Latest epoxy plaster Tenders | Government epoxy plaster Tenders

Central Government And Public Sector

CTN :40211295

24 May, 2025 NA

Chittorgarh - Rajasthan

Tender For tender for supply of / 9 9 % % anti corrosion or erosion putty - supply of high build anticorrosive immersion grade epoxy putty-coating make- itw devcon - belzona - henkle - stanvac chemical india ltd as per detail technical specification enclosed , supply of primer for item no 1 high build anticorrosive immersion grade epoxy coating- putty make- itw devcon - belzona - henkle - stanvac chemical india ltd as per detail technical specification enclosed , supply of high performance brushable ceramic metal surface putty-coating make- itw devcon - belzona - henkle - stanvac chemical india ltd to protect metal from erosion- pitting- cavitation as per detail technical specification enclosed , supply of wear resistant ceramic- metal rebuild putty of make- itw devcon - belzona - henkle - stanvac chemical india ltd for repair wear parts- pitting as per detail technical specification enclosed , application of item no. 1 item no. 2 item no. 3and item no. 4 on pump column pipes surfaces- equipments including cleaning the surface of all dirt , dust , rust and other foreign matter by mechanical cleaning and grit blasting as per detail procedure enclosed

CTN :39925996

16 May, 2025 21.75 Lacs

Jaisalmer - Rajasthan

Tender For corrigendum : supply of various item for water supply system at rgtpp ramgarh.-, hdpe pipe end preparation syitable to victaulic style 905 coupling, dn 110 sdr 13.6 pe 100 wall thickness 8.1 mm to 9.1 mm as per is 4984:2016 amendment 2, fr grade (fire resistant) made with pre compounded black virgin resin., , victaulic style 905 hdpe to hdpe coupling od=110mm. housing: ductile iron conforming to astm a536, grade 65-45-12.both end with retaining ring: type 316 stainless steel. nitrile (standard or flush-seal) gasket: epdm vicplus gasket. temperature range -30f to +230f/-34c to +110c. may be specified for cold and hot water service within the specified temperature range. metric fluoropolymer coated bolt and nut., , victaulic style 907 hdpe to metal coupling od=110mm. housing: ductile iron conforming to astm a536, grade 65-45-12.one end retaining ring: type 316 stainless steel, other end as per ogs (original grooved system) compatible. gasket: epdm vic plus gasket. temperature range -30f to +230f/-34c to +110c. may be specified for cold and hot water service within the specified temperature range. metric fluoropolymer coated bolt and nut., , victaulic grooved end fittings (bend, tee & reducer) moc: ductile iron conforming to astm a536, grade 65-45-12., , 90 degree elbow od : 114.3 mm, , 45 degree elbow od : 114.3 mm, , equal tee od: 114.3 mm, , concentric reducer: 114.3 mm x 88.9mm, , victaulic flange adapter moc: ductile iron conforming to astm a536, grade 65-45-12. gasket 10/4/2024 epdm (green stripe color code). temperature range -30f to +230f/-34c to +110c., , dn 100 (od= 114.3mm), , dn 80 (od: 88.9mm), , os &y gate valve:, , body: grooved end ductile iron conforming to astm a536 grade 65-45-12., , body coating: fusion bonded epoxy, ral 3000 color - red. body gasket: epdm body bolts: zinc plated steel. hand wheel: ductile iron conforming to astm a536 grade 65-45-12.handwheel nut: ductile iron conforming to astm a536 grade 65-45-12.os&y yoke: ductile iron conforming to astm a536 grade 65-45-12.yoke nut: bronze, conforming to astm b62.bonnet: ductile iron conforming to a536 grade 65-45-12.bonnet bolts: carbon steel conforming to grade 8.8, zinc plated. bonnet/body coating: fusion bonded epoxy. stem: type 304 stainless steel., , o-ring seals: nitrile, , gate: ductile iron conforming to astm a536 grade 65-45-12, epdm coated gate nut: type 304 stainless steel. packing: graphite gland: ductile iron conforming to astm a536 grade 65-45-12.body: ductile iron conforming to astm a536 grade 65-45-12.body coating: fusion bonded epoxy, ral 3000 color - red, , body gasket: epdm. body bolts: zinc plated steel. hand wheel: ductile iron conforming to astm a536 grade 65-45-12, , hydro test pressure body:- 31 kg/cm2, , hydro test pressure seat:- 21 kg/cm2, , note: - valves should be supplied with both ends grooved & flanges compatible with grooving., , dn 100 (od= 114.3mm),

Central Government/Public Sector

CTN :40208793

09 May, 2025 NA

Perambur - Tamil Nadu

Tender For supply of srphc153055-coronary drug eluting stents with (1) stent on stainless steel or cobalt chromium alloy or platinum chromium alloy. (2) stent with coating of polymer carrier for active drug ( sirolimus everolimus paclitaxel or zotarolimus shown to be effective in preventing neo- intimal hyperplasia) (3) stent diameter should be from 2.5mm to 4mm and length of the stent from 12mm to 38 mm. (4) the strut thickness should be 91 micron or less. (5) stent delivery system shou ld be monorail (single operator exchange or rapid exchange). (6) stent should be compatible with 5fr guiding catheter (7) stent design should be open cell or hybrid cell type (8) stent should be a pproved by dcgi. the copy of dcgi approval should be enclosed in the tender bid. (9) the long term efficacy for ten years and safety of the stent in terms of target vessel revascularisation (tvr) a nd in-situ thrombosis (ist) should be documented / published in peer reviewed scientific journals.( 10) the documents pertaining to the efficacy and safety of the stent should be enclosed for the brand that is offered in the tender bid (11) the manufacturer/supplier should submit proof of sup ply of the stent to a major government institute. unit:no [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 la cs ]

Central Government/Public Sector

CTN :40209740

12 May, 2025 NA

Perambur - Tamil Nadu

Tender For srphc153047-coronary drug eluting stents with (1) cobalt chromium alloy (2) coating of bioabsorbable polymer carrier with abluminal and gradient coating for active drug shown to be effective in preventing neo-intimal hyperplasia) (3) stent diameter should be from 2.5mm to 4mm . the length of the stent should be from 12mm to 38 mm. (4) the strut thickness should be 91 micr on or less. (5) stent delivery system should be monorail (single operator exchange or rapid exch ange). (6) stent should be compatible with 5fr guiding catheter (7) stent design should be open ce ll type. (8) stent should be approved by dcgi. the copy of dcgi approval should be enclosed in the tender bid. (9) the long term efficacy and safety of the stent the rates of in-stent restenosis (isr ) and in-situ thrombosis (ist) should be documented / published in peer reviewed scientific journal s. (10) safety of abbreviated (one month) dual antiplatelet therapy for high bleeding risk patients should be documented in peer reviewed journals. (11) the manufacturer/supplier should submit pr oof of supply of the stent to a major government institute. bis standards for the drug eluting st ent are not available. (reference:bis catalogue ). unit:no [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 la cs ]

Central Government/Public Sector

CTN :40209746

12 May, 2025 NA

Perambur - Tamil Nadu

Tender For srphc153048-des-abbreviated dapt long -coronary drug eluting stents with (1) platin um chromium alloy (2) coating of bioabsorbable polymer carrier for active drug everolimus show n to be effective in preventing neo-intimal hyperplasia) (3) stent diameter should be from 2.5mm to 4mm. the length of the stent should be from 12mm to 48 mm. (4) the strut thickness should be 91 micron or less. (5) stent delivery system should be monorail (single operator exchange or rapid e xchange). (6) stent should be compatible with 5fr guiding catheter (7) stent design should be ope n cell type. (8) stent should be approved by dcgi. the copy of dcgi approval should be enclosed in the tender bid. (9) the long term efficacy and safety of the stent the rates of in-stent restenosis (isr) and in-situ thrombosis (ist) should be documented / published in peer reviewed scientific jour nals. (10) safety of abbreviated (three month) dual antiplatelet therapy for high bleeding risk pat ients should be documented in peer reviewed journals. (11) the manufacturer/supplier should sub mit proof of supply of the stent to a major government institute. bis standards for the drug elut ing stent are not available. (reference:bis catalogue ). unit:no [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 la cs ]

Central Government/Public Sector

CTN :40210283

13 May, 2025 NA

Perambur - Tamil Nadu

Tender For srphc153052-des-pt/cr : coronary drug eluting stents (1) on platinum chromium platf orm (2) stent with coating of polymer carrier for active drug everolimus shown to be effective in preventing neo-intimal hyperplasia) (3) stent diameter should be from 2.5mm to 4mm and length of the stent from 12mm to 38 mm. (4) the strut thickness should be 91 micron or less. (5) stent delive ry system should be monorail (single operator exchange or rapid exchange). (6) stent should be c ompatible with 5fr guiding catheter (7) stent design should be open cell type. (8) stent should be approved by dcgi . the copy of dcgi approval should be enclosed in the tender bid. (9) the long te rm efficacy and safety of the stent in terms of target vessel revascularisation (tvr) and in-situ t hrombosis (ist) should be documented / published in peer reviewed scientific journals.(10) the doc uments pertaining to the efficacy and safety of the stent should be enclosed for the brand that is offered in the tender bid (11) the manufacturer/supplier should submit proof of supply of the s tent to a major government institute. unit:no [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 la cs ]

Central Government/Public Sector

CTN :40208936

25 Jun, 2025 NA

Bikaner - Rajasthan

Tender For supply of s. s. welding electrodes size: 4 x 350 mm class m-2 coating heavy, irs-m:28/2020. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]

Central Government/Public Sector

CTN :40181523

03 Jun, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of hex head bolt m12 x 100 high tensile as per is: 1364 (part-1)-2018, ce-with prope rty class-10.9 to is: 1367 (part-3)-2017, coating as per mdts-057 and the item should be proc ured from tvs, unbrako, tuff, dfl and rdso approved sources of axle end high tensile cap screws. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40181874

30 May, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of hex head bolt m12 x 70 mm high tensile is: 1364 (part-1)-2002, ce-with property c lass10.9 to is: 1367 (part-3)-2002, coating as per mdts-057. the item should be procured fro m tvs, unbrako, tuff, dfl and rdso approved sources of axle end steel high tensile cap scr ews. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40181370

06 May, 2025 NA

Kapurthala - Punjab

Tender For supply of pan hd tapping screw st 4.2x25-c, coating as per mdts 057, as per drawing: is:7 173-1989,iso 1481,steel, packing instruction: packets of screws in quantity of 50/100/200/500 may be suitably packed in card boxes and then collectively packed in carton boxes. fur ther suitably tied with nylon strips. overall weight of each carton box should not be more than 20 kgs. each box should be labelled with plno, po no, firm name, description of item, quantity it should be ensured that the item should not rub / damage during th e transit. any transit damage will be at the cost of supplier. , quality plan: n.a. [ warrant y period: 30 months after the date of delivery ]

Epoxy Plaster Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors