (8800) , m88900 (88900) - speed module , 2ch eddy current pickup input , api standard 670 compliant , input- 24 v dc , sku - m88900-dc , input- accelerometer and/or velometer , outputs-4-20 ma dc output proportional to full scale vibration rs-485 modbus rtu/tcp-ip output buffered output alarm relay contacts trip relay contacts full scale , alarm , trip , units , sensitivity and other parameters are programmable and password protected , make- ird mechanalysis limited , ird8800 (8800) , m88600 (88600) - eccentricity module , 2ch eddy current pickup input , api standard 670 compliant , input- 24 v dc , sku - m88600-dc input- accelerometer and/or velometer , outputs-4-20 ma dc output proportional to full scale vibration rs-485 modbus rtu/tcpip output buffered output alarm relay contacts trip relay contacts full scale , alarm , trip , units , sensitivity and other parameters are programmable and password protected , make- ird mechanalysis limited , 35 mm din rail mount industrial grade power supply , 480 w , product- rps480 , 24 v dc output , dimension- 60 x 154 x 158.55 mm (w x h x d) , weight- 1050 gms , sku - rps480-24-ce supports 90 - 264 vac / 127 - 370 vdc power factor more than 0.95 full load over entire input range protection against short circuit , overload , overvoltage & over temperature cooling by free air convection ul 508 approved (e522848) efficiencies up to 93 % dc ok relay contact , make- ird mechanalysis limited , cabinet 1500 x 600 x 600 in mm , ip32 sku - cabinet-1500-600-600-ip32 , installation commissioning and calibration check of all supply sensor with unit at site

CTN :43433109

19 Jan, 2026 NA

Chennai - Tamil Nadu

Tender For erosion protection shield for re-heater tube, ltsh tube and economizer tube in boiler

State Government

CTN :43139336

16 Jan, 2026 4.34 Lacs

Multi City - Telangana

Tender For corrigendum : supply of safety items - gloves rubber acid proof 16 inch gloves should be resistant for highly concentrated acid and bases., goggle, chemical splash protective goggles should be resistant for highly concentrated acid and bases., chemical protection suit, this suit must cover all the body size: xxl, protection coverall suit must be resistant for highly concentrated acid and bases., acid gases e2 cannister (en 148-1 class 2), gum boots size 10 inch gum boots must be resistant for highly concentrated acid and bases., self-contained breathing apparatus (complete kit including cylinder), self contained open circuit automatic positive pressure compressed air breathing apparatus set confirming to en137:2006 type 2 and cbrn approved, with 6.8 liters/300 bar aluminum lined fully wrapped carbon composite material compressed air cylinders approved to en 12245 and ce marked, as per following specifications., complete specifications are attached in a separate sheet., copy of following approvals shall be attached with bid., scba set: ce marked, en 137: 2006 type 2 approval and cbrn approval., facemask: en 136: class 3, cylinder: ce marked en 12245 and ccoe approved, cylinder valve: en 144 approved, venus v-44 + ffp1s fold flat mask, gloves, size:14 inch, material: asbestos gloves must be with high quality material and should be durable., apron suitable to handle sulphuric acid (h2so4), apron should be with long sleeves and bottom up to knee., size: xxl apron should be resistant for highly concentrated acid and bases., face shield, the face shields must be resistant for highly concentrated acids and bases.

State Government

CTN :43413409

22 Jan, 2026 4.38 Lacs

Korba - Chhattisgarh

Tender For supply of ss half round straight protection shield with 02 nos. u- clamps for hp boiler tubes of size 63.5 mm od, as per drawing no. se/mmii/bmd-ii/kw/353 of 210 mw abl boilers of unit no. 3&4, htps, korba west.

CTN :43380005

20 Jan, 2026 NA

Mumbai - Maharashtra

Tender For tender for supply of 25bz6c001 primary and secondary switchboard d d -rail 12 modules hl105 , rail 22 module hl105 , module hl105 9x2 contacts awg20 , module hl105 3x6 contacts awg20 , module hl105 1x10 contacts awg16 , fan 28vdc 23w , voltage transformer 3ph 115 24.5v 60hz 1.5kva , voltage transformer 3ph 115 24.5v 60hz 1kva , diode terminal block with 1n4007 , relay 2rt 2a 28vcc p , relay 2rt 2a 28vcc p , relay 2rt 2a 28vdc with suppressed device , relay 2rt 10a 28vcc , timer on operate 28vdc 5-100 sec , isom , torus d80mm , specification ci shunt , connector sup 6 slot , module 4 di pnp 2 3 4 connections 24 v dc , simatic dp , 5 universal terminal modules tm-e15c26-a1 , 5 shield connecting elements terminal modules tm-p and tm-e , fus 1a type ha22 , feeder terminal to 25sqmm for 10x3mm and 6x6mm n-busbar , bla , soldered base 2rt 2a 28vcc (p) , base weld , dc circuit breaker nsx630 mp3 without socle , voltmeter 72x72 250% cl 1.5-0 600vdc , frequency meter 72x72 250 cl 1.5 55 65hz , meter phase 72x72 250 cl 1.5 cph t3fe-0.5 cap 0.2 ind , voltmeter 72x72 250% cl 1.5-0 150vdc , ac circuit breaker nsx250 without socle , ac circuit breaker nsx250 without socle , analog threshold detector mcr-sws u 0-10v , fus 0 , 63a rapide 6.3x32 ha37 , numeric indicator , card 1 2atr 12 relais 2rt 2a 28vdc , douille type 40r , fus 1 , 6a 6.3x32 ha37 , fuse 14x51 690v 60hz 6a gc , isolator m8 , head pb d22 green , push button 2f black , switch 4 positions 2 stages , switch 4 pistons 2 stage , switch 2 positions 8 stages , thermal protection td04 , switch 2 pos , switch 2 pistons 6 stage , voltmeter switch , nsx630-mn coil , dc circuit breaker nsx250 tm125 without socle , fuse holder 14x51 type cms142 2p 440v 60hz 16 am , current tranformer 500 5a 10va cl-0-5 , current tranformer 500 5a 10va cl-0-5 , crimp base 1rt 25a 28vcc p , fuse holder 14x51 type cms143 3p , spare part to replace all of the varistors in a motor rack , rectifier diode modules 100a , mechanical push button red , fus 8a am 14-8mr 690v 6% , fuse 14x51 690v 60hz 2a gg , signal lamp unit d16 28vdc blue , signal lamp unit d16 28vdc white , fus 2 , 5a type ha22

End Shield Driving End Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector

corporations/Associations/Others

State Government

State Government