Get complete information related to latest Epoxy Painting Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Epoxy Painting Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Epoxy Painting Tenders.
Tender For intergard269 (international) -n8010-p063004 , international thinner gta220-n8010-001549 , anti corrosive paint, fresh water tank-n8010-007652 , anti corrosive paint, avgas/avcat-n8010-007653 , h. p. anticorrosive paint for use under non-skid coat- n8010-007694 , h. p. advanced non-skid coating for helo & flight deck-n8010-007693 , inter shield ena 301 alluminium-n8010-p061831 , inter shield ena 300 bronze ani corrosive paint-n8010-p061832 , international thinner gta007-n8010-001174 , tie coat for application of tin free spc a/f paints- n8010-p009601 , brown/light red tin free spc a/f paint for u/w application-n8010-p009602 , red brown/darkred tin free spc a/f paint for u/w application-n8010-p009603 , black colour tin free spc a/f paint for boottop application , interthane 990 white base paint-n8010-p063088 , epoxy based anti corr paint for application in ballast tank- n8010-p009679 , intershiled 300 for weather deck & helo deck-n8010-p064025
Tender For supply of set of items for anti corrosive epoxy paint, colour: basalt grey to ral 7012. (i) pack %u2018a%u2019 and %u2018b%u2019 to be supplied in total 25 litres packing. (ii) colourless low odour mineral spirit to dilute epoxy coating material, qty: 2.5 litres per 25 litres of epoxy paint [i.e. 10 per cent of epoxy paint quantity] to be supplied in suitable packing [20 litres maximum]. matl.& specn : -- rdso specification no. rdso/m&c/pcn/123/2018 with rdso's amendment no. 1b (rev. 2.0) as an additional requirement. [ warranty period: 10 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]
Tender For corrigendum : supply of nsn8010-720532382 corrosion inhibitor pellets , nsn8010-720493180 advance internal finish coating , n8010-002098 paint non slip epoxy d a grey with hardner
Tender For supply ere commi of various electromechanical equipment like 5 no 5 cs vt pump electric motors starter panel and other allied material for flood protection works from the field area of village dang khurd outfall at rd 65000r of nigana feeder - supply, erection & commissioning of 5 c/s axial/mix flow water lubricated vertical flood pumps of 5 cs. discharge at 1440 rpm at static head of approx 6.0 mtr. having adjustable height, including ms bend including flange welding, ss/ht nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 (with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter) suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department., supply, erection & commissioning of fully automatic star delta starter of cap. 150 amp including all accessories as one incomer of mccb (150amp) with 1 no mcb for lighting load, contactor rating 120 amp, 90 amp, 70 amp with control transformer for control supply, outgoing indicator, having mpr & all types of protections i.e.uv/ov/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, seperate relay for single phase protection etc. complete in all respect suitable for open fields operation of 1 no. motor of capacity of 30 hp with a stand of ms channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type., supply, erection & commissioning of m.s delivery pipe 10" dia. made of ms plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & make. (including ss/ht nut & bolt, rubber packing & other fitment accessory required), supply, erection and commissioning of ms girder parallel flange section ismb 150 with primer and bituminous based paint inside & outside of length 4mtr (approx wt 60 kg per pc) as per approved make & conforming to is808:2021.
Tender For supply erec comm of various electromechanical equipment like 3 no 5 cs vt pump electric motors starter panel and other allied material for flood protection works from the field area of village ghuskani outfall at rd8350 l of nigana feeder - supply, erection & commissioning of 5 c/s axial/mix flow water lubricated vertical flood pumps of 5 cs. discharge at 1440 rpm at static head of approx 6.0 mtr. having adjustable height, including ms bend including flange welding, ss/ht nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 (with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter) suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department., supply, erection & commissioning of fully automatic star delta starter of cap. 150 amp including all accessories as one incomer of mccb (150amp) with 1 no mcb for lighting load, contactor rating 120 amp, 90 amp, 70 amp with control transformer for control supply, outgoing indicator, having mpr & all types of protections i.e.uv/ov/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, seperate relay for single phase protection etc. complete in all respect suitable for open fields operation of 1 no. motor of capacity of 30 hp with a stand of ms channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type, supply, erection & commissioning of m.s delivery pipe 10" dia. made of ms plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & make. (including ss/ht nut & bolt, rubber packing & other fitment accessory required), supply, erection and commissioning of ms girder parallel flange section ismb 150 with primer and bituminous based paint inside & outside of length 4mtr (approx wt 60 kg per pc) as per approved make & conforming to is808:2021.
Tender For amrut 2.0 tranche iii-development of childrens park - supply and installation of play and gym equipments - detailed specification, garden bench- supply, installation and fixing of heavy duty outdoor garden bench (3 seater, 1.50 m length) with cast iron designed side frames, fabricated using high-strength cast iron end supports with decorative and corrosion-resistant finish, and seating arrangement consisting of 1.50 m long ergonomically designed seat and backrest made of treated hardwood/hdpe/uv-resistant recycled plastic slats of suitable thickness, fixed securely to the cast iron frames using galvanized or stainless steel fasteners. the cast iron frames shall be properly finished, free from sharp edges, and coated with rust-proof primer followed by outdoor-grade epoxy/pu paint or powder coating for enhanced durability under outdoor conditions. the bench shall be designed for heavy-duty public use with stable anti-tip structure and provision for firm anchoring to the rcc foundation/pedestal using suitable foundation bolts or embedded fixing arrangement as per manufacturer s specification. the rate shall include all materials, labour, transportation, loading, unloading, erection, fixing, anchoring, testing and commissioning complete in all respects. the item shall carry a minimum warranty of 2 years against manufacturing defects and shall be supplied and installed as directed by the engineer-in- charge, suitable for parks, open gyms and public garden spaces (excluding cost of concrte foundation), kids slider - supply, installation, testing and commissioning of outdoor children s play equipment frp & gi pipe combo double slide with frp roof, suitable for children up to 12 years of age, comprising a dual slide structure with two slides oriented in different directions, fabricated using isi-marked gi pipes conforming to is 1239 for main support frame with minimum 100 mm od and 3.0 mm thickness, and intermediate members of suitable diameter with minimum 2.5 3.0 mm thickness. the sliding surfaces shall be made of high-quality uv-resistant moulded frp with smooth finish and rounded edges for safe play, and provided with a durable frp roof canopy for protection from sun and rain. the structure shall include anti-skid climbing steps made of frp/hdpe or textured ms/steel treads, ergonomic handrails with uv-resistant coatings, and all welded joints shall be smoothly finished and free from sharp edges or projections. the entire assembly shall be treated with rust-proof pre-treatment, epoxy primer and outdoor-grade polyester powder coating of minimum 80 microns thickness for enhanced durability. the equipment shall be designed for safe use by children up to 12 years of age and installed on rcc m20/m25 concrete foundation blocks as per manufacturer s recommendation, using stainless steel or galvanized fasteners with proper anchoring. the rate shall include all materials, labour, transportation, unloading, erection, fixing, anchoring, testing, commissioning and all incidental works required for complete installation. the item shall carry a minimum warranty of 2 years against manufacturing defects and shall be supplied and installed complete as directed by the engineer-in-charge(excluding cost of concrte foundation), swing set- supply, installation, testing and commissioning of outdoor gi a-frame double swing set (two-seater) with chain suspension system, suitable for children up to 12 years of age, fabricated using isi-marked gi pipes conforming to is 1239 for the main a-frame structure with minimum 100 mm od and 3.0 mm thickness, and other supporting members of suitable diameter with minimum 2.5 3.0 mm thickness. the a-frame shall be designed for high stability and structural safety with properly braced side members and cross members, and provided with two child-safe swing seats made of hdpe/lldpe or frp with anti-skid surface and rounded edges for safety. the seats shall be suspended using heavy-duty galvanized steel chains of adequat
Tender For bid to ras providing of repair and overhauling service - epoxypainting inside water tank of vehicles; epoxypainting inside water tank of vehicles; yes; buyer premises
Tender For nsn8010-720532382 corrosion inhibitor pellets , nsn8010-720493180 advance internal finish coating , n8010-002098 paint non slip epoxy d. a grey with hardner