Latest epoxy primer Tenders | Government epoxy primer Tenders

Central Government/Public Sector

CTN :40210458

19 Jun, 2025 NA

Jodhpur - Rajasthan

Tender For supply of pu painting kit for apricoat yellow and blood red pu paints consists of 07 item 1:-epoxy zink phosphate primer ( two pack ) to chapter ii of rdso spec. no. m&c/pcn/100/2018 amndt. 1b. qty. per kit 52 ltrs. 2:- unsaturated polyester based knifing putty colour white ( two pack ) chapter iii of rdso spec. no. m&c/pcn/100/2018 amndt. 1b. qty. per kit 40 kgs. 3:- pu surface white ( two pack ) chapter iv of rds o spec. no. m&c/pcn/100/2018 amndt. 1b. qty. per kit 34 ltrs. 4:- pu paint beige finish ( two pack ) colou r shade ral 0708040 to chapter v of rdso spec. no. m&c/pcn/100/2018 amndt. 1b. qty. per kit 44 ltrs. 5:-pu paint maroon finish ( two pack ) colour shade ral 0303045 to chapter v of rdso spec. no. m&c/pc n/100/2018 amndt. 1b. qty. per kit 05 ltrs. 6:-thinner compatible with pu paint. qty. per kit 50 ltrs. 7:-t hinner for epoxy paint compatible with epoxy primer & putty. qty. per kit 20 ltrs. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]

Central Government/Public Sector

CTN :40211224

12 May, 2025 4.49 Lacs

Medak-T - Telangana

Tender For supply of polyurethane top coat-dtd5580a (is-694) , polyurethane thinner-dtd5580a , epoxy primer-dtd 5567a , epoxy thinner-dtd 5567a

Corporations And Associations And Others

CTN :40200555

13 May, 2025 48.62 Lacs

Delhi - Delhi

Tender For supply and installation of open gym equipments under mplads funds for various locations of parks in municipal corporation of delhi - supply & installation of open gym equipments under mplads funds for various locations of parks in municipal corporation of delhi, seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size), seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for a

State Government

CTN :40144206

07 May, 2025 NA

Mandsaur - Madhya Pradesh

Tender For corrigendum : enquiry for supply of consumables as per schedule at gandhisagar hps, mppgcl,gandhisagar - hold tite pidilite 200ml std pck (71304114335-01) , pidilite mseal 1kgs (71324493605-03) , araldite huntsman 1kg packing along with hardner , ag4 cutting wheel (braided) make carborenduum/jon bhandari/norton or equivalent 100x1x16mm , ag4 cutting wheel (braided) make carborenduum/jon bhandari/norton or equivalent 100x1.6x16mm (71324514127-01) , sponge 4 inches (71324514254-05) , crc sheet 1.5 mm (4ft x8ft) (71306860730-03) , coal tar epoxy paint epilux ep555 with catalyst 524902 or equivelent (71302101004-03) , cotton waste white (7130405049603) , cotton cloth standard panna of 1.5 mtrs (71324090064-01)

Central Government/Public Sector

CTN :40181364

09 May, 2025 NA

Chennai - Tamil Nadu

Tender For supply of underframe detail items, welding parts and sheet assembly for train set mc 1. 89011004, col-i, alt 'j' - 1 no. 2. 89011005, col-i, alt 'e' - 1 no. 3. 89011008, col-i, alt 'c' - 1 n o. 4. 89011031, col-i, alt 'b' - 1 no. 5. 89011018, col-i, alt 'a' - 1 no. 6. 89011019, col-i, alt 'b' - 1 no. 7. 89011020, col-i, alt 'b' - 1 no. 8. 89011021, col-i, alt 'a' - 1 no. 9. aae11599, alt 'b' - 1 n o, 10.aad11703, alt 'b' - 2 nos, 11.aad11739, alt 'nil' - 1 no, 12.89011006, col-i, alt 'e' - 1 no. sp ecial condition : 1. all items to be supplied in loose condition with properly labelled. 2. fol lowing items from 88911004 are not required: aae11687- 2nos and aae11688-2nos. 3. items are to be bundled and labelled for each drawing as in main description. 4. suitable pack ing to be done to prevent damage during transit, unloading and rust prevention during storage. 5. finished components except ss components shall be thoroughly cleaned and applied with epoxy zinc phosphate primer as per rdso/spec no.m&c/pcn/100 latest to a dft of minimum 60 microns and mdts-094, rev.-01 with amnd-01 or latest shall be followed. f or procedure and colour shade excluding the areas as specified in detail drawings. [ w arranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40181582

15 May, 2025 NA

Basti - Uttar Pradesh

Tender For supply of epoxy laminated sheet as per is-10192 grade ep3 thickness -1.5mm [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40158613

19 May, 2025 51.74 Lacs

Udyogamandal - Kerala

Tender For tender for supply of fabrication supply installation and commissioning of ms frp conical bottom tanks details as per sl no 1 in boq , supply fabrication and erection of ms structural and working platform details as per sl no 2 in boq , supply and fixing of hdpe pipes of various sizes details as per sl no 3 in boq , supply and fixing of valves and view glass of various sizes details as per sl no 4 in boq , shifting and erection of msfrp tanks details as per sl no 5 in boq , supply and painting of fabricated structure with one coat of epoxy primer details as per sl no 6 in boq

CTN :40055374

02 May, 2025 NA

Rewari - Haryana

Tender For requirement of material at salhawas store. - synthetic rubber bush for 125 cs vt pump size 105x145x180mm., log book printed (200pages) for pump house as per sample., ms bend size 5"x 6" dia., nylone industrial safety cut resistant gloves as per sample make:-crystal, synthetic rubber bush for 150 cs vt pump size 135x175x180mm., araldite epoxy hardner 1.800kg, asbestos graphite packing 08mm dia., synthetic rubber bush for 150 cs vt pump size 115x136x175mm, socket head cap screw 16mmx 60/70mm, steel wire rope (swg) siling suitable for 15 ton load of app. 2 mtr length having both end eye-clamped as per sample, steel wire rope (swg) siling suitable for 15 ton load of app. 3 mtr length having both end eye-clamped as per sample, black polythene sheet, pvc tape roll, 6"rubber sheet pack, 5"rubber sheet pack, enamel paint black make: asian/ burger, turpentine oil, paint thinner, m.s. nut & bolt 27x100mm, m.s. nut & bolt 24x100mm, coupling link bolt for 5/10cs pump with rubber bush and washer, nylon sling 20 ton of 5 meter length, safety helmet with side slot for attachment (make-karam), hackshaw blade d/e, d-shackle 10 ton capacity as per sample, d-shackle 5 ton capacity as per sample, synthetic rubber bush size 120x87x200mm, ci coupling (pump& motor) 50 cs vt pump as per sample., ci coupling (pump) 12.50 cs vt pump as per sample., torch rechargeable eveready brigadier dl 31 3w led torch make : havells /eveready, led flood light 50w havells make as per sample, combination wrench 34 taparia/venus make, combination wrench 38 taparia/venus make, combination wrench 41 taparia/venus make, combination wrench 46 taparia/venus make, synthetic rubber bush 38x70x150 mm as per sample, ht u-clamp for 20mm dia steel wire rope, aluminum thimble 185 sqmm, ci reflux valve 5" both end flanged isi marked, ci reflux valve 6" both end flanged isi marked, pvc submersible copper cable 6 sqmm 3 core make havells/polycab., pvc heliflex pipe 6" dia., al. terminal for 630mm2 (thimble), high voltage fuse 3.3a dghsc 70 amp.(make- busshmann), ht 11 kv electrical insulation rubber mat (make -jyoti & vardhman), the above rates are inclusive of all kind of taxes including gst and other expences like f.o.r. destination and inclusive of all incidental charges, enroute & at destination. nothing extra shall be paid separately.terms & conditions as mentioned in bid document in price schedule.

Central Government And Public Sector

CTN :39112820

07 May, 2025 NA

Damanjodi - Odisha

Tender For corrigendum : supply of 415v, utilization category ac23a, 630a local isolator cabinet in sheet steel enclosure complete with 630a, 3 pole load break switch. 2. shall be with side operated handle, padlocking facility, prebreak micro switch having 1no+1nc contact. 3. micro switch contacts shall be wired to 4 sq mm tb for external termination. 4. provision of padlock system having sufficient space to lock the isolator at off position by minimum two agencies at a time. 5. complete with both power & control circuit wiring with all insulators, bus bars and control terminal blocks. 6. detachable bottom gland plate for entry of cables from bottom. 7. front door shall be hinged and inter-locked with the isolator in 'on' position. the front door should have a minimum 3 mm thickness perspex/triplex window for observation of position of contacts. 8. isolator should confirm to iec 60364 standard. 9. the dimensional drawing of the local isolator cabinet or product catalogue showing mounting arrangement of the components should be enclosed along with the offer. 10. isolator cabinet should be provided with rain canopy. 11. any isolator parts should not be made of aluminium/aluminium alloy. 12. isolator cabinet shall be metal enclosed suitable for wall fixing using 4 welded fixations, dust and vermin proof and shall be provided with degree of protection as ip-55. 13. provision for three distinct parallel busbar per phase for termination of three nos of 240 sqmm aluminum cables for incoming and two distinct busbar per phase for termination of 120 sqmm copper cable. 14. all hardware used in isolator cabinet shall be corrosion resistant. 15. minimum clearance between the live parts and detachable bottom cable gland plate shall be 400mm. 16. cabinet should be painted with alkaline resistant epoxy paint. 17. isolator cabinet shall have provision for earthing at two separate and distinct points. 18. each isolator cabinet should be supplied with panel keys., push button station specification: 1. pbs made of 2mm sheet steel enclosure with rain canopy, protection: ip-65. 2. 01 no. of green colour start pb with 1no+1nc contacts, 01 no. of red colour stop pb with 1no+1nc contacts, 01 no.of increase pb with 1no+1nc contacts <(>&<)> 01 no.of decrease pb with 1no+1nc contacts. one emergency stop push button with 1no+1nc contacts (push to lock type) shall be provided. size of each push button is of 22.5mm diameter. inscription plate for all push buttons. 3. pb shall be wired with 2.5 sq.mm. copper wire to 40 nos. serially numbered terminal blocks (tb) of elmex make having tb-5-6, 7-8, 11-12, 13-14 <(>&<)> 17-18 shorting link. 4. two nos. of cut out of size 72x72 mm for ammeter and rpm meter shall be provided. 5. 'on','off' <(>&<)> 'trip' indication led lamps in red, green <(>&<)> amber colour respectively with inscription plate to be provided. 6. all push buttons, elements, led lamps <(>&<)> cutout for ammeter <(>&<)> rpm meter shall be on the hinged door of the pb station. 7. pb station shall be weather proof, neoprene rubber gasket suitable for outdoor application. 8. 2nos. of earthing studs to be provided. 9. left side hinged door shall be provided with flexible braided copper earthing. 10. pbs shall have 04 nos. of corrosion free bracket suitable to fix on vertical surface. 11. detachable gland plate to be provided. 12. the push button shall be painted with one coat of red oxide primer <(>&<)> two coats of zinc chromate primer and finally finished with stoving enamel grey paint. 13. the push button station shall be generally in line of enclosed drawing (fig-2). 14. party to submit the drawing along with the offer for technical scrutiny.

CTN :39711455

29 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For bid to ras corrigendum : tender for supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold , ambuja , ultratech , acc , jk , dalmiya under job no 2503 op bc bkr as per store list attached , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 63-90 mm graded , stone for rr masonary less than 6 inch , mild steel bars of size 8mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , mild steel bars of size 10 mm and above dia conforming to is 432 part i 1982 make-tata , sail , jsw , mild steel bars of size 12 mm and above dia conforming to is 432 part i 1982 make-tata , sail , jsw , mild steel bars of size 16 mm and above dia conforming to is 432 part i 1982 make-tata , sail , jsw , ms binding wire , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various sizes , wooden log for props of size 3.2 mtr long 100mm dia. , app based polymeric membrane minimum weighing 3kg oblique sqm and minimum 3mm thick reinforced with polyster non wove fabric wt.as per store list att , priming surfaces and applying bitumen as a primer in base of app membrane , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms rhs of size 80x40x3.2 , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms rhs of size 50x25x2.9 , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms rhs of size 96x48x3.2 , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms plate of size 8mm thick , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms plate of size 10mm thick , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms plate of size 12mm thick , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms angle of size 40x40x6 for cleat , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete all as directed. , ms flat iron 40x5mm thick for wind tie make-tata , sail , jsw , iron welding rod confirming to is 814-2002 isi marked 3.15mm thick 100 nos pkt , water proofing compoundconfirming to is 2645-2003 make-pidilite , dr fixit , fevicol , quick setting compound make-pidilite , fevicol , quick fix , cement based paint snowcem make-berger , asian , nerolac , oil bound distemper washable quality of proprietary brand of make-nerolac , berger , asian , birla white wall care putty water resistant white cement make-nerolac , berger , asian , ppgi roofing sheet 10 feet x 3 feet long and thickness 0.63 mm with grard film the ppgi sheet shall have minium coating of 4-5 micron epoxy primer specification as per store list att , pre painted galvatume aluminium zinc coating gi based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa make-uniix , jindal mectec or eqv brand , synthetic paint enamelled og colour confirming to is 5-2004 make-berger , asian , nerolac , painting brush 4 inch isi marked , nails various size , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos oblique pkt , anodised aluminium door 1000 mm x2100 double shutter with frame including all fittings and as directed make-jindal , hindalco aluminium section weighing 0.55 kg oblique mtr. , anodised aluminium window triple track 2 track glass and 1 track wire mesh with frame make-jindal , hindalco aluminium as per store list att , anodised aluminium ventilator 1200x600 mm fixed type with glass 4mm thick thick including all fittings and as directed make-jindal , hindalco aluminium s

Epoxy Primer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors