Latest epoxy paint Tenders | Government epoxy paint Tenders

State Government

CTN :45711886

30 Jun, 2026 NA

Shimla - Himachal Pradesh

Tender For maintenance of nh-22 (new nh 05) from km 13/00 to 24/250 and 153/180 to 156/507 on kalka-shimla wangtoo road (sh: cutting of grass and bushes, prov.& applying white washing, clearance of chowked drains,, finishing with epoxy paint between rd 18/00 to 19/00)

Central Government/Public Sector

CTN :45718200

16 Jul, 2026 NA

Thiruvananthapuram - Kerala

Tender For supply of epoxy paint glossy conforming to rdso spec .no. m&c/pcn/123/2011 in golden yellow color ,packing in 20 ltrs drums. material packed epoxy resin in 16 ltrs (20 ltrs drums) epoxy hardener 4 ltrs (4 ltrs pack). [ warranty period: 12 months after the date of delivery ] ]

State Government

CTN :45273027

13 Jul, 2026 NA

Kheda - Gujarat

Tender For corrigendum : supply of ms grill and fabrication & epoxy paint of stairs, railing , structure inside chimney stage- 2 wanakbori tps

corporations/Associations/Others

CTN :45726210

14 Jul, 2026 40.00 Lacs

Chinchwad - Maharashtra

Tender For m and r to water supply schemes at ranjangaon strengthening of ms pure water rising mains by using bituminous water miscible epoxy treatment at water supply scheme ranjangaon

CTN :45727838

25 Jul, 2026 NA

Kharagpur - West Bengal

Tender For supply of set of items for anti corrosive epoxy paint, colour: basalt grey to ral 7012. (i) pack %u2018a%u2019 and %u2018b%u2019 to be supplied in total 25 litres packing. (ii) colourless low odour mineral spirit to dilute epoxy coating material, qty: 2.5 litres per 25 litres of epoxy paint [i.e. 10 per cent of epoxy paint quantity] to be supplied in suitable packing [20 litres maximum]. matl.& specn : -- rdso specification no. rdso/m&c/pcn/123/2018 with rdso's amendment no. 1b (rev. 2.0) as an additional requirement. [ warranty period: 10 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

CTN :45680950

06 Jul, 2026 NA

Gautam Budnagar - Uttar Pradesh

Tender For supply of thinner for epoxy paints (bhel) (q3) , gum spirit of turpentine (oil of turpentine) conforming to is 533 (q3) , ready mixed paint, air drying, red oxide zinc chrome, priming (v2) as per is 2074 (q3)

CTN :45691256

16 Jul, 2026 NA

Ernakulam - Kerala

Tender For epoxy primer, red colour , thinner, sheenlac brand, di3x , paint, epoxy finish, dark admirality grey , thinner, f/epoxy paint

CTN :45686658

02 Jul, 2026 3.47 Lacs

Mananthodi - Kerala

Tender For annual maintenance of gas crematorium equipment at mananthavadi municipality wayanad district proposed under 2025-26 annual plan. project no-1068 - civil work, od319315/2025-2026supply, replacement and servicing of automatic burner and fitting gas line., od319328/2025-2026cleaning of chimney surface, machinery repairing, removal of soot and rust, and applying primer with two coats of epoxy paint., od319385/2025-2026repairing damaged brickwork by removing broken bricks and replacing them with new bricks using cement mortar. the work also covers proper alignment,joint finishing, curing, and cleaning of the repaired area, complete as per direction of engineer-in-charge, od319413/2025-2026servicing and maintenance of the motor electrical system, such as inspection of wiring, terminals, switches and connections. it also covers tightening of loose connections, minor repairs, testiong for proper operation, and ensuring safe and smooth functioning of the motor., od319470/2025-2026reparing damaged or worn-out bed with 18 mm ss rod structures by alignment correction, replacement of defective parts if required, welding or fastening works, and ensuring proper strength and stability., od319499/2025-2026repairing of the gas valve system, such as cleaning , replacement of worn-out seals orcomponents if required, leak testing, and ensuring smooth and safe operation. the work shall be carried out as per safety norms., od319520/2025-2026removal of rust, scale, and old loose paint from equipment surface by wire brushing /scrapng, surface cleaning, application of suitable anti-corrosive primer, and finishing with two coats of approved paint. the work includes all materials, labour, tools and incidental charges required to complete., od319580/2025-2026comprehensive maintenance of the installed equipment for a period of one year, covering routine inspections,servicing, minor repairs,adjustments and ensuring continuous and safe operation. including survice of burner, blower, impeller and chimney. the rate includes labour, tools and incidental charges during the maintenanace period, excluding major replacements unless specified.

CTN :45692458

15 Jul, 2026 75.91 Lacs

Panaji - Goa

Tender For supply of machinery and equipment - uv-vis spectrophotometer spectrophotometer should be of true double beam optics system. sample compartment should have dedicated one reference cell holder and one sample cell holder. system should be czerny-turner monochromator with lo-ray-ligh grade blazed holographic grating or equivalent. system should have a light source of 20-w halogen lamp and deuterium lamp. automatic switch over of light source to be possible and auto position adjustment. system should have a fixed spectral bandwidth of 1nm. system should have facility to use as stand-alone keyboard-display and with pc-controlled software. wavelength range should be from 190 nm to 1100 nm and wavelength accuracy should be 0.1 nm at d2 656.1 nm & 0.3 nm for entire range. stray light: less than 0.02% at 220 nm (nai)less than 0.02% at 340 nm (nano2) less than 0.5% at 198 nm (kcl) photometric range:absorbance: -4 to 4 abs transmittance: 0% to 400% system should have photometric accuracy : 0.002 abs at 0.5 abs 0.004 abs at 1.0 abs 0.006 abs at 2.0 abs(measured using nist930d/nist1930 or equivalent) system should have a baseline flatness: less than 0.0006 abs (1,100 to 190 nm, one hour after light source turned on) system should have a noise level: less than 0.00005 abs (700 nm). detector should be silicon photodiode only. system should have a usb drive port to connect the printers or external drives. system should compulsorily have bio-method mode of measurement for determining dna and protein concentrations. quantitates dna or protein using the absorbance at 260/230nm. system should be capable of identification of organic compounds, chemical reaction tracking and enzyme reaction measurement. pc with relevant hardware including monitor keyboard, mouse., fuming hoods the proposed floor-mounted aerodynamic fume hood (1800 1000 2350 mm) is designed for safe handling of hazardous fumes, ensuring high performance, durability, and compliance with international standards. the system should be a robust, corrosion-resistant, and safety-compliant solution with efficient airflow management, user-friendly maintenance features, and adherence to international laboratory safety standards ideal for advanced research and chemical handling applications.1) design & compliance aerodynamic structure with automatic bypass airflow system. conforms to ashrae 110:2016 / en 14175 standards, including tracer gas containment test. certified ashrae compliance required 2) construction & materials made of powder-coated galvanized iron (gi, 120 gsm, is 277 compliant) sheet thickness: 1 mm (1.2 mm for structural supports) heavy-duty base frame: 60 40 2 mm phenolic resin (6 mm) inner liner: chemical-resistant, smooth, easy to clean ss 304 worktop with 15 mm raised edges for spill containment ss 304 aerodynamic airfoil with anti- corrosive coating 3) dimensions & workspace usable workspace: 1500 mm (w) 850 mm (d) 1180 mm (h) clear viewing height: 1100 mm modular base cabinets with maintenance access 4) coating & finish 8-stage chemical pre-treatment epoxy polyester / polyurethane coating (70 80 microns) corrosion resistance validated by 1000-hour salt spray test 5) functional features vertical sliding toughened glass sash (4 5 mm), counterbalanced openable front top panel for easy maintenance aerodynamic baffle system for efficient fume removal (light to heavy fumes) flow control damper for airflow regulation 6) utilities & safety integrated gas, water, and electrical fittings in corner posts remotely operated, color-coded service valves safety partition between utilities no cable entry below sash (enhanced safety design) electrical fittings: norysis /legrand (230v, 5/16a, 50 hz) 7) accessories pp cup sink with water tap and drainage led lighting with protective enclosure adjustable leveling screws ( 10 mm) storage base cabinets with shelves and self-closing shutters 8) centrifugal blower specifications remote, silent ms + frp blower with chemical-r

CTN :45531006

27 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For bid to ras corrigendum : supply of metal alloy casting water tap with aerator (v2) (q3) , hardner hv 9534 + araldite resin 5 kg (hardner k 9) (q3) , tower bolts (ferrous metals) as per is 204 (q3) , thinner for epoxy paints (bhel) (q3) , varnishes or shellac varnish as per is 347 (q3) , steel butt hinges as per is 1341 (q3) , hasps and staples as per is 363 (q3) , wood screws (q3)

Epoxy Paint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

corporations/Associations/Others