Latest epdm sheet Tenders | Government epdm sheet Tenders

Central Government / Public Sector

CTN :45388425

18 Jun, 2026 NA

Jagatsinghapur - Odisha

Tender For corrigendum : supply of flowserve make control valve spares c c - assy, sliding seal, actuator, size 100/200, rotary, 4 stroke, backup ring, 15.50 od, dash #459, bearing, 1.25 stem, vldsk2, 2.50 l, metal, bearing, thrust, maxflo 4/3, 1"/1.50"/2", cl 150/600, bearing, thrust, maxflo 4/3, 3"/4", cl 150/600, bearing, shaft, maxflo 4/3, 1.50/2", cl 150/600, bearing, post, abd, 1.02 stem, maxflo 4/3, 3"/4", bearing, post, abd, maxflo 4/3, 1.50/2", cl 150/600, bearing, shaft, 1.18 stem, maxflo 4/3a, 3/4", dwgrev: 00; bearing, 0.75 stem, vldsk2, 1.63 l,, disk, vldsk2, 4", cl 150/300, disk, vldsk2, 10", cl 150/300, dwgrev: 00;kit, spare part, actuator, size 50, dwgrev: 00; kit, spare part, actuator, size 50, dwgrev: 00;kit, spare part, actuator, size 25, rotary, end post, maxflo 4/3a, 1.50/2", cl 150/600, 2 piece, press fit, 2 bolt, eco 16239, eco 16523, 18883, post assy, p, end post, maxflo 4/3a, 3/4", cl 150/600, 2 piece, press fit,, gasket, elastomer, 2.12 x 1.50, 0.06 thick, gasket, ptfe, 1.55 x 1.14, 0.12 thick, gasket, spiral, 11.12 x 10.38, 0.18 thick, gasket, spiral, 12.00 x 11.25, 0.18 thick, gasket, maxflo 4/3, 37mm x 27mm, 3.50mm thick, gasket, maxflo 4/3, 57mm x 45mm, 3.50mm thick, gasket, maxflo 4/3, 24mm x 18mm, 3.50mm thick, graphite, gasket, maxflo 4/3, 40mm x 30mm, 3.50mm thick, gasket, ptfe, 5.94 od, 5.38 id, .15 thick, gasket, ptfe, 5.345 od, 4.905 id, 0.094 thick, kit, shim, maxflo 3, 2", 150/300, kit, shim, maxflo 3, 3", 150/300, o-ring, dash #024, eco 15655, rubber, buna-n, o-ring, dash #459, eco 15655, rubber, buna-n, o-ring, dash #914, 1.28 dia, 0.12 wall, o-ring, dash #275, o-ring,, dash #159, packing set, twin, sureguard, packing set, twin, square, 1.25 stem, 1.75 od, vldsk2, packing set, single, sureguard xt, maxflo, 3"/4", packing set, twin, sureguard xt, maxflo, 1.50/2", plastic, pin, 3 deg taper, vldsk2, 4", cl 150/300, pin, taper, vldsk2, 10", cl 150/300, plug, maxflo 3, 2", cl 150/300, plug, maxflo 4/3, 3", cl 150/600, seal, grafoil, ribbon, 40" l, seat ret, maxflo 3, 2", cl 150/300, seat ret, maxflo 3, 3", cl 150/300, seat ret, vldsk2, 4", cl 150/300, seat ret, vldsk2, 10", cl 150/300, seat ring, maxflo 3, 2", cl 150/300, seat ring, maxflo 3, 3", cl 150/300, seat ring, maxflo 3, 3", cl 150/300, seat ring, vldsk2, 4", cl 150/300, seat ring, vldsk2, 10", cl 150/300, shaft, maxflo 4/3, 1.50/2", cl 150/600, shaft, maxflo 4/3, 3"/4", cl 150/600, shaft, vldsk2, extd, 4", cl 150/300, shaft, vldsk2, 10", cl 300, flowserve/logix 500 md+(520md+37-w1d300-000-0000), 3200md-28-d6-e-04-40-05-00, valtek lin.act., 25 sq.in with logix500 (actuator set), bare vlv sub asmbly 2",300w, maxflo 3, bare vlv sub asmbly 3",300w, maxflo 3, bare vlv sub asmbly 1.5" 300#, maxflo 3, bare vlv asmbly,p/n:817774.009,flowserve, bgl sphtm;dwgrev: 00;kit, spare part, actuator, size 50, rotary, hd spring, 3.25 stroke, mtl code n/a: se, dwgrev 000-ring, dash #237, rubber, viton a, 75/-5 durometer, indefinite shelf life purchase an, dwgrev 00bearing, thrust, 1.00 stem, shrstrm, 6/8, a or sa-479-521800, nitronic 60 bar 8-inch centerless gro, dwgrev 000-ring, dash #257, rubber, viton a, 75/-5 durometer, indefinite shelf life purchase an, dwgrev 01seat ring, shrstrm, 6, cl 150/600, inconel 625, work hardened to minimum tensile strength of 195 k, bgl me_fgdwgrev 04bearing, 1.12 stem, shrstrm, 2.00 l, metal, stellite #6 casting r30006 or wrought stellit, dwgrev 01pin, grooved, 0.19 dia, 0.50 l, a or sa-479-520910 xm-19 nitronic 50 strain hardened, up to 2.25 dia, dwgrev 000-ring, ...., dash #244, rubber, viton a, 75/- 5 durometer, indefinite shelf life purchase an, dwgrev 01seat ring, shrstrm, 3, cl 150/300, inconel 625, work hardened to minimum tensile strength of 195 k, ;dwgrev: 00; kit, spare part, actuator, size 200, rotary, 4 stroke, vr, mti code n/a: see drawing, p.o., or bo, dwgrev 00gasket, spiral, 1.44 x 1.06, 0.12 thick, gasket, spiral wound 316l windings, flexible graphite filler in, dwgrev 000-ring, .., dash #033, rubber, viton a, 75

State Government

CTN :45510359

24 Jun, 2026 16.69 Lacs

Ahmedabad - Gujarat

Tender For replacement of wire rope with rope clamp by new one in total 3 no`s automatic gate and locking of 3 no`s automatic gate, providing and fitting rubber sheet support below steel type counter weight in total 27 nos gate, repairing work of guide track and track plate in total 27 nos automatic gate. fabrication, supplying and erection work of new entrance gate on both entrance and exit side of dam in order to allow authorized person to enter on dam gate and fabrication, supplying and erection work of railing with entrance gate on r.b.h.r gate and other miscellaneous repairing work of automatic gates of size 36` x 05`- 47 nos and h.r. gates of ranghola irr. scheme. as per the drawings, specifications and instructions of the engineer-in-charge. (dist- bhavnagar)

State Government

CTN :45534604

15 Jun, 2026 NA

Kurukshetra - Haryana

Tender For kheri markanda block: thanesar panchayat: kheri markanda dist.: kurukshetra annual maintenance work for water supply. - repair and rectification of w/s leakages found in ac pipe c-15 including excavation, bailing out of water providing and fixing of ci detachable joints c-15 suitable for ac pressure pipe marked with is : 8794 for use with ac pipes complete with 2 no. rubber ring marked with is:5382 & is:10292 and appropriate no. of nuts and bolts marked with is 1363 including carriage in all respect and including cost of ac pressure pipe c15 as per is: 1592 & 2003 complete in all respect to the satisfaction of the engineer-in-charge /ac 100 mm pipe class-15 / at site rural area

State Government

CTN :45534607

15 Jun, 2026 NA

Kurukshetra - Haryana

Tender For bagthala block: thanesar panchayat: bagthala dist.: kurukshetra annual maintenance work for water supply - repair and rectification of w/s leakages found in ac pipe c-15 including excavation, bailing out of water providing and fixing of ci detachable joints c-15 suitable for ac pressure pipe marked with is : 8794 for use with ac pipes complete with 2 no. rubber ring marked with is:5382 & is:10292 and appropriate no. of nuts and bolts marked with is 1363 including carriage in all respect and including cost of ac pressure pipe c15 as per is: 1592 & 2003 complete in all respect to the satisfaction of the engineer-in-charge /ac 80 mm pipe class-15 / rural areas in various villages

State Government

CTN :45534864

15 Jun, 2026 NA

Rohtak - Haryana

Tender For rohtak town annual maintenance works for water supply - repair / rectification of w/s leakages found in ci/di pipes including excavation, bailing out of water providing and fixing of ci detachable joints c-15 suitable for ci/di pipe marked with is : 8794 for use with ci/di pipes complete with 2 no. rubber ring marked with is:5382 & is:10292 and appropriate no. of nuts and bolts marked with is 1363 including carriage in all respect and including cost of ci/di pressure pipe as per is: 1536 complete in all respect to the satisfaction of the engineer-incharge /ci/di 150 mm i/d pipe / job work for repair of leakage in 6" i/d pipeline including cost of dismantling of cc road, excavation, cutting, bailing out water, jointing with 2 nos. cid joint 6" i/d testing, refilling at village bohar bhoan and milwan for the month of 02/2026

State Government

CTN :45534867

15 Jun, 2026 NA

Rohtak - Haryana

Tender For rohtak town annual maintenance works for water supply - 50 hp horizontal motor rewinding copper wire, scrap with old copper wire and motor spare part / ex. post facto sanction of job work for rewinding of 50hp raw water motor with timer st-100 l & t make, wiring 4mm core cable 3 phase havells make glain, rubber jain 8" and grease including labour charges, carriage charges at catch pit area 1st water works in rohtak town

State Government

CTN :45534917

15 Jun, 2026 NA

Rohtak - Haryana

Tender For rohtak town annual maintenance works for water supply - repair of 200mm sluice valve including making m.s spendle, g.m. chuck nut, new chimta, nut bolt, rubber jain, glain dori, grease sluice valve opening and fitting at site, carriage charges from site to work shop and work shop to site including labour charge complete as per specification of engineer- in-charge complete in all respect, /200 mm sluice valves repair / ex. post facto sanction of repair of 8" s/v 2 nos. at gohana adda b/s 1st w/w in rohtak town

State Government

CTN :45534572

15 Jun, 2026 NA

Rohtak - Haryana

Tender For rohtak town annual maintenance works for water supply. - providing and fixing of sluice valve marked with 1.6 p.n. 150mm including the cost of nut bolts, rubber and work for repair of leakage in 6" i/d pipeline including cost of dismantling of cc road, excavation, cutting, bailing out water, jointing with 2 nos. cid joint 6" i/d testing, refilling

State Government

CTN :45523042

12 Jun, 2026 20.99 Lacs

Patna - Bihar

Tender For annual maintenance (oiling & greasing), overhauling , p.c.c.work, platform, rubber seal, vent cleaning, painting, partial civil work and hoisting system etc. of anti flood sluice gate situated at simariya - gorgama embankment under flood control division, bounsi (banka) . and running of mechanical ambulance during flood period .

State Government

CTN :45528543

03 Jul, 2026 NA

Gandhinagar - Gujarat

Tender For work of providing new rubber lagging on different pulleys of chp- i & ii by vulcanizing process on as & when required basis at gtps, gandhinagar

Epdm Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors