Latest epoxy resin sale Tenders | Government epoxy resin sale Tenders

CTN :40870475

16 Sep, 2025 NA

Ernakulam - Kerala

Tender For bid to ras corrigendum : tender for supply of 44 by type hazmats chemicals d d - compound jointing , sealing compound , compound , sealing , isopropyl alcohol (ar) , corrosion preventive compound , leak test compound , lubricant , solid film , sealing compound (torque stripe) , yellow , paint , polyurethane , coating , epoxy primer , primer(ar) , dry cleaning solvent , alcohol , denatured , ethyl , epoxy , primer coating , yellow type 1 , self leveling green , sealing compound low adhesive (ar) , adhesive , silicone , thread lockers loctite , thread lockers loctite , thread lockers loctite , primerless firewall sealant (ar) , k&n filter cleaner , corrosion inhibitor (liquid) (ar) , compound sealing , high solids polyurethane coating , corrosion preventive compound(ar) , corrosion inhibitor , acetone , adhesive , adhesive , adhesion promoter , isopropyl alcohol technical , chemical conversion coating (ar) , chemical conversion (ar) , compound , aircraft cleaning , compound anti seize , anti seize compound , anti seize compound , compound , corrosion preventive , corrosion preventive (ar) , compound , corrosion preventive , sealing retaining compound , epoxy resin (ar) , general purpose liquid detergent

CTN :41412420

13 Sep, 2025 NA

Chennai - Tamil Nadu

Tender For bid to ras supply of chequered plywood for bus body building parts as per is 3513 (latest) (q3) , enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3) , thinner for epoxy paints (bhel) (q3)

CTN :41568088

13 Sep, 2025 NA

Kapurthala - Punjab

Tender For corrigendum : supply of steel almirah , steel almirah small , fully plastic moulded chair with arms seat andback cushioned , executive table or office table , library almirah steel glass front cabinet , laboratoryor libraryorcanteen table , drawing stool , computer table , computer and printer table , steel rack , conference room table , chemistry lab table , foot rest , laboratory table with boxes , lecture stand , laboratory table with drawers , notice board , single seat sofa , three seat sofa , revolving chair big , revolving chair small "steel almirah : size:- height-1981mm, width-916 mm, depth - 486mm construction: - the almirah should have welded type construction. the thickness of back panel should be 0.8 mm, other components the thickness should be 0.9mm and the shelf thickness should be 1.2 mm doors & handles: - the almirah should have full height steel hinged door & should be provided with handle. locking: - the almirah should be provided with 3 way locking mechanism & shooting bolt arrangement. shelves & load bearing capacity: - the almirah should have height wise adjustable shelf mounting and uniformly distributed load capacity per each full shelf should be 80 kg and shelves should be 4 in number and should be fully adjustable. powder coating process: - all the metal parts shall be given antirust surface treatment & and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a ) /bid number : gem/2025/b/6561795 * /dated: 25-08-2025 & & / bid document 1 / 35 controlled temperature of 1800c to 2000c. manufacturer/ supplier must have iso- 9001, 14001, bifma & ohsas certifications. certificates should be attached. leveler:-it should have leveler with m10 screw type leveler with hexagonal plastic base. ", "steel almirah small : size:- height 1270 mm, width 765mm, depth 440 mm construction: - the almirah should have welded type construction. the thickness of back panel should be 0.8 mm, other components the thickness should be 0.9mm and the shelf thickness should be 1.2 mm doors & handles: - the almirah should be provided with full height steel hinged door & should have handle. locking: the almirah should have 3 way locking mechanism with shooting bolt arrangement. shelves & load bearing capacity: - the almirah should have height wise adjustable shelf mounting and uniformly distributed load capacity per each full shelf should be 80 kg maximum and shelves should be 3 in number and should be fully adjustable shelves. powder coating process: - all the metal parts shall be given antirust surface treatment & and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a controlled temperature of 1800c to 2000c. manufacturer / supplier must have iso- 9001, 14001, bifma & ohsas certifications. certificates should be attached leveler:- it should have leveler with m10 screw type leveler with hex plastic base ", "fully plastic moulded chair with arms (seat &back cushioned) : size - total height : 820mm + 10mm, total width : 565mm + 10mm, total depth : 565mm + 10mm &total weight: 4.20 kg + 50gms cushioned chair with arms comprising of single piece moulded frame made of polypropylene & coated with pu coating paint high gloss finish with seat & back cushion made of moulded pu foam and velvet upholstery. weight of moulded polyproplene frame is 4.2

State Government

CTN :41729555

20 Sep, 2025 84.70 Lacs

Multi City - Karnataka

Tender For providing sand blasting and polymer based high performance corrosion protection epoxy coating on external surface of the penstocks between valve house to saddle no.32 for unit no.8 laid on hill slope area at sharavathy generating station. the total area of penstock pipes to be painted works out to 5223 sq. mtr. approximately. all painting surfaces should be prepared by sand blasting to achieve sa 2/2.5. the external surface should be free from abrasion, blisters, peeled off surface of the old paints rust, etc., the full surface is to be cleaned until the parent metal is suitable for painting. necessary scaffolding shall be done by the contractor. after cleaning, the surface should be applied with a coat of rust inhibitive compound, one coat of epoxy primer of approved quality and two coats of approved high performance solid anticorrosive epoxy paint. the total thickness of the coating after one coat epoxy primer paint and two coats of epoxy painting should be 240 microns as specified in detailed technical spe

Corporations / Associations / Others

CTN :41677267

22 Sep, 2025 NA

Ahmedabad - Gujarat

Tender For supply and installation of cleanroom facility - wall panel, ceiling panel , r-70 aluminium coving. (it includes 135 degree - 3 mtr 12 nos and r-70-26 rmtr) both coving, wall panel accessories to complete the installation of 48 sq mir panel., ceiling panel accessories to complete the installation of 22 sq mtr panel., air handling unit (classified). pre filter post filter.. cooling coil, heater-blower assy with drain pan, fine filter. (hepa filter 0.3 micron down to 99.997% efficiency shall be placed in terminal filter boxes in ceiling panel), recirculation type 10-15% fresh air. 85 to 90% recirculation, non cfc gas (like r-32/r-134 a/r410) cooled condensing unit with suitable accessories. (5.5 tr), refrigeration accessories., refrigerant copper piping with 19 mm thick nitrile rubber insulation on suction line and non-insulated liquid line, trays for copper piping etc. & all other accessories like expansion valve, hand shut off valve, dryer, sight glass etc., terminal filter boxes gel seal type with damper and ss grill and damper operating mechanism suitable for required qty, of air suitable for 610x610mm size filter 1000 efm capacity., hepa filter of h14 grade gel seal type 610 x610 mm, capacity 1000 cfm, terminal filter boxes gel seal damper and ss grill and damper required qty, of air suitable operatit for m size filter,, ira chan suitable, hepa filter of h14 grade gel seal type 450x450 mm., capacity 500 cfm, return air riser of 2.4 mtr to 2.7 mtr height with 10 micron filter, grill and volume control damper etc. suitable for iso class 8 clean room., return air control fire damper, air curtain 3ft width,, sheet metal ducting in 24g complete with tdf flanges, gaskets, nutbolts, stiffeners, supports with rtv sealant of higher gauge as per site requirement., thermal insulation-nitrile rubber 19 mm thk, thermal insulation-nitrile rubber 13 mm thk, fibre cloth & uv paint., dynamic garment cabinet with hepa filter h14 grade, blower assy, pre filter of 10 micron, uv light, fluroscent light, hanger, sliding/swing doors in aluminium/gl powder coating with glass, castor wheel, leveling bolt etc., electrical panel for ahu, condensing unit, heaters etc. with vfd, energy meter, mccb, contactor, relay, mcb, simer, temperature and humidity controller etc., electrical wiring with all accessories from control panel to air handling unit to condensing unit., display and control panel for hvac system., led light fixtures 600 x600 mm 36 watt, reputable company electrical cabling with all accessories for complete wiring of lab. mention design considering 3 to 4 equipment of single phase (upto 15 a) and 2 equipment of 3 phase (upto 15a)., pvc piping for draining the, dustry's re, from, ede, andling unit., cross over bench is ss304 1200 mm width x 500 mm height x 350 mm depth (approximate size), epoxy flooring 2mm thick, color as per choice., clean room compatible single leaf door with vision glass, door closer, hinges, push plate, drop seal, handle etc., m.s. structural support for ducting lines and compressors, vertical wall panel wherever require this includes fasteners, plates etc. as per required sizes., r-100 epoxy coving, color same as epoxy floor, validation & documentation., air quantities measurements, temperature, humidity, positive pressure, particle count and documentation like do, iq, oq & design, drawing etc.

State Government

CTN :41728186

29 Sep, 2025 7.01 Lacs

Kutch - Gujarat

Tender For supply and application of metal protective compound for various pipe lines/ tanks of tmd area of unit no. 3 at kltps - store code: 5810040002 zinc primer ( epoxy base - 60 percetage zinc ), store code: 5805230008 metal protector for various tank and pipe lines, store code: 8221020016 fibre glass cloth for coating, store code: 5815020029 thinner (g.p.)suitable for epoxy paint, store code: 8801010030 charges for the application of one coat of zinc primer & three coats of metal protective compound along with fibre cloth in various pipes/tanks in tmd area as per scope of works & instruction of eic.

CTN :41675334

03 Oct, 2025 NA

Ernakulam - Kerala

Tender For supply of compound, cleaning (mil-c-25769) , conductive adhesive primer (ar) (cho-bond 1030) , primerless firewall sealant(ar) (ams3374) , thermal conductive silicone compound (cho-therm 1641) , self leveling green (ht3326-5-50) , adhesion promoter (ar) (pr-182) , silicone adhesive(ar) (rtv 3140) , sealing compound, low adhesive(ar) (ams3284 ty1clb-1/2) , adhesion promoter (pr-187) , conductive adhesive (ar) (pr-188) , conductive adhesive (ar) (pr-2200 a/b) , compound, sealing (mil- prf-81733 type ii class i grade a) , compound, sealing (ams 3265 b) , sealant, thread locking (astm d5363 an0231 p13) , compound jointing (ca1000) , epoxy resin (ar) (ea9309.3na) , epoxy resin (ar) (ea9359.3) , primer (ar) { ec 1945 (76381) } , sealing compound (torque stripe) , yellow (f-1000 sentry seal) , corrosion inhibitor (liquid) (ar) (fluid film liquid a) , corrosion preventive compound (fluid film nas) , leak test compound (leak-tec 372e) , thread lockers loctite (loctitie 242) , silicon sealant (mil- a-46146 rtv 3145) , paint, polyurethane (mil-c-46168) , alodine 600 (mil-c-5541) , lubricant, solid film (mil- l-23398) , epoxy, primer coating, green, type 2 ( mil- prf-23377 tycl2) , epoxy, primer coating, yellow, type 1 ( mil-prf-23377 type 1) , corrosion preventive compound (ar) (mil-prf-46010) , paint, gloss white (mil-prf-81352) , high solids polyurethane coating (mil-prf-85285# 35237) , high solids polyurethane coating (mil-prf-85285# 36081) , high solids polyurethane coating (mil-prf-85285# 36320) , high solids polyurethane coating (mil-prf-85285# 36495) , high solids polyurethane coating (mil-prf-85285# 37038) , coating, epoxy primer (mil-prf-85582) , primer, zinc chromate (tt-p-1757) , adhesive (ar) (v- 45) , corrosion inhibitor{ liquid ar (4e827) (fluid film ar) } , sealing compound (ar) (mil-r-81294)

Central Government/Public Sector

CTN :41514677

07 Oct, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of high performance anti corrosive epoxy coating(two pack) finishing paint, colour: green to specn.rdso/m&c/pcn/123-2018 or latest. specn: rdso specification no. rdso/m&c/pcn/123-2018 or latest.

Epoxy Resin Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Corporations / Associations / Others

State Government

Central Government/Public Sector