Latest evaporation system Tenders | Government evaporation system Tenders

CTN :45736773

06 Jul, 2026 NA

Sealdah - West Bengal

Tender For water purifier. supply and installation of water purification system with inbuilt ro water purifier including ro + uf + tds controller. as per following specification: (1) purification capacity up to 40 lph, (2) number of faucet 3, (3) multifunctional system capable of supplying mineral ro hot, cold and normal water, (4) abs engineered plastic / steel powder coated floor mounted body, (5) sediment and carbonfilter cartridges with ultra- filtration membrane and auto flushing system, (6) cold water storage capacity 8l, hot water storage capacity 1 liter, total storage capacity 20 liters, (7) thin film composite 1812-75gpd membrane, (8) cooling capacity 5 liters per hour, (9) tekumseh type compressor with r134a refrigerant of52g and (10) coil type evaporator. make: kent / blue star/ eureka forbes/ voltas or usha or similar. [ warranty period: 30 months after the date of delivery ] ]

Co-operative

CTN :45715048

04 Jul, 2026 NA

Kawardha - Chhattisgarh

Tender For re tender engineering items (only oem & authorized dealers) - c.s welding electrode essen 9018 lh size-3.15 mm make- essen/ador/d&h secheron/arf/ewac, role guard grease ptfe rainforced grease 1kg. packing , epdm (shore -70 - 90) shorerubber sheet for juice heater right angle valve for vapour line suitable for 150°c with test certificate drg. no.- bssuk-02-04, make - petco/techno industrial/merutrubber/uttarkhand rubber, epdm (shore -70 - 90) rubber sheet for 1st body exhaust line valve suitable for 150°c with test certificate drg. no.- bssuk-04-04, make - petco/techno industrial/merutrubber/uttarkhand rubber , epdm (shore -70 - 90) rubber sheet for 1st effect right angle valve for vapour line suitable for 150°c with test certificate drg. no.- bssuk-26-04, make - petco/techno industrial/merutrubber/uttarkhand rubber, epdm (shore -70 - 90) rubber sheet for right angle valve 650m² suitable for 150°c with test certificate drg. no./ bssuk/b.h./88, make - petco/techno industrial/merutrubber/uttarkhand rubber, epdm (shore -70 - 90) rubber sheet for vapour valve evaporator 1st body suitable for 150°c with test certificate drg. no./ bssuk-150/11, make -petco/techno industrial/merutrubber/uttarkhand rubber, epdm (shore -70 - 90) rubber sheet for 2nd body right angle valve suitable for 150°c with test certificate drg. no./ bssuk- 138/08, make - petco/techno industrial/merutrubber/uttarkhand rubber, epdm (shore -70 - 90) rubber sheet for juice heater suitable for 150°c with test certificate drg. no.- bssukm 139/04, make - petco/techno industrial/merutrubber/uttarkhand rubber, epdm (shore -70 - 90) rubber sheet for 1st body suitable for 150°c with test certificate drg. no.- bssuk-123/07, make - petco/techno industrial/merutrubber/uttarkhand rubber, epdm (shore -70 - 90) rubber sheet for right angle valve 800m² suitable for 150°c with test certificate drg. no./ bssuk/b.h./109, make - petco/techno industrial/merutrubber/uttarkhand rubber, epdm (shore -70 - 90) rubber sheet for right angle valve suitable for 150°c with test certificate drg. no./ bssuk/b.h./108, make - petco/techno industrial/merutrubber/uttarkhand rubber, epdm (shore -70 - 90) rubber sheet for dynamic juice heater right angle valve suitable for 150°c with test certificate drg. no./ bssuk/b.h./24/10, make -petco/techno industrial/merutrubber/uttarkhand rubber, epdm (shore -70 - 90) rubber sheet for double beat valve 8" suitable for 150 ºc temp. as per with test certificate drg. no. bssuk/b.h./89, make - petco/techno industrial/merutrubber/uttarkhand rubber, epdm (shore -70 - 90) rubber sheet for juice heater right angle valve suitable for 150 ºc with test certificate drg. no./bssuk/b.h./89/200, make -petco/techno industrial/merutrubber/uttarkhand rubber, epdm rubber cord suitable for 150°c size 11x13x15mm, make -petco/techno industrial/merutrubber/uttarkhand rubber, epdm rubber cord suitable for 150°c size 13x15x17mm, make -petco/techno industrial/merutrubber/uttarkhand rubber, epdm rubber cord suitable for 150°c size 18x15x15mm, with test certificate , star coupling set r-70, make - riddhi, rubber star coupling set l-95, make - rathi/love joy, rubber star coupling set l- 100, make - rathi/love joy, rubber star coupling set l- 110, mak - rathi/love joy, rubber star l- 95, mak - rathi/love joy, rubber star l- 100, mak - rathi/love joy, rubber star l- 110, mak - rathi/love joy, "rubber star coupling size - 190mm make - rathi/love joy", pump body s.s. 304 , pump type - 100-65-250 et capacity - 20m³/hr, head - 30 mtr., rpm - 1475, make -mather & platt, pump shaft for pump type- smf 400 x450 ,sr.no.-593 year-2003 cap.-2500 m3/hr. head-15 mtr.,rpm-960 motor h.p-200 make- sintech moc- s.s 410 , "mill house cane carrier chain assembling breaking load of the chain will be 80,000 kgs. as per is : 8465-1990 (r1995) pitch 150mm with test certificate moc as per drg. no. - c-mh-3122 (heat treated)make - 1. aypee industries, jalandar 2. swajeet, jalandhar 3-raj amar 4. n.v. kalia

Central Government/Public Sector

CTN :45085677

02 Jul, 2026 NA

Allahabad - Uttar Pradesh

Tender For corrigendum : supply of thermal cum electron beam evaporation system

CTN :45455195

29 Jun, 2026 NA

Saharanpur - Uttar Pradesh

Tender For bid to ras supply of supply of new 640 m 2 h. s qb 1 evaporator body calendria with bottom saucer

CTN :45696138

04 Jul, 2026 NA

Thanjavur - Tamil Nadu

Tender For labour contract for renewal of evaporator set a 4th body shell plates save all tapper portions

CTN :45572401

09 Jul, 2026 NA

Tiruvannamalai - Tamil Nadu

Tender For old set evaporate condensate pump rc no 7019/ps/bac/2026 - old set evaporate condensate pump, old set evaporator condensate pump model : cd 80-50-320 size : 80 x 50 mm discharge : 50 m /hr head : 20 m hp : 10 rpm : 1440 moc : casing cast iron,impeller :ss 304 shaft : ss410 sleeve : ss410 h & g bare pump , syrup pump model : cd 100-65-320 size : 100 x 65 mm discharge : 50 m /hr; head :30mtr hp : 20 rpm : 1440 moc : casing ss 304,impeller :ss 304 (closed type) shaft : ss410 sleeve : ss410 h & g , mud pump model : 80 bc-320 size : 100 x 80 mm discharge : 30 m /hr head : 20 m hp/rpm : 25/1440 moc : body ss 304,impeller :ss 304 (closed type) shaft : ss410 sleeve : ss410 h & g , lime pump type : horizontal end section(semi open impeller) model : cd 65-40-320 size : 65 x 40 mm motor recommended :3.7 kw/1450 rpm liquid handled : milk of lime shaft sealing : gland packed mol temperature : 70 degree centigrade mol density :1.162 kg/m3 discharge : 4.5 m /hr head : 25 m hp/rpm : 25/1440 moc : casing ss 304,impeller :ss 304 shaft c45 sleeve : ss410 h & g

Corporations And Associations And Others

CTN :45589992

01 Jul, 2026 NA

Jalandhar - Punjab

Tender For calendria of ms tube plate 4th body evaporator

CTN :45557689

26 Jun, 2026 NA

Delhi - Delhi

Tender For electron beam evaporation system

CTN :45540400

19 Jun, 2026 NA

Parganas - West Bengal

Tender For spare parts for kraz veh - pipe assy air cyl to brak valveof frt br part no 256b13506241, pipe assy from air cyl to brake valve of part no 256b13506245, pipe assy from air cyl to manual c/valve part no 255b13506255, pipe assy from air cyl to single safety part no 255b13506249, pipe assy from anti freeze evaporator to part no 255b1350620710, pipe assy to horn part no 255bt3721045a, pipe assy to lh front brake cyl part no 255b13506281, plug drain cock part no 256b1101078, protecting bushing part no 255b3408065, qtr glass hinges(rubber) part no dmd-niv-3767, qtr glass lock part no niv, qtr glass rubber part no nk, rifle stand base part no dmd-nk-4009, rifle stand clamp assy part no dmd-nk-4010, ring sealing brg(winch p/shaft) part no 53a2201122, rod sealing part no 214b1310172, rod, strip hold down part no nk, roller bearing gp37611/7611k part no 255b2304020, rubber plate bty box part no nk, run channel beeading part no nk, seal part no 256b3405178, seat back assy/back rest assy seat part no 256b6900200, seat cushion part no 256b6800110, strap hold down part no 255b3703162b, strip weather drop glass part no niv, tail light mtg plate with guard part no nk, thin alluminium flat channel 1/2", l-16 part no nk, trailer plug socket ps-300a(2143730010) part no ps300a3723100, tube air cross to rear axle right brakec part no 214b3506310a, tube assy lh part no 255b4224085b, washer part no 2102919038a, weather strip wind shield part no 2145206050, rear pipe assy from compr to washer part no 256b13506201, shaft clutch part no 236n1701027b, bolt (front road spring) part no 2000817p29, bolt m 14x50 part no 201593p29, cabin floor supporting part no nk, gasket part no 255b8500046, pin part no 260088p18cp29, pin clip part no 256b110111520, gland yoke part no nk, handle inside door part no 2146105182, hatch cover part no 2361601030a, cylinder b 20 part no 256b3513015, cylinder b-40 part no 2503513015, valve, tyre pressure ctrl part no 11312200901, adaptor rear coupling head part no nk, angle plate foot step body part no 255b8506315, ball brg dia 3/8"(200-1702083)/ball dete part no lv6/mt73110002694, bracket holder cam part no 255b3909107, bracket, handle part no 2561108288b, channel upper drop glass part no 2146108255b, corrogated ring support (aps) part no nk, door outer handle part no 2146105152, holder oil seal cross part no 514919, holder oil seal slip yoke part no 522201087, key/wood ruff part no 347013p2, lamp part no 6240001209, pin shoe f/b part no 2003501132a, pipe to pressure gauge part no 255b1383004410, rod bonnet holding stand part no nk, rod tie door latch comp part no 6105102, roller pin angle distance piece part no nk, seal part no 255b3104036, shim 0.1mm/gasket part no 2144501098, spring (aps) part no nk, turn indicator relay part no 2143726030, union outer thread part no 347464p29, cleaner, air part no 2381109012, wing nut, slotted link part no 2125204024a2

State Government

CTN :45463233

16 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of rubber molded goods - moulded rubber goods, neoprene rubber square suitable to stand temp.200 c for juice heater size 5/8 x 5/8 , rubber square suitable to stand temp.200 c for v. line juice heater size 1/2" x 1/2", nitrile rubber seat for angle valve of juice heater suitable to stand temp.200 c, as per drg no. ksc/bh/296/02, nitrile rubber seat for double beat valve of juice heater size 240mm od x 94mm bore x 18 mm thick, neoprene rubber taper plug for evaporator tubesize: 37mm x 40mm as per drg.no. ksc/286/02, nitrile rubber seat for vapour angle valve (inlet of 4th evaporator body) suitable to stand at 200 c temp. as per drg.no.ksc/evp/97/2001 fig no.1, nitrile rubber seat for main exhaust valve of semi kestner as per our drawing no. ksc/bh/7898 fig. no. 1, nitrile rubber seat for surplus exhaust angle valve of semi kestner suitable to stand at 280 c as per drg. no.ksc/bh/7899 fig no. 3, nitrile rubber seat for outlet vapur valve of s.k. suitable to stand at 280 c as per drg. no. ksc/bh/7899 fig.-1, nitrile rubber seat for angle valve (inlet exhaust valve of v.cell) suitable to stand at 280 c as per drg. no. ksc/bh/8607 fig.-1, nitrile rubber seat for pan exhaust valve to stand at 260 c as per drg.no.ksc/bh/7899 fig no. 2, nitrile rubber seat for exhaust/vapour angle valve for pan no. 1, 3, 8 & 10 as per dr g. no. ksc/boil/221, fig. no. 1, fig. no. 2, fig. no. 3, fig. no. 4, nitrile rubber seat for discharge valve of pan no. 6 & 7 as per drg. no.ksc/8608, nitrile rubber seat for discharge valve of pan no. 9 & 10 as per drg. no.ksc/8609, nitrile rubber seat for discharge valve of pan no. 8 as per drg. no.ksc/1022, synthetic rubber joint for main hole of pan 3, 4 & 5 size 517 od x 443 bore x 13 thick., synthetic rubber joint for main hole of pan 1, 2, 3,6, 7, 8, 9 & 10 size 26" od 12" bore 6 mm thick, synthetic rubber joint for pan condenser main hole (a) size 22"od, 12"bore, 6mm thick,, (b) 28"od,12"bore, 6mm thick, synthetic rubber joint for evaporator man hole od 19.11/16 bore 18. 7/16 & 5/8" thick, nitrile rubber seat for double beat valve of juice heatersize 240 mm od x 94 mm bore x 21 mm thick, nitrile rubber seat for double beat valve of juice heatersize 230 mm od x 94 mm bore x 21 mm thick, synthetic rubber ring suitable to stand at 150 ctemp. & 200 psi dia(inch.) bore(inch) thickness(mm), 22 12 6, 24 12 6, 26 12 6, 28 12 6, 30 12 6, 36 18 6, 48 40 6, 54 46 6, synthetic rubber ring joint suitable to stand at 150 c temp. and 200 psi for sight glasses of pan & evaporator dia(mm.) bore(mm) thickness(mm), 230 180 6, 220 180 6, 210 165 2, 222 195 2, 218 190 2, 170 130 6, 150 110 6, neoprene rubber star for cane un-loader as per drg.no.ksc/cr/311286 size : 6", neoprene rubber star for cane un-loader as per drg.no.ksc/cr/17982 size : 9", rubber bushes, o.d.(inch) bore(inch) length(inch), 5/8 1, 7/8 1, 1 1, 1.1/4 1/2 1.1/2, 1.1/4 5/8 1, 1.1/4 1.1/4, 1.1/4 7/8 2, 1.1/2 1.1/4, 1.1/2 1.1/2, 1.1/2 7/8 1.3/4, 2 2, 2 7/8 2, 2 1 2, 2 1.1/2 7/8, 1 1/2" 3/4" 2", 2.1/2 1.1/4 2.1/2, 1 1/2 1, 1 1/2 1 1/4, 1 1/4 5/8 1 1/2, 1 1/4 3/4 1 1/2, 1 1/4 1/2 1 1/4, 1 1/2 3/4 2, 1/2 3/4 2, 1/2 5/8 1 1/2, spares for t.e.w. make type 36 dia juice clarifier, mud sealing ring as per sample/ drg., telescopic valve rubber ring as per sample/ drg., mud scraping rubber strip with wire netting size 32" x 5" x ", rubber seat for molasses weighing scale size- 14 dia, thickness- 16mm type ( silicon bitile rock hard rubber ), (a) rubber seat for water weighing scale (as per drawing ), (b) rubber seat for juice weighing scale (as per drawing ), neoprene rubber stoper(hard quality) for juice weighing scale 70/62 dia, 55 mm lenth as per drawing no-ksc/jk1/144, neopreme rubber seat for exhaust valve suitable for 200 0 c temerature as per drawing no : ksc/bh/1021, serial no 1 , od 510, id 365 mmthickness 40/15 mm, serial no 2 , od 555, id 380 mmthickness 40/15 mm, serial no 3 , od 655, id 480 mmthickness 40/15 mm, serial no

Evaporation System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

Central Government/Public Sector

Corporations And Associations And Others

State Government