Latest epoxy pheolic coating lacquer Tenders | Government epoxy pheolic coating lacquer Tenders

State Government

CTN :45213874

09 Jun, 2026 NA

Srinagar - Jammu And Kashmir

Tender For corrigendum : supply of buffy electric , tea kettle 1.5ltr staninless steel , serving spoon big , rice plate bone chaina , quarter plate bone china , case roll dunga milton 3.5ltr , try plastic big , try plastic medium , bowel bone china , tiffin 3 lyre host case type milton , kadahi iron big , tentha iron big , pooni iron big , bucket plastic action wear 20ltr , mug plastic action wear , dust bin small , dust bin medium , plastic tub 100ltr action wear , plastic tub 80 ltr action wear , green net , tarpaulin plastic 40 by 40 , trapauline plastic 18 by 24 , plastic chair samroodi , room freshener , phynle white , floor cleaner lizol , tile acid , harpic , colin 250ml , floor duster pocha , grass cutter hockey stick weeder 2.6feet , detolll hand wash , toilet brush , umbrella , thermo cool foam , drati , khurpa , garden scissor bit steel , wiper big , wire 1mm , wire 2.5mm , water motor 1hrs , water motor 2.5hrs , exhaust fan big , induction heater , brooms , gas chula double , patilla 17 inch , patilla 12 inch , fruit juicer , pipe 25mm ppr , p elbow 25mm ppr , soket 25mm , bal value 25mm , display counter for canteen glass steel , bluetuth pa system , serving boy uniform , electric cattle , pressure cooker 10ltr hawkins , air water cooler bs , rice cooker electric 5 ltr , cloth for flags polyster with different colours , towel bs different colours , bath room freshner odonil , paint , wood primer , tarpin , brush 3 inch 4 inch 6 inch , distumper washable , almunium foil

State Government

CTN :45411968

24 Jun, 2026 35.00 Lacs

Doda - Jammu And Kashmir

Tender For construction of engineering workshop and testing lab including procurement of lab instruments at dam site of bhep. - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed ordinary rock, 1 meter from cutting edge, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level thermo-mechanically treated bars of grade fe-500d or more., filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m., centering and shuttering including strutting, propping etc. and removal of form work., lintel, beams, plinth beams, girders, bressumers and cantilevers., columns, pillars, piers, abutments, posts and struts., structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing ridges or hips of width 60cm overall width plain g.s. sheets fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2, painting on g.s sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :cement mortar 1:6 ( 1 cement : 6 coarse sand), extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level, 15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand), providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 12 mm mild steel u beading, p/f in existing frames 30mm thick factory ma

CTN :45413958

24 Jun, 2026 NA

Chhindwara - Madhya Pradesh

Tender For purchase for building & other construction material - 2026-27 . . , 1 ( ), , , (60mm), (isi), ( / ), 20mm, 40 mm, , ( - ), black paint (primmum quality), green paint (primmum quality), . , , ( ) , , ( . . . ) , . ./ , (60 ), (60 ), (80 ), , , , , (18 ), (18 ), / (40 45 ), / / , 03 , (size-1 x 1 feet, glossy double charge), (size-2 x 2 feet, glossy double charge), (size-4 x 4 feet, glossy double charge), (size-2 x 2 feet, glossy double charge), (size-2 x 2 feet, glossy double charge), 2 ( ) isi thermo mechanically treated bars (tmt), 16 mm (isi mark- tata, goyal/tmt), 12 mm (isi mark- tata, goyal/tmt), 10 mm (isi mark- tata, goyal/tmt), 8 mm (isi mark- tata, goyal/tmt), 6 mm (isi mark- tata, goyal/tmt), 3 ( , , , ), truss/ms pipe/angle iron (channel gate, door, window, tree gurad etc.) , profile sheet (thiknes 0.50 mm) 14 x 3.5, profile sheet (thiknes 0.50 mm) 12 x 3.5, profile sheet (thiknes 0.50 mm) 10 x 3.5, profile sheet (thiknes 0.50 mm) 14 x 4, profile sheet (thiknes 0.50 mm) 12 x 4, profile sheet (thiknes 0.50 mm) 10 x 4, profile sheet (thiknes 0.50 mm) 10 x 2, 3 ( , , , ), , , 7 .0 x3 .6 , 7 .0 x2 .9 , 5 .0 x4 .6 , 4 .0 x4 .6 , 2 .0 x1 .6 , . . 7 0 x3 .6 x1 ( ), . . 7 0 x2 .9 x1 ( ), . . 5 0 x4 .6 x0.5mm ( ), . . 4 0 x4 .6 x0.5mm ( ), . . 2 0 x1 .6 x0.5mm ( ), ( ) 6 0 x3 .0 , 18 , ( ) 4 0 x3 .0 , 3 ( ) 2 .50 x4 .0 , 3 ( ) 4 .0x4 .0 , 3 ( ) 4 .0x3 .0 , 3 ( ) 3 .0x2 .0 , 3 ( ) 5 .0x5 .0 , ( ) 5 .0 x4 .0 , 4 ( / ), emulsion white & color inside, emulsion white & color outside, wood pin clear, emulsion paint, paint brush 4 , paint brush 6 , turpentine oil, stainer violet 100 ml, mosquito mesh steel, wire brush, sandmar paper red roll, putty (birla, jk, asian), white primer, red oxide primer, sand paper, jk white cement, pop, destemper (ddl, utsav), 6 ( )), 12 modular sheet, 6 modular sheet, mcb 6-a, mcb 10-a, mcb 12-a, mcb 16-a, mcb 25-a, fan regulator, indicator, switch, 5 pin socket, 2 pin socket, 16-a switch, 16-a socket, holder angle, round sheet, ceiling rose, fan box sheet, jackson light 3 watt, copper wire 2.5 mm, copper wire 1.5 mm, copper wire 1 mm, tape role, steel screw 1 inch, steel screw 0.75 inch, machine screw 1.5 inch, wire supply pipe 10 feet, fan box, deep junction box, 12 modular box, 6 modular box, mcb box way double, copper wire 17 no., t bend, ceiling fen (havels, cromptan, bajaj), led bulb 9 watt (havels, cromptan, bajaj, syska), led bulb 12 watt (havels, cromptan, bajaj, syska), led bulb 18 watt (havels, cromptan, bajaj, syska), led bulb 25 watt (havels, cromptan, bajaj, syska), led tubelight 18 watt (havels, cromptan, bajaj, syska), led tubelight 32 watt (havels, cromptan, bajaj, syska), led pole light waterproff 50 watt (havels, bajaj, syska), led pole light waterproff 100 watt (havels, bajaj, syska), 7 ( ), pvc & upvc water tank 500 liters, pvc pipe 3/4 , pvc pipe 1 , pvc pipe 2 , pvc pipe 3 , pvc pipe 4 , pvc pipe 5 , toilet seat indian with flusher, toilet seat western with flusher, gate wall 1 inch, union 1 inch, water tank connector 1 inch, tank nipple 0.75 inch, plastic pipe 1 inch, elbo 1 inch, t 1 inch, socket 1 inch, t 1 x 3/4 inch, buss 1 x 0.75 inch, hose nipul 1 inch, brass elbo 1 x1 inch, brass socket 1 x1 inch, button tack 2x0.5 inch, water tap/toty full brass 3/4 , brass elbo 0.5x0.75 inch, brass socket 0.5x0.75 inch, angle cock, basin coupling, waste pipe, connector pipe, teflon tape, flanch, wash basin, pedestal wash basin/sink, sanitary pipe 3 inch, t 3 inch, elbo 3 inch, shower tape 3 x 4, sanitary pipe 4 inch, elbo 4 inch, t 4 inch, cock, solvent 250 grams,

State Government

CTN :45403999

22 Jun, 2026 NA

Chatarpur - Madhya Pradesh

Tender For building material-doors (wooden membrane door): 1. made of pinewood and finished with wood paint. 2. isi certified. 3. minimum door thickness: 30 mm. doors (wpc – wood plastic composite) solid: 1. made of wpc material. 2. isi certified. 3. door thickness: up to 30 mm. 4. density: 50. wooden door frames – sal wood (sawn timber). aluminum section complete door/window (isi marked): rounded profile, 20-22 gauge, 4 mm thickness. 1. sliding window with aluminum frame and pebbled glass, complete with stainless steel mesh. 2. bearings and locks made of aluminum. 3. frame in silver finish. 4. rubber gasket: 4 mm. iron gate/frame, iron board. insecticide – chlorpyrifos 20% ec. urea fertilizer. nails (3-inch). black japan bitumen paint. g.i. wire. topsoil. growth hormones. copper wire for electrical fittings (2.5 mm). copper wire for electrical fittings (1.5 mm). electrical wiring cables (10 amp, 16 amp, 20 amp, 25 amp, 32 amp); orient ceiling fans; iron grills for windows; painting materials; wall putty; white cement (for whitewashing); paints; emulsion; distemper; laminated flush doors (shutter thickness: 30 mm); ceramic glazed bathroom floor tiles (30x30 cm, isi-marked, thickness: 6–7 mm, with a premium quality certification/label on the packaging); vitrified floor tiles (60x60 cm, isi-marked, thickness: 9–10 mm, double-charged/layered, with a premium quality certification/label on the packaging); ceramic glazed bathroom wall tiles (30x45 cm, isi-marked, thickness: 6–7 mm, with a premium quality certification/label on the packaging); granite stone (thickness: 10–15 mm, premium quality); cow dung manure (2 years old, well-decomposed, with a moisture content of less than 15%, and free from pebbles, stones, and plastic); steel railings; kota stone (thickness: 15–20 mm). premium quality submersible pumps (cri) — 1 hp, 2 hp; cement (opc 43 grade, isi marked, weight: 50 kg); bricks (9" x 4" x 3") — fully kiln-fired and compliant with pwd sor standards; river sand — free from impurities such as soil, dust, gravel, or stones; crushed stone aggregate (10 mm, granite/black basalt); crushed stone aggregate (20 mm, granite/black basalt); crushed stone aggregate (40 mm, granite/black basalt); murrum (laterite gravel) & boulders — free from contamination by soil or black cotton soil; steel reinforcement bars (isi marked, thermo-mechanically treated/tmt) — 12 mm; steel reinforcement bars (isi marked, tmt) — 10 mm; steel reinforcement bars (isi marked, tmt) — 8 mm; steel reinforcement bars (isi marked, tmt) — 6 mm; binding wire; iron angles; paver blocks (60 mm) — colored and polished; profile sheets (corrugated/roofing tiles pattern); plastic profile sheets; g.i. (galvanized iron) profile sheets; stone dust.

Central Government/Public Sector

CTN :45365796

27 Jun, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered wi

CTN :45307720

02 Jun, 2026 NA

Dehradun - Uttarakhand

Tender For supply of binding wire , gi wire 4 mm , thermo plastic paint white , glass bids for road marking , thermo plastic paint yellow , timber size 4inch x 3inch x 10ft , timber size 4inch x 4inch x 10ft , angle iron size 75 x 75 x 6 mm , paint interior white , paint exterior white , paint distember white , paint wood primer , paint metal primer , paint enamel white , paint enamel brown , paint enamel golden yellow , paint enamel green , paint enamel black

corporations/Associations/Others

CTN :45274906

03 Jun, 2026 NA

Dahod - Gujarat

Tender For bid documents for providing, supplying and laying of speed breaker, cat eye and thermo plastic paint on main road at dahod nagarpalika under: government grant and nagarpalika self fund-year-2026-27. (annual rate contract)

corporations/Associations/Others

CTN :45143777

18 May, 2026 7.99 Lacs

Ananthapur - Andhra Pradesh

Tender For providing of thermo-plastic paint for road margin markings at major roads ntr marg in ananthapuramu municipal corporation, anantapuramu.

CTN :44982459

14 May, 2026 NA

Delhi - Delhi

Tender For bid to ras supply of boq boq c c - 6810-000031 , soda ash tech , ni v , target reflector 10x10 green , dtd 5567a , epoxy primer , bq couplant glycerin , bq couplant glycerin , 53895 , polishing disc , 8040-000008 , adhesive padding glue (tin) , exp/ethyl , ethyl glycol , 800c , super thermo paint , loctite-64850cc , sealant

CTN :45021002

11 May, 2026 2.52 Crore

Multi City - Karnataka

Tender For providing scientific humps, hrpc, lane dividers, thermo plastic paint and other road safety works in arterial and sub arterial in south and bommanahalli zone

Epoxy Pheolic Coating Lacquer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others