Latest equalising stay Tenders | Government equalising stay Tenders

Central Government/Public Sector

CTN :40905050

28 Jul, 2025 NA

Danapur - Bihar

Tender For fabrication and supply of 6400 mm over-riding derailing switches 60 kg 1 in 8.5 on psc sleepers as per rdso drawing no. t-6068 with alteration 4 and conforming to irs specification no. t-1 0-2025, (complete set) with latest revision/corrigendum/amendment complete with all parts listed in t he sub assembly rdso drawing no. t-6068 including plate screws but excluding, grsp, standard fish plates, fish bolts, elastic rail clips, insulating liners/metal liners as amended up-to date of closing of e - tender. rails needed for fabrication purpose for tongue rails, stock rails and check rails will be arra nged by supplier at his own cost in terms of railway board's letter no. 2022/track-1(p)/fabricators dt. 24.01.2022. list of fittings : as per sub assembly rdso drawing no. t-6068 with alteration 4 available on rdso website (complete set) with latest revision/corrigendum/amendment complete with all parts l isted in the sub assembly rdso drawing no. t-6068 including plate screws but excluding, grsp, stand ard fish plates, fish bolts, elastic rail clips, insulating liners/metal liners as amended up-to date of clo sing of e- tender. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40797109

24 Jul, 2025 NA

Hubli - Karnataka

Tender For corrigendum : supply of lower spring beam arrangement for standard equalising stay for bg mainline non ac coaches to drg. no. t-0-5-667 alt-k. material and specification as per drawing. finished items shall be packed in wood en crates to avoid paint damage during transit and machined surfaces to be rust proof oil coated and covere d with bio degradable plastic sheets. [ warranty period: 30 months after the date of delivery ]

CTN :40899518

21 Jul, 2025 98.71 Lacs

Kota - Rajasthan

Tender For tn-20225 requirement of spares for railway track maintenance at kstps railway siding, kota. - antitheft rail clip rdso drg. no.t-6254 & t-6255, bolt & nut 25x390 mm rdso drg. no t-11534, bolt & nut 25x370mm rdso drg. no t-11532, bolt & nut 25x300 mm rdso drg. no t-11525, bolt & nut 25x260 mm rdso drg. no t-11521, bolt & nut 25x250 mm rdso drg. no t-11520, tapered split pin ce-22994/8, single coil spring washer (for 28 hook bolt), grooved rubber pad rdso drg. no t-5163, bolt&nut (t-5164)for guard rail bridge, 28 hook bolt (330 length), nut for 28 hook bolt (is-549), split pin (for 28 hook bolt)(is-549), grooved rubber pad (10mm) t-5199, elastomeric pad 25mm (245x270x25/30), elastomeric pad 25mm (245x410x25/30), elastomeric pad 25mm (245x220x25/30), check rail bolt rdso drg. no t-11513, curved switch 52 kg 1 in 12 rdso drg. no t-4733 (r), crossing 1 in 8 1/2 p&c t-20806 with complete fittings, elastic rail clip j type rdso drg. no t-4758, fish plate bolt (25x130) rdso drg. no t-11501, fish plate bolt (25x140) rdso drg. no t-1899, fish plate (1mtr.) rdso drg. no t-5915, glued joint 52 kg 6.5 mtr rdso drg. no t-5361, grooved rubber pad rdso drg. no (t-4610), grooved rubber pad rdso drg. no (t-4611), grooved rubber pad rdso drg. no (t-4612), grooved rubber pad rdso drg. no t-4613, grooved rubber pad rdso drg. no t-4614, grooved rubber pad rdso drg. no t-4615, grooved rubber pad rdso drg. no t-4616, grooved rubber pad rdso drg. no t-4617, grooved rubber pad rdso drg. no t-4618, grooved rubber pad rdso drg. no t-4619, grooved rubber pad rdso drg. no t-4620, grooved rubber pad rdso drg. no t-4621, grooved rubber pad rdso drg. no t-4622, p.c. sleepers (mono block)b6-60kg rdso drg. no t-2496, stock rail for 52 kg 1 in 8 1/2, sej 52 kg rdso drawing no. t - 4160, self sovening spring point (spring point) lever mech. -l3040, tongue raill, tongue raill 1 in 8 (approx 4.75 mtr length ) suitable for 52 kg bg track st layout as per rdso ( l), tongue raill 1 in 8 (approx 4.75 mtr length ) suitable for 52 kg bg track st layout as per rdso ( r), grooved rubber pad for sej 52 kg as per rdso drawing (t - 4161, t-4162 & t-4163), channnel sleeper (15 mc 160) 2540mm long, ms brackets rdso drawing no. t-4180, ms brackets rdso drawing no. t-4181, ms brackets rdso drawing no. t-4182, tee head bolts 25mm as per drawing no.t-2659, tee head bolts 25mm as per drawing no.t-2660, plate screw (140x24) mm rdso drawing no. t-3911, plate screw (130x24) mm rdso drawing no. t-3915, plate screw rdso drg no. t-3912, guage tie plate rdso drg. no. t-5203 & t-5203/2, slide chair rdso drawing no. t-4735, slide chair rdso drawing no. t-4736, slide chair rdso drawing no. t-4737, slide chair rdso drawing no. t-4738, slide chair rdso drawing no. t-4739, slide chair rdso drawing no. t-4740, slide chair rdso drawing no. t-4741, slide chair rdso drawing no. t-4742, slide chair rdso drawing no. t-4743, slide chair rdso drawing no. t-4744, slide chair rdso drawing no. t-4745, slide chair rdso drawing no. t-4746, slide chair rdso drawing no. t-4747, slide chair rdso drawing no. t-4748, fish plate (60/52kg) junction (t-696/699), m.s moon washer for s.t sleeper

CTN :40918430

15 Aug, 2025 NA

Bareilly - Uttar Pradesh

Tender For manufacturing and supply of 6400 mm o/r (curved) fan shaped switches 1 in 8.5, t/out for bg (1673 mm) 60kg on psc sleepers to rdso drg. no. t-4966 (alt.7) with latest alteration and conforming to specification no. irs: t-10-2025 with latest corrigendum with suppliers rails complete with stock rails an d all parts and fittings as listed in the drawing including check rails but excluding grooved rubber sole pla tes, insulating liners, elastic rail clips, plate screw, fish plates and fish bolts. (the alteration in drawing a nd specification issued by rdso up to tender closing date shall be applicable to this tender.). [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :40567751

02 Jul, 2025 NA

Allahabad - Uttar Pradesh

Tender For corrigendum : supply of railway track maintenance items - plate screw , plate screw , sej plate screw set , distance block set for turnout , check rail bolts with nut , single coil spring washer , sej bolts , bolt and nut , sej rubber pad , plate screw for guard rail

Central Government / Public Sector

CTN :40918182

23 Jul, 2025 NA

Bhubaneswar - Odisha

Tender For supply of bush for equalising stay for lower spring beam (16.25t axle), to drawing / specification no. rdso/sk-88105, alt. no. 5 , item no - 5. [ warranty period: 30 months after the date of delivery ]

CTN :40905044

28 Jul, 2025 NA

Gonda - Uttar Pradesh

Tender For fabrication and supply of o.r 6400 mm 60 kg symmetrical switches for 1 in 8.5 turnout for bg 60 kg on psc sleepers to rdso drg. no. t-5354 alt.3 (with check rail) and irs specification no- t 10-2023 with latest alteration/corrigendum issued before 15 days of tender oppening firms offer: fitt ing supply exclude plate screw, erc, liners, grsp, fish plate and bolt. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40888819

04 Aug, 2025 NA

Chennai - Tamil Nadu

Tender For supply of equalising stay pin dia 50 x 623 for bogie bolster suspension to drg.no. : icf /std-3-2-001, alt.g/10 item. 31. note: manufacturer's name, month and year of manufactu re should be punched on the item for identification. [ warranty period: 30 months after th e date of delivery ]

State Government

CTN :40747698

08 Jul, 2025 5.00 Lacs

Aurangabad-Mh - Maharashtra

Tender For supply of electrical protective devices - electrical protective devices ( l & t / legrand / indoasian), mcb single pole, a) 1 a, b) 2 a, c) 3 a, d) 6 a, e) 10 a, f) 16 a, g) 20 a, h) 25 a, i) 32 a, j) 40 a, k) 63 a, mcb double pole, a) 1 a, b) 2 a, c) 3 a, d) 6 a, e) 10 a, f) 16 a, g) 20 a, h) 25 a, i) 32 a, j) 40 a, k) 63 a, mcb tpn , a) 10 amp, b) 16 amp, c) 20 amp, d) 25 amp, e) 32 amp, f) 40 amp, g) 63 amp, mcb triple pole three phase, a) 10 amp, b) 16 amp, c) 20 amp, d) 25 amp, e) 32 amp, f) 40 amp, g) 63 amp, mcb single pole iron box (mds/l&t/indo asian/havel s/siemens/legrand), mcb d.p. iron box (mds/l&t/indo asian/havel s/ siemens/legrand)), mcb tp iron box, mcb four pole iron box, mcb 6 way box (mds/l&t/indo asian), mcb 8 way box (mds/l&t/indo asian), mcb 12 way box (mds/l&t/indo asian/ siemns), mcb tpn db 12 way box (mds/l&t/indo asian), icdp main switch 16 amp. fuse type, icdp main switch 32 amp. fuse type, ictp main switch 32 amp. fuse type, ictp main switch 63 amp. fuse type, ictp main switch 100 amp. fuse type, ictp main switch 200 amp. fuse type, kit-kat 15 amp. 250 volt, kit-kat 30 amp. 440 volt, kit-kat 63 amp. 440 volt, kit-kat 100 amp. 440 volt, kit-kat 200 amp. 440 volt, motor protection circuit breaker . as per is/iec : 60947-4-1 (l&t/indo asian/siemens/legrand), a) 0.4 to 0.63 amp, b) 0.63 to 1.6 amp, c) 1.6 to 2.5 amp, d) 2.5 to 4 amp, e) 4 to 6 amp, f) 5.5 to 8 amp, g) 7 to 10 amp, h) 10 to 13 amp, i) 13 to 18 amp, 1) star delta starter 10 h.p. (l&t/ siemens), 2) dol starter(0.5 hp to 5hp), 3) 4 pole contactors 16 amp, 4) 4 pole contactor 25 amp, 5) 4 pole contactor 40 amp, 6) 4 pole contactor 95 amp, 7) 4 pole contactor 125 amp, 8) contactors for 10 hp motors (mk), 9) on delay timer (eletx), 10) off delay timer (eletx), 11) timer (3-10 sec), a) c - channel for mounting mcb & contactor within panel, b) d rail channel for mounting mcb, mpcb & contactors, relay within panel., hrc fuse, a) 4a, b) 6 a, c) 10 a, d) 16 a, e) 20 a, f) 25 a, g) 32 a, h) 40 a, i) 63 a, j) 100 a, k) 200 a, m) 400 a, fuse wires, a) 5 a;, b) 10 a;, c) 16 a;, d) 25 a;, e) 32 a;, f) 63 a;, over load relay as per is/ iec : 60947-4-1 ( l& t, siemens, legrand, indoasian), a) 0.4 to 0.63 amp, b) 0.63 to 1.6 amp, c) 1.6 to 2.5 amp, d) 2.5 to 4 amp, e) 4 to 6 amp, f) 5.5 to 8 amp, g) 7 to 10 amp, h) 10 to 13 amp, i) 13 to 18 amp, mccb four pole ( l& t, siemens, legrand, indoasian), a) 32 amp, b) 40 amp, c) 63 amp, d) 100amp, e) 125amp, f) 200 amp, g) 250 amp, h) 400 amp, elcb ( l& t, siemens, legrand, indoasian), a) dp 16 amp, b) dp 25 amp, c) dp 40 amp, d) fp 16 amp, e) fp 25 amp, f) fp 40 amp, g) fp 63 amp, h) fp 125 amp, rccbconforms to is : 12640 & iec 61008-1,degree of protection : ip 20,sensitivity rating : 30ma / 100ma / 300ma short circuit with stand capacity of 10ka with scpdon-off indication,test button t is provided for periodic check up, a) dp 25 amp, b) dp 40 amp, c) dp 63 amp, d) fp 25 amp, e) fp 40 amp, f) fp 63 amp, switch fuse unit three phase, hrc type (l & t, indoasian, siemns), a) 125 amp, b) 200 amp, c) 400 amp, level cotroller (l & t, siemens, gic, ), a) for single tanks control, b) for two tanks control, level sensing probes (ss), level monitoring switches, floating switch with two contacts (no+ nc), magnetic level sensing probe, electronic timer chrono (radix, gic, siemens, schnider), electronic timer astrological (radix, gic, siemens, schnider), vertical tpn db with provision for mccb upto 125 aas incomer (indoasian /havells/siemens), a) 4 way, b) 6 way, c) 8 way, earthing plate, 1) copper 300x300x3, 2) copper 600x600x3, 3) g.i. plate 600x600, 4)g.i. bare conductor, 5)copper bare conductor (10swg), 6)g.i. strip, 7)copper strip

State Government

CTN :40865504

05 Jul, 2025 NA

Mandi - Himachal Pradesh

Tender For co junior engineer office jal shakti sainthal in tehsil joginder nagar district mandi h.p sh installation sanitary item in je office cum residence - prov and fixing anodized aluminium tower bolt ( barrel type) anodized transparent or dyed to require shade and colour with screwa etc complete as per the direction of engineer in charge., 250x10 mm, prov and fixing anodized aluminium tower bolt ( barrel type) anodized transparent or dyed to require shade and colour with screwa etc complete as per the direction of engineer in charge., 200x10 mm, prov and fixing bright finished handles with screws etc complete as per the direction of engineer in charge. 75 mm, prov and fixng oxidized ms hooks and eyes complete as per the direction of engineer in charge 150 mm, prov and fixng 100 mm bright finished brass floor door stopper with rubber cushion screws etc to suit shutter thickness complete per the direction of engineer in charge, providing and fixing vitreous china wash down water closet ( european type w.c pan) with integral p or s trap including jointing the trap with soil pipe in cement mortar 1 : 1 ( 1 cement 1 sand) ( seat and cover to be measured and paid for separately)complete with in all lead & lifts and to the entire satisfaction of the engineer-in-charge., providing and fixing stainless steel kitchen sink of approved standard isi make with drain board and cp waste with ci or ms brackets painted white i/c cutting holes and making good the same but excluding fitting 610 x 510 mm with bowl depth 200 mm as per the direction of engineer in charge., prov and fixing brass bib tap with capson head ( superior quality heavy type) 15 mm dia, providing and fixing vitreous china wash basin with single hole for pillar tap with ci or ms brackets painted white including cutting holes and making good the same but excludinf fitting. 630x450mm, providing and fixing of pvc water storage tank sintex having capacity of 1000 ltr. with the necessary fittings including over flow pipes, scour pipes etc r inlet and outlet and inside painting with cover and locking arrangement of good quality complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 600 mm x 450 mm bevelled edge mirrior of superior glass mounted om 6 mm thick ac sheet or plywood sheet and fixed to wooden pluges with cp brass scerws and washers complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of cp brass towel rail complete with cp brass brackets foxed with wooden plugs with cp brass screws :- 750 x 20 mm. complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 600 mm x 120 mm glass shelf with cp braclet and guard rail complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 15 mm mixer for kitchen sink with top/bottom swinging spout complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 15 mm gi elbow complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 15 mm gi tee complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 15 mm gi socket complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 15 mm gi socket complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 32 mm dia, lead waste pipe for wash basin or sink i/c brass check nut complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of liquid soap container with cp brass lid and brackets fixed to wooden plugs with cp brass screws :- plastic container complete

Equalising Stay Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector

State Government

State Government