Latest engraving service Tenders | Government engraving service Tenders

State Government

CTN :40164578

05 May, 2025 NA

Bardhaman - West Bengal

Tender For quotation for metal platform for surgeon and metal platform for surgeon

State Government

CTN :40212640

08 May, 2025 12.58 Lacs

Deoghar - Jharkhand

Tender For renovation work of h/r gates and their hoisting system, metal seal, rubber seal etc. located at various chain number of left main canal of mayurakshi reservoir scheme along with installation of checker plate and railing in hoisting platform

State Government

CTN :40212642

08 May, 2025 28.67 Lacs

Deoghar - Jharkhand

Tender For renovation work of platform shed along with left and right outlet gates and their hoisting system, imbedding, metal seal, rubber seal etc. situated at head works of diggal pahadi reservoir scheme

State Government

CTN :40203787

16 May, 2025 12.03 Lacs

Multi City - Karnataka

Tender For servicing, overhauling and testing of miv servo motor ke arrangements for scaffolding if necessary,replacement of piston seal (upper side & down side), shaft seal (top side), cylinder case o rings (upper case and lower case),servicing,overhauling and testing of miv servo motor (includes replacement of accessories like seals, piston head, piston rod, fasteners, gaskets, o rings brackets &etc),machining, honing and plating polishing of servo motor cylinder & shaft if required,machining of servomotor shaft if required,machining of piston of servomotor if required,assembling of both the servo motors, after completion of servicing and overhauling,operation of serviced/overhauled miv servomotor in front of kpcl engineers in-charge, locking of bfv before dismantling of servo motor and unlocking after completion of work as a safety measure,transportation charges if required.replacement of trunnion seal of main inlet valve at counter weight side.making required plat form for dismantling work of trunion seal,dismantling of miv counter weight and other related parts to replace trunion seal,disconnecting miv servomotor assembly and other related parts from miv to replace trunnion seal,removing and inspection of old trunion seals,replacing old trunion seals by new one,applying of metal putty for shaft, if required only,testing for any water leakages near miv, if there is no leakage then go for final assembly.re-assembling of dismantled parts and assemblies,supply of one set trunion seal on servo motor side,testing & commissioning,removing of any platform made for dismantling works.

State Government

CTN :40164585

05 May, 2025 NA

Bardhaman - West Bengal

Tender For quotation for metal platform for surgeon for lap and metal platform for surgeon for general ot

State Government

CTN :40154816

09 May, 2025 NA

Chhindwara - Madhya Pradesh

Tender For supply of fencing material for plantation sites - fencing material -, galvanized steel barbed wire- mesh wire - galvanised steel wire of 2.5 mm diameterpoint wire - galvanised steel wire of 2.5mm diameterbarbs - sistance between two boards 75mmm, the barbs shall have four points and shall be formed by twisting two point wires each two turns. tightly around both the line wires making altogether four complete turns.standard - conforming to is-278-2009, galvanised steel chain link fence- mesh wire - galvanised steel wire of 3.15 mm diameterfabric size - 100x100 mm height - 150 cm, line wire - 2 numbers of line wires of 4.00 mm diameterstandard - conforming to is-2721-2003, with up to date amendments, rcc fencing poles height 2.0 mtype - straight, length - 2.00 m, dimensions - bottom 10x10 cm square, top 8x8 cm squarecement concrete mix - cement, sand and metal ration 1:2:4, with 12.5 nominal size coarse aggregate, sand used should be free from clay and salt. concrete mix shall be conforming to grade m-15 of is:456:2000reinforcement - 4 round vertical bars of 6 mm diameter, 11 no of stirrups of 6 mm diameter round ms bars 20 cm centre to centre. hooks - 5 no. bottom hook should be provided 60 cm above the bottom of the pole, second at 82.5 cm, third hook at 112.5 cm, fourth hook at 150 cm, top and fifth hook at 195 cm from bottom.manufacturing - in order to ensure desired compressive strength, rcc fencing poles should be compacted with the help of platform vibrators. surface should be uniform and free from voids. the concrete cover over the reinforcement should not be less than 1.5 cm.

CTN :40133943

01 May, 2025 2.89 Lacs

Hisar - Haryana

Tender For mayyar, hisar1, supplying and installation of gym equipment (mp) (rt) - mayyar, hisar1, supplying and installation of gym equipment (mp), multy gym six station (leg pull, leg curl with leg extension, biceps with trlceps, pec dee fly):-consists of 4 weighted stations and z light stations: and it is omhinalion of 8 type of excerslce thls is macle up of mainly olympic rectangular pipe of 4 x2 with 2.15mm thickness with steel twisted wire with pvc/nyioncoated cable5mm-6mm: with pvc coated weight plates for noiseless working/ movements, weight plates stack moves/slides in stainless steel pipes for smooth and noiseless movement throughout lifespan of equipments, ball bearing mouted fibre/pvcpullys, heavy ct shion padding on 12mm plys with special non abrasive fabric nontearing tauric.each weight stackis 7skg sheavy., functional trainer mechine :-all pipes made up size 2 x4 of hot rolled hollow rectangular ms pipe with size 193x100x230 cm and powder coated using akzo nobel or equivalent of 80-120 micron thick. all welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars are to be provided with high quality grip rubber. padals shall be made up of nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and u v resistant environmental friendly. bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by engineer-in-charge. equipment to be fitted within built limiters to prevent unwanted movements. all open ends of pipe to be coloured by gi/lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m25 and j shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc., superior olympic bench incline :-(made up of mainly olympic rectangular pipe of 4 x2 approx.:more nearest to approx. 163x165x137 cm with 2.15mm thickness, heavy cushion padding on 12mm plys with special non abrasive fabric non tearing fabric. with two vertical pipes have clamp forresting rodonit,used for doing incline level pattern chest press at one fixed incline level)., heavy olympic weight plates stand/rack in tree shape :-(made up of mainly olympic rectangular pipe of 4 x2 approx.:more nearest to approx.96x63x120 cm with 2.15mm thickness, with 6 round pipes welded { 3 pipes on each side}on which weigh plates are hanged/holded), heavy dumbells stand/rackin double platform :-(made up of mainly olympic rectangular pipe of 4 x2 approx.:more nearest to approx.209x81x83 cm with 2.15mm thickness, with angleiron welded with flat patti with rubber pasted on which dumbbell srestonit,two platform/ shelves), dumble 250 kg. (20,15,10,5,2.5)made from high quality rubber.tear proof, soundless and bouncy effect., plates 250kg (20,15,10,5,2.5)made from high quality rubber.tear proof, soundless and bouncy effect, rods 7f/3 and 3f/2 =27f, rod stand, providing and designing and fixing leg press size 153x137x152cm fabricated with 2`x4` recangular hollow pipe complete all respect., arm wheel: providing ,designing and fixing arm wheel in a pair of size 850x800x1800 mm, superior olympic bench flat: ( made up of mainly olympic rectangular pipe of 4`x2` approximate : more nearst to approx. 170x 168x137 cm with 2.15 mm thickness,heavy cusion pedding on 12 mm plys with special non-abresive fabrc etc., superior olympic bench decline:-made up of mainly olympic retangular pipe of 4`x2` approx.: more nearest to 210x166x137 cm with 2.15 mm thickness etc., spare flat bench for dumbbell

CTN :40130568

13 May, 2025 20.00 Lacs

Sehore - Madhya Pradesh

Tender For tender for inviting rates for tent materials with providing and fixing for the year 2025-26 under municipal council budni. (2nd call) - jmp.s.c.p.chhattisgarh iit-jee 2025.26a german hanger, back drop, stage platform, state platform ii, stage platform iii, media platform, ramp, tent pipe pandal, water proof tent, curtains, green room, baseball carpet, flower decoration, steel railing, aca, vip chairs, vip sofas, dawa chairs, center table, lecture stand, chair fiber, led screens, generator with diesel, ceiling fans, big gates, led par lights, led. light 200 watt, linear sound complete, balloon decoration, table complete bed sheet, frill, chair cover, mike set, glasses, glass stand, service table, series led, strip led, bassable carpet, metal light, halogen, gate, stage decoration louds, jaali gate, mixer, sound box, mattresses, quilts, ceiling fans, small cooler, big cooler, carpet, green mat

Co-operative

CTN :40130234

08 May, 2025 NA

Vidisha - Madhya Pradesh

Tender For supply of items to bpacs - , 100 capacity 100 kg, 500x500 mm m.s. checkred top platform, heavy duty structure, ss load cell en 24 grade, green display with battery back up facility. ( ), -8 in 1 grain moisture meter parmeters: measuring range: 5% to 30% noisture, lempralure- 10c 60e maximum moisture.t- (1%rh +0.5). resolution: 0.5% moisture temprature0.1c/ 0.1f operating environment: temperature 0 c -40 ci bumidity (0-85% rh grain varicties to choose grain moisture test grain temperature test grain moisture standard setting and excessive moisture prompt backlight control function celsius, fahrenheit temperature unit conversion battery hold function automatic shut down without any operation for 5 minutes. ( ), - double needle. double thread, shosprof handle, self lubricated, 1/10 hp 8000 rpm 220 volt ac/dc motor ( ), 01 2000 [ 220 , 170 ] ( ), faq , pp faq , faq , pp faq , 3 x 4 thickness 500 micron ( ), 12 ( ), 4x6 with 20 guage wire mash 40 x 40 x 5 mm angle frame and stand with mid support 25 x 5 mm ms flate( ), [ ] 450 mm , rpm 1400 , 370 watt , 220 volt double ball bearing copper winding , metal body( ), 18 x 18 [ screen printing ] ( ), 18 x 18 / ] - ] isi ( ), 20 x 30 [120 gsm ] multi layered cross laminated polythene film dunnage sheet [is 14611 -2016 ] with up to date amendments, mass per unit 120 gm/m2+10% (mn type) weight 6.7kg+10%. ( )

CTN :40002723

27 Apr, 2025 NA

Pune - Maharashtra

Tender For corrigendum : civil maintenance & upkeepment of various civil assets at 220kv theur s/stn dist-pune.civil maintenance and upkeepment of control room at 220 kv kurkumbh s/stn dist-pune.construction of parking shed & allied civil maintenance works at 132 kv alegaon, tal-daund, dist-pune.civil maintenance and upkeepment of various civil works at 132 kv janai s/stn dist-pune.metal spreding & civil maintenance and upkeepment of switchyard and control room at 132 kv indapur s/stn tal-indpur, dist-pune.civil maintenance & upkeement of various civil assets in 132 kv switchyard at 132/33 kv switchyard at 132 kv someshwar dist-pune.civil maintenance of control room & switchyard premises at 132 kv bawada substation tal-indapur, dist-pune.civil maintenance & upkeepment of store shed & other miscellaneous work at line maintenance s/dn. chinchwad, dist-pune.renovation of control room and renovation of toilet block with new draniage arrangement at 132 kv shirur substation, dist-pune.renovation of 22kv control room at lonikand, and renovation of toilet block , watchman cabin and asphalting of road at tpt store premises at lonikand substation, dist puneprovision of stacking platform for spare equipment's and for provision of watchman cabin near 220 kv switchyard of 400kv rs o&m division lonikand-i dist-pune.work of water pipeline & leakage, earthing pipeline and switchyard metal spreading at 132kv kavthemai substation, dist-pune.work of metal spreading and earthing pipeline of switchyard at 132 kv essar s/stn dist-pune.work of renovation of control room and toilet block with new draniage arrangement at 132 kv kuruli s/stn dist-pune.civil maintenance and upkeepment of various civil assets at bhosari colony, dist.- pune.providing office furniture to construction circle of msetcl located at 3rd floor of administrative building rasta peth, pune.civil maintenance and upkeepmenmt of various civil assets at 220 kv alephata s/s, dist.-pune.constrcution of gabian wall alongwith compound wall of 22 m at 400 kv jejuri s/s, dist.-pune.proposal for up-gradation of computers & printers for ehv cccm division pune

Engraving Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

State Government

Co-operative