Latest epoxy phenolic coating Tenders | Government epoxy phenolic coating Tenders

CTN :45707583

11 Jul, 2026 NA

Ferozepur - Punjab

Tender For material and labour for construction of view cutting fence (2200 mtr) in ferozepur - site clearance complete all as specified and as directed. , excavating in trenches, not exceeding 1.5 m wide or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth for foundation etc and getting out in soft/loose soil complete all as specified & directed., , excavating in post holes each n. exc. 0.5 cum and getting out in soft lloose soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm complete all as specified., , material and labour for providing cement concrete in foundations 1:4:8 type d2 (using 40mm graded stone aggregate) filling and mass concrete complete all as specified & directed, , material only for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed., , material and labour for providing cement concrete 1:2:4 type b1 using 20mm graded aggregate as in copping including weathering, slightly rounded or chamfered angles and necessary formwork complete all as specified and as directed, , material only for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed., , supply and fix rolled mild steel fe-410 (grade e-250a) angle or tee section as in post, cut to length and bend to shape as directed, fixed independetly without connecting plate etc, including provision of 05 to 06 nos gaps/outs/holes in each post for providing/laying ppgi sheet and one coat of red oxide zinc chrome primer after preparation of new steel surfaces complete all as specified and as directed., , supply and fix rolled mild steel fe-410-w (grade e-250) quality a framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed., , supply and fix of pre-painting galvalume sheets having pitch 190mm, depth 29mm and not less than 0.50mm thickness having tensile strength of 550 mpa (galvalume base-ppgl trapezoidal profile sheets) fixed with self tapping screws of size 75/100mm and aluminium washer of suitable size in view cutting complete all as specified and as directed.

State Government

CTN :45723782

30 Jul, 2026 3.45 Crore

Kota - Rajasthan

Tender For neurosurgery items consumable, proprietory,implants tender- (anterior cervical plating system variable angle screw system), (anterior cervical interbody fusion device with screw mechanism (zero profile), anterior cervical interbody fusion device with integrated plate., , cervical peek cage, , expandable corpectomy cages., , expandable corpectomy cages with integrated screw mechanism, , locking cervical cage with plate, , titanium mesh cage for vertebral body replacement per mm diameter, , odontoid screw, , top loading pedicle screw system, , ton loading presssembled bobravial nedicle, , a) polyaxial screw, , b) rod, , c) reduction screw, , d) cannulated polyaxial pedicle screw for reinforcing using bone cement, , transforaminal lumbar interbody fusion. (tlif), , a) cage for open surgery, , b) cage for endoscopic surgery, , posterior lumber interbody fusion plif., , kyphoplasty kit, , vertebroplasty kit, , hydroxyapatite (ha) coated pedicle screws, , multilevel percutaneous pedicle screw fixation for thoraco lumbo - sacral fixation., , a) pedicle screw, , b) rod, , pedicle screw system with cobalt chrome multiaxial head, , fenestrated percutaneous pedicle screw fixation system, , burr hole covers with screws, , vp shunt, , pressure valve, , omaya reservior, , theco paritoneal shunt, , dainage systen, , should be onlay dural graft,, , * should be bioabsorbable,, , * suturing/gluing should not be required,, , * should be sterile., , , , , , , , , , , , fibrin glue, , biological fibrin glue with calcium chloride human protein kit 2 ml, , flowable haemostate, , absorbable gelatine based topical flowable haemostate with prefilled syringe., , bone cement, , synthetic pmma & hydroxyapatite combine with osteoconductivity., , -should be 50% hydroxyapatite in the powder component., , spinal card implant, , inratheacal programmable pump, , dural patch, , recharge free implantable sacral neuro stimulator (mri compatible):, , nasal packing, , alcohol nasal packing with thread -equivalent to merocell of medtronics/ ultracel absorbent innovia, , dye indocyanine green dye- 20 ml/50 ml, , dye levulanic acid-020 ml/50 ml, , bipolar bipolar cable: compatible with alan made cautery, , bipolar cable, , cable: compatible with storz endoscopy cautery, , bipolar bipolar cable: compatible with shalya made cautery, , bipolar bipolar forceps non sticky tip bayonet / straight: compatible with alan made cautery, , bipolar forceps, , forceps non sticky tip bayonet / straight: compatible with storz endoscopy cautery, , bipolar forceps, , forceps non sticky tip bayonet / straight:compatible with shalya made cautery, , shunt subcutaneous ventriculo peritoneal shunt passer (paediatric), , shunt subcutaneous ventriculo peritoneal shunt passer (adult), , microscope, , disposable microscope cover for pentero 900, , b, , c-arm cover, , ot shoes, , drapes, , antimicrobial/iodofor impregnated drapes of various sizes, , balloon catheter, , balloon catheter for endoscopic third ventriculostomy -4 fr/5 fr, , aneurysm clip (sugita type), , be made up of titanium/mri compatible material., , i. sugita type, , ii. made of titanium or mri compatible material, , iii. both temporary and permanent type, , iv. fenestrated/ non fenestrated, , v. in various shapes straight/ up curve/down curve/bayonet type/ right angle be lateral bent, , vi. sizes mini/5mm/6mm/7mm/8mm/9mm/10mm/ 12 mm in each shape and type, , vii. with clip applicators availability for both permanent and temporary clips of vam time of surgery, , cushing dural hook 140mm, , gruenwald forceps bayonet shape,- 7" t.c. tip, , 200mm mayo hegars needle holders, , hegar needle holder withgroove 20cm, , brain cannula 8mm, , brain cannula 10mm, , mayos scissors cd. 160mm, , gerald dressing forceps bayonetplain 190mm, , yasargil micro scissorstraight 185mm, , jacobson micro scissorcurved 185mm, , potts-yasargil micro scissor angled 45 deg, 185mm, , micro suture tying forceps straight tip 0.3mm x 150mm, , micro suture tyi

corporations/Associations/Others

CTN :45708949

18 Jul, 2026 8.95 Lacs

Nashik - Maharashtra

Tender For repairing of chrome plate bath

CTN :45726004

13 Jul, 2026 NA

Tirunelveli - Tamil Nadu

Tender For purchase of mechanical lab equipments - hydraulic cylinder - bore diameter : 50 mm , stroke length : 250 mm, working pressure : 160 bar , cylinder tube : honded steel , piston rod : hard chrome plated , seals : standard industrial seals, end caps : steel, hydraulic operated directional control valve (dcv) - type: manual spool type dc valve, configuration : 4/2 way, size : ng06(cetop 3) , rated pressure : 210 bar, flow capacity: 20 - 40 lpm, body: hardened steel / cast steel, spool: ground and hardened, ports : clearly marked ( p, a, b, t ) , supply : mounted on training plate , suitable for dismantling and study, a) sliding mesh gear box for dismantling and assembing - max transmitted power 1 to 1.5 hp , torque capacity - 40 to 200 nm,number of speed 3 to 6 , gear module 1.5 to 2 , . gearbox type : sliding mesh forward gears - 3, reverse - yes, gear material - alloy steel, lubrication - splash/ oil, gear teeth : spur, typical gear ratio - 3:2:1 / 2:0:1 /1:3:1, input speed : 0-1800 rpm , housing material : cast iron (b) constant mesh gear box cut section - constant mech gearbox (cut section), gearbox type : constant mech, forward gears : 4 , gear teeth- helical/spur ,dog clutch type - sliding ,lubrication - oil sae 80w90 ,housing - cut section,material -hardened alloy steel, educational features - labelled parts, 3d printer - build volume : 256x256x256 cu.mm ,shell enclosed (plastic & glass ),nozzle 0.4 mm stainless steel included ,max hot end temperature 300 c ,nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm, build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate. max build plate temperature 100 c ,max speed of tool head 500 mm/s ,max acceleration of tool head 20 m/s2 ,supported filament pla, petg,tpu, pva, pet,abs, asa chamber monitoring camera low ,rate camera 1280 x 720/0.5 fps ,timelapse supported ,filament run out sensor : yes, control board fan closed loop control ,auxiliary part cooling fan closed loop control ,air filter activated carbon filter

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

CTN :45691278

11 Jul, 2026 2.30 Lacs

Sultanpur - Uttar Pradesh

Tender For electro formed pure nickel screen (99.99% ) duly hard chrome plate. for sc 1100/30degree , electro formed pure nickel screen(99.99% ) duly hard chrome plate. nk 1100/30 degree

CTN :45689231

06 Jul, 2026 NA

Delhi - Delhi

Tender For sepcial maintenance of scorpio including accessories - number plate punching , flag rod with mounting , seat covers , floor matting , steering wheel cover , star box complete , hand towel , foot mats , army logo with army-1 plate , user mirror , rain guard , side curtains , rear curtain , modification of footrest , cabin lights , chrome accessories package

Central Government/Public Sector

CTN :45666480

03 Jul, 2026 4

Dhanbad - Jharkhand

Tender For tender for supply of bucket bushing p. no- 4433671 , bucket bushing p. no- 4258965 , ac crimping tools p.no- rd511250p , seal kit hoist p.no.- 955hc0025 , composite wear plate 150mm x 300mm x 13mm , (8mm in backing plate ms and 5 mm hardness deposit of chrome carbide hardness 60-62 rc , steel jointing electrode size- 4mm x 350mm , uts 77 to 87 kg. /mm2 elongation 30% to 35% current ac - 70 amp. to 135. , gauging & chamfering electrode size- 4mm x 350 mm current 230-300 amps , heavy coated low hydrogen electrode uts 52 - 55 kg/mm2 , elongation 28% size - 4mm x 450 mm. current 150 to 190 amps

Central Government/Public Sector

CTN :45577787

07 Jul, 2026 29.08 Lacs

Delhi - Delhi

Tender For tender for supply of washroom fixtures -supplying of urinal sensor plate of size 5 x 5 inch ss steel grade 304 or equivalent or make as per aai approved make list with allen key type screws including all plate cuttings for screws complete as per satisfaction and direction of engineer in charge , supplying of sentronic urinal sensor eye for urinal sensor of make roca model no rt5x9315e00 or make as per aai approved make list complete as per satisfaction and direction of engineer in charge the sensor eye should fit perfectly in the existing unit of roca make installed in washrooms , supplying of sentronic urinal dc battery box for urinal sensor of make roca model no rt5x9315e00 or make as per aai approved make list complete as per satisfaction and direction of engineer in charge the battery box should fit perfectly in the above mentioned existing unit of roca make installed in washrooms , supplying of solenoid valve for urinal sensor of make roca model no rt5x9315e00 or make as per aai approved make list complete as per satisfaction and direction of engineer in charge the solenoid valve should fit perfectly in the above mentioned existing unit of roca make installed in washrooms , supplying of solenoid valve packing kit for urinal sensor of make roca model no rt5x9315e00 or make as per aai approved make list complete as per satisfaction and direction of engineer in charge the solenoid valve packing kit should fit perfectly in the above mentioned existing unit of roca make installed in washrooms , supplying of complete filter and washer for urinal sensor of make roca model no rt5x9315e00 or make as per aai approved make list complete as per satisfaction and direction of engineer in charge the complete filter should fit perfectly in the above mentioned existing unit of roca make installed in washrooms , general service make roca model no rt5x9315e00 urinal sensor unit of make roca or make as per aai approved make list complete as per direction and satisfaction of engineer in charge , supplying of health faucet of make jaquar model no aldchr573 or make as per aai approved make list complete as per satisfaction and direction of engineer in charge the health faucet should fit perfectly in the above mentioned existing unit of jaguar make installed in washrooms , supplying of white color vitreous wall mounted european wc with cistern seat cover of make jaquar model no ops15951uf or make as per aai approved make list complete as per satisfaction and direction of engineer in charge the wc seat cover should fit perfectly in the above mentioned existing unit of jaguar make installed in washrooms , supplying of white color vitreous wall mounted european wc seat cover of make jaquar model no ops15951 or make as per aai approved make list complete as per satisfaction and direction of engineer in charge the wc should fit perfectly in the above mentioned existing unit of jaguar make installed in washrooms , supplying of bottle trap of make jaquar model no bottle trap chrome code aldchr769l300x190 or as per aai approved make list complete as per satisfaction and direction of engineer in charge the bottle trap should fit perfectly in the above mentioned existing unit of jaguar make installed in washrooms , supplying of metropole flush valve dual flow make jaguar model no flv1089dfp or as per aai approved make list complete as per satisfaction and direction of engineer in charge the flush valve should fit perfectly in the above mentioned existing unit of jaguar make installed in washrooms , supplying of overhead shower make jaguar model no ohs1989 or as per aai approved make list complete as per satisfaction and direction of engineer in charge the over head shower should fit perfectly in the above mentioned existing unit of jaguar make installed in washrooms , supplying of duracell battery ultra aa or equivalent wherever required complete as per direction of engineer in charge , supplying of complete sensor unit for washbasin of make euronics mode