Latest epoxy flooring Tenders | Government epoxy flooring Tenders

State Government

CTN :40901606

14 Jul, 2025 9.78 Lacs

Diu - Daman And Diu

Tender For providing erecting and fixing of electric pole accessories from check post main road to say site bucharwada panchayat area diu - supplying and erecting led street light fittings with high power white leds wattage of 3 watt and above assembled on single mcpcb, efficiency more than 130 lm/w and corrosion free high pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate optics/ lenses, with toughened glass with company mark/ name engraved or embossed 160 to 270v, power factor more than 0.95, thd 10%, cct 3000k to 5700k,uniformity ratio >0.45, luminaire efficacy> 100 lumens/ watt. led driver efficiency > 85%. (fittings required lm-79 & lm-80 certificates) (note: below description have shown ranges of wattage capacity of led fittings. the engineer in charge may select any wattage capacity between the ranges shown.) (a) street light (ip-65), surge protection- 4kv integral and, light must have 440vac line supply with over-voltage protection. 90 watts cat. ii (make: wipro, crompton, philips, bajaj, osram) as directed by the engineer-in-charge., providing and erecting street light pole bracket comprising main b class gi pipe of 4.2 cm/ require outside dia. complete with suitable b class g.i sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted with one coat of red oxide / pu base primer and two coats of aluminium / pu paint. paint with following nos of arms. single arm bracket 1 mtr, providing and erecting xlpe (is:7098) (i)-88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (a) 4 core 16 sq. mm, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed 1.50 sq.mm 3 core round pvc sheathed., providing and erecting pipe type earthing having 150 cms. long and 2.5 cms. dia. galvanised iron pipe with coupling and buch buried in specially prepared earth pit complete with necessary 8 swg earth wire., supplying & erecting earth pit of minimum bore dia. 150mm size approved make earthing electrode consisting pipe-in-pipe technology as per is 3043-1987 made of corrosion free hot dipped g.i. pipes having outer pipe dia of 50mm having 80-200 micron galvanising, inner pipe dia of 25 mm having 200-250 micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover. (approved make oem has to submit test certificate) & having back filling compound of (b) inner chemical (ccm compound)- resistivity:- 0.2 / meter testing as per iec 62561-2017, voltage drop:- 1 volt at no load & dry form, sulphar content:- 2%(c) back fill compound :- earthing compound should be capable to retain moisture for long time necessary test report must be submitted. (b) for electrical installation up to 11kv in normal soil length of pipe - 2.00 mtrs back filling compound - 1 nos bag of 25 kg., making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground., making trench in hard murrum / tar road of suitable width of 90 cm or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground., providing & laying approved make isi marked hdpe 6kg / cm2 (class-3) as per is:4984:1995 pe-80 to be erected at road crossing on or floor as directed for laying of cable. the pipes as follow

corporations/Associations/Others

CTN :40906633

31 Jul, 2025 NA

Narmadapuram - Madhya Pradesh

Tender For repair and maint of epoxy flooring of strong room and machine house at above 6m level in pm5 bld

CTN :40853059

04 Jul, 2025 NA

Dhar - Madhya Pradesh

Tender For epoxy flooring, sanitary and plumbing work including related civil works in workshops at natrax, pithampur, dhar (mp)

Corporations / Associations / Others

CTN :40477006

11 Jul, 2025 89.82 Lacs

Hebbagodi - Karnataka

Tender For corrigendum : supplying and laying of epoxy flooring applying of pu paint and fixing of of ss hannd rail work in rbl and pit wheel lathe at hebbagodi depot

CTN :40825750

15 Jul, 2025 NA

Parganas - West Bengal

Tender For purchase of spares - pin cotter splite 4x22 is 549 steel , rivet aluminium alloy round hd 4mm x 10 mm long4x1 , slotted round head(cqa-13 10 16) , tapping screw ab 10x13mm(cqa-13 10 16) , paper sand rough no zero 300x300mm , pin taper solid steel 6mm x 30 mm(cqa-13 10 16) , toggle wood , thread nylon 10 meter longong , stop rubber , screw driver engineers 150 mmlg , hammer engineering ball pin 200 gms with handle , spatula wooden 4mm thkx20mm widex170mm long (cqae- , needle sail markers triangular sewing(cqae-p) , blank rubber , cloth cotton dasuti , screw driver 290 mm long , pin lock top with chain(cqa-13 10 16) , pin tube bracing with chain , stiffener angle , dolly rivetting for 4mm dia rivets (cqa-13 10 16) , bars aluminium alloy (10mm diax 925mm- 04 nos , 10m , pin lock inboard , pin tube bracing with chain(cqa-13 10 16) , pin track with chain(cqa-13 10 16) , pin lock bottom with chain , cordage nylon 8 dia x9m long , rope nylon size 10mmx10m long , cordage nylon 12 mm dia 10m long , scissor , 150mm long , pin lock bottom with chain(cqa-13 10 16) , spike bridging (impd-0543) , chokes small , spike bridging , wire rope steel gal engr purpose16mm dia , cross linking agent in al btl with separate 0.85 l , plug screwed boat repair rubber , pin deck coupling with chains and cleat(cqa-13 10 , box repair kit , tube bracing , buoys anchor(cqa-13 10 16 - obt) , plank small 290x820x20mm thick , fabric neoprene nylon 0.5m long(cqae-p) , adhesive ad-94 with cla swastik 0.25 litre tin , rowlock ms galvanised with chain(cqae-p) , cloth neoprene coated nylon , life jacket 40 inch , paddle boat 1600mm long , life jacket (preserver waist coat) 91 cm by 36 in , plank large 950x150x20mm thick , valve diaphragm stop air inflation oblique deflation , bout hook 3.5m lg (7.5 cm dia) , row lock , fabric , nylon , neoprene coated 0.13kg by 275mmx1030mm , foot pump double nozzle , clamps double throat (1.5in) 38 mm , cover water protection canvas boat assult universa , tube bracing(cqa-13 10 16) , bag canvas accessories , anchor bridging 60 lbs , pin mooring 320mm long with cordage 15mm x 12 mtr , bailer boat , rope nylon 12mm dia x 15m long(cqae-p) , plank bow end 410x890x20mm thick , floor board assemble frp , pad cushioning head , crucible plastic cup 100ml , brush paint flat 127mm x 12mm , rope nylon 12mm x 5m , valve air(cqa-13 10 16) , repair kit bag , boat back

CTN :40830467

16 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back shall be electros

CTN :40830509

14 Jul, 2025 12.64 Crore

Rajpipla - Gujarat

Tender For preparation, supply and fabrication at site of furnitures items for hostels, mess building and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada package-1 - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying and placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 450 10 mm(d) x 450 10 mm(w) and back size shall be 450 10 mm(w) x 400 10 mm(h) from seat. overall height shall be 820 10 mm, overall depth 530 10 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., wardrobe - single unit- single shuttered single unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 450mm (w) x 500mm (d) x 1870mm (h). storage shall have 4 nos. of adjustable shelf. the doors shall be operated with aesth

CTN :40801204

12 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supply of pcgi ceiling panels 50mm thk , pcgi wall panels 80mm thk , puff panel base track , structural materials for puff panels pre painted gi sheets , gi riser connection for puff panels , aluminium straight coving , aluminium 3d corner coving , epoxy coving , epoxy flooring 4mm , m and l for epoxy yellow marking , cleanroom view panels size 1200mm x 900mm , cleanroom modular door size 900mm w x 2100mm h single door , cleanroom modular door size 1800mm w x 2100mm h double door , cleanroom modular door accessories , cleanroom led lighting fixtures size 24 inch x 24 inch , pcgi return riser with ss304 grill

CTN :40793544

11 Jul, 2025 NA

Bathinda - Punjab

Tender For supply of supply of stores and erection of hardstanding of size 33m x 30m and 35 point 50m x 30m total 2055 sqm for 3 ton bearing capacity , design and erection of covered parking apron of size 25m x 20m x 6m ht with foundation and epoxy flooring and bird proofing all as per given drg and specification , supply of all mtrl and erection of chain link fence for length 80 mtr and ht 1 point 80 mtr , supply of all stores and erection of open genr shed of size 6m x 4m x 3 point 20 m hight , supply of stores and erection of external and internal electrification as per given drg and specification , supply of misc items drain and plinth protection and gi pipes as per given drg and specification