Latest epoxy coating Tenders | Government epoxy coating Tenders

CTN :40886755

18 Jul, 2025 NA

Sonitpur - Assam

Tender For supply of kevlar sheet 7k , press system , epoxy coating , clear coat , infusion pump assy

State Government

CTN :40732676

07 Jul, 2025 18.58 Lacs

East Nimar - Madhya Pradesh

Tender For corrigendum : work contract for anti-corrosive, anti-erosion, anti-abrasive polymeric epoxy coating on surface of condenser tube sheet and water box installed at unit-4, 2x660 mw, sstpp,mppgcl,dongalia.

corporations/Associations/Others

CTN :40848245

07 Jul, 2025 NA

Panvel - Maharashtra

Tender For regarding approving the rates of open gym materials for the year 2025-2026, 2026-2027 and 2027-2028 for 3 years as per requirement of panvel municipal corporation - forearm twirlproduct area : 1.5m x 0.8m (5ft x 2.6ft) safe play area : 2.5m x 1.8m (8.2ft x 5.9ft) ideal for : 13 years & above function: strengthens shoulders & forearms improves wrist agility.technical specification: post dia: 80nb gi main vertical support pipe of shoulder builder is fixed over 10mm thick base plate. 10mm thick clamping plates are attached to main frameto hold the rest assemblies wheel structure: 25nb galvanized pipe bend to form ring of wheel and spokes are made up of 15nb g.i. pipes that connect to each other to form a wheel of shoulder twirl. nylon knobs are provided on the wheels for gripping purpose. this wheel is fixed to main support with the help of 40nb connector pipe with specially designed bearing housing. pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 (part 1) with gi thickness of 60micron. pipe materials or class: medium duty (b class) and heavy duty (c class) series of pipes only.wall thickness of pipe varies according to class/series of pipe used. powder coating:it shall be done with pure polyester raw material.dry film thickness maintained within the range of 50-70 microns.it is tested for adhesion test (according to astm-d-3359) with, abs board product area : 1.6m x 0.8m (5.2ft x 2.6ft) safe play area : 2.6m x 1.8m (5ft x 5.9ft) ideal for : 13 years & abovefunction: strengthens shoulders & forearms improves wrist agility.technical specification: main structure: the abs board shall be having ergonometric design with main support of 50nb pipe. galvanized round pipe having 50nb with pipe rectangular 50 x 25 x 3 mm to be welded to the main support frame. backrest: backrest sheet having 3mm thick to be made from frp materails pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 (part 1) with gi thickness of 60micron. pipe materials or class: medium duty (b class) and heavy duty (c class) series of pipes only.wall thickness of pipe varies according to class/series of pipe used. frp products: it is made up of fiber reinforced plastic(frp) process. it is made up of 3-4 mm thick fiber reinforced plastic. the frp material is tested for abrasion resistance & uts(ultimate tensile test) powder coating:it shall be done with pure polyester raw material.dry film thickness maintained within the range of 50-70 microns.it is tested for adhesion test (according to astm-d-3359) with the help of cross hatch cutter instruments. nut and bolts: galvanized/ s.s./allen bolt/button head allen bolt & nuts / nylon lock nuts are used with pvc bolt caps.all open ends of pipe been closed by gi / pvc caps for user safety against entrapment., aerial stoller product area : 1m x 0.5m (5ft x 2.6ft) safe play area : 2m x 1.5m (6.6ft x 5ft) ideal for : 13 years & abovefunction: strengthens leg muscles. lower body workouttechnical specification: post dia: the aerial stroller having ergonomic design with 80nb gi main vertical support pipe of aerial stroller is fixed over 10mm thick base plate.\ clamping plates are attached to main frame to hold the rest of assemblies. footrest and handles: footrest bend and handle having 40nb and 25nb dia galvanized pipe respectively.the materials used for foorest are aluminum/nylon/lldpe/hdpe specially designed mounting flange assembly having circular flange of 130mm dia with 16mm thickness is provided for footrest assembly. pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 (part 1) with gi thickness of 60micron. pipe materials or class: medium duty (b class) and heavy duty (c class) series of pipes only.wall thickness of pipe varies according to class/series of pipe used. powder coating:it shall be done with pure polyester raw material.dry film thickness maintained within the range of 50-70 microns.it is tested for adhesion test

State Government

CTN :40877587

10 Jul, 2025 4.00 Lacs

Kothamangalam - Kerala

Tender For supply and installation of gym equipments for varappetty gp ponnattu chira - open gymnesium equipments in varappetty gp ponnattu chira, air walker single(air walker made from c class gi pipe(is 1239(part1):2004) . closing caps are made up of low linear density poly-ethylene (lldpe) material with injection moulding. the powder coat should be poly urethane & epoxy powder with 60 to 70micron thickness. dimensions: - 1800mm (length) x 600mm (width) x 1550mm (height) ), sit up board double(sit up board made from c class gi pipe to be use by two persons at one time. closing caps are made up of low linear density poly-ethylene (lldpe) material with injection moulding. the powder coat should be poly urethane & epoxy powder with 60 to 70micron thickness. dimensions: - 2000mm (length) x 1100mm (width) x 650mm (height)., double twister /twister 2 in 1(double twister made from c class gi pipe (is 1239(part1) :2004)to be used by two persons at one time. double twister (dimensions: - 850mm (length) x 660mm (width) x 1100mm. (height). safe area: - 3 mtr x 1mtr. the m.s. round plate is welded at bottom. the twister plate fitted on the standing frame is made up of m.s. round plate. closing caps made from top quality fiber reinforced plastic material. the bearings used are of 6205zz permanent lubricated sealed bearing of reputed brand. the powder coat should be poly urethane & epoxy powder with 60 to 70micron thickness., sky walker(user weight 120 kg,length 1800 millimeterwidth 600millimeterheight1550 millimeter, made from c class gi pipe(is 1239(part1):2004). the powder coat is done by poly urethane & epoxy powder with 60 to 70micron thickness. closing caps are made up of low linear density poly-ethylene (lldpe) material with injection moulding. ), hip flexore( hip flexore made from c class gi pipe(is 1239(part1) :2004)to be used by two persons at one time. closing caps are made up of low linear density poly-ethylene (lldpe) material with injection moulding. the powder coat is done by poly urethane & epoxy powder with 60 to 70micron thickness.dimensions: - 1290mm (length) x 1065mm (width) x 650mm (height)., weight lift with bench(weight lift made from c class gi pipe(is 1239(part1) :2004)to be use by two persons at one time. closing caps are made up of low linear density poly-ethylene (lldpe) material with injection moulding. the powder coat should be poly urethane & epoxy powder with 60 to 70micron thickness.dimensions: - 1200mm (length) x 1200mm (width) x 1750mm (height). bench with fixed weight lift ecquipment made up of c class gi pipe.), shoulder builder two wheel(shoulder builder made from c class g.i pipe(is 1239(part1).closing caps are made up of low linear density poly-ethylene (lldpe) material with injection moulding. the powder coat should be poly urethane & epoxy powder with 60 to 70micron thickness dimension 900mmlx900mmwx1580mmh.), fully body twister(fully body twister c class g.i pipe(is 1239(part1):2004).closing caps are made up of low linear density poly-ethylene (lldpe) material with injection moulding. the powder coat should be poly urethane & epoxy powder with 60 to 70micron thickness.product dimensions:1800 mmlx540mmwx1430mmh), surf board(surf board made from c class gi pipe (is 1239(part1):2004to be used by two persons at one time. closing caps are made up of low linear density poly-ethylene (lldpe) material with injection moulding. the powder coat should be poly urethane & epoxy powder with 60 to 70micron thickness. product dimension 1200mmlx450mmwx950mmh., leg press &push up board(leg press is made from c class gi-pipe(is 1239(part1):2004) the pins used are made up of solid bar. the bearings used are of 6205 permanent lubricated sealed bearing of reputed make. the nut bolts used for assembly are made from ss material.high tensile steel with galvanized nuts & bolts are used for assembling. the powder coating should be poly rethane& epoxy powder with 60 to 70 micron thicknes

State Government

CTN :40878060

08 Jul, 2025 4.88 Lacs

Gadchiroli - Maharashtra

Tender For procurement of various scientific equipments at gondwana university gadchiroli - chemical storing refrigerator - refrigerator and freezer 2-8 oc and -40oc, hot air oven- 1550 w dry hot ovencapacity 80 lit, digital hot air oven- chamber volume- 92 litersinner chambermade of stainless steel s.s. 304 mirror polished material.outer chamber- fabricated from crc materialpaint- powder coating in attractive shadesno. of trays- 2 nos. (additional shelf at extra cost)temperature range- 50 c to 250 ctemperature sensors- pt-100 typetemperature controller- microprocessor based auto tune pid controllertemperature accuracy- 1 c or bettertemperature resolution- 0.1 cpower consumption- 220/230 volt, 50 hz, single phase, ac supplymobility- bench top model, fix legsrating- 1.5 kwoverall dimensions- 635 x 720 x 790 (l x w x h) mmweight (approx.)-72 kg

CTN :40860216

02 Jul, 2025 80.04 Lacs

Moradabad - Uttar Pradesh

Tender For corrigendum : (line 19) ward no- 04 laakdi me manohar powder coating se ankita khanna tak va atar singh se tarawati se r.m. box tak va kanha gaushala se mukesh khanna (packege) tak c.c. tiles dwara sadak va r.c.c. dwara naali ka nirman karye.

CTN :40854268

07 Jul, 2025 NA

Bangalore - Karnataka

Tender For supply of high performance anti corrosion epoxy coating partno r600165500

State Government

CTN :40842043

01 Jul, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 13 numbers of district level water testing laboratories of jharkhand a-ranchi zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digit

State Government

CTN :40759794

30 Jun, 2025 NA

Udyogamandal - Kerala

Tender For corrigendum : the supply and installation of park equipments - twister standing main pipe dia-127mm, thickness-3mm baseplatedia-215mm, thickness-10mm powder coating, size:-1775*x1775*x1475*mm, sky walker main pipe dia-127mm, thickness-3mm baseplatedia-215mm, thickness-10mm powder coating, size:-1300*x610*x1350*mm, single raw machine main pipe dia-127mm, thickness-3mm base plate dia-215mm, thickness-10mm powder coating, size:-1475*x860*x1065*mm, spinner main pipe dia-127mm, thickness-3mm base plate dia-215mm, thickness-10mm powder coating, size:-1475*x860*x1065*mm, horse rider main pipe dia-127mm, thickness-3mm base plate dia-215mm, thickness-10mm powder coating, size:- -875*x635*x1740*mm, single swing 3 ft length h-7 x l 6 feet 50,10,6 mm gi + pipe & hook

Central Government/Public Sector

CTN :40866678

07 Jul, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of cable box & tool box in non lhb ac coaches for sgac coaches as per icf drawing no.icf/sk3-7-2-041 made of 1.2 thickness crca sheets confirming to is:513 (latest), the box assembly sha ll be powder coated to icf/md/specn-091 with siemens grey to shade card no. oj72 of m/s. asian paints o r its equivalent shade. the minimum coating thickness shall be of 50 microns, including with necessary cla mps & nut bolts accessories for fixing. one set contains 2 items 1. tool box - h 200 x w 250 x l 450 mm 2. cable box - h 200 x w 320 x l 1060 mm. [ warranty period: 30 months after the date of delivery ]

Epoxy Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government

State Government

State Government

State Government

Central Government/Public Sector