Latest evaporator body Tenders | Government evaporator body Tenders

CTN :45455195

29 Jun, 2026 NA

Saharanpur - Uttar Pradesh

Tender For bid to ras supply of supply of new 640 m 2 h. s qb 1 evaporator body calendria with bottom saucer

State Government

CTN :45263804

01 Jul, 2026 4.63 Crore

Panchkula - Haryana

Tender For corrigendum : tender for the supply of various equipments - muffle furnace, "al2o3 sample plate, al2o3 furnace door block, protection glove, crucible clip, crucibles, karl fischer titrator, "titration vessel, detector electrode with lead, generator electrode (with frit) with lead, desiccant tube and cap, injection septa (pack of 10), gas tight syringe 1.0ml , luer needle 17-gauge, dust cover, results manager software, main power pack, fuse, karl fischer titration reagent(s), nist calibration standard, refrigerated centrifuge (bench top), bottles/falcon tubes/adapters for 0.2ml tubes, one set of other items (adapters) required for improving the applicability/system performance should to be quoted, nitrogen evaporator, evaporation tubes, gas fuse , water purification system including water softner, cartridges, filters etc. for , bomb calorimeter, "ignition wire, cotton thread, combustion crucible, bomb, nist certified benzoic for calibration, any other accessories required for analysis of food samples., gas chromatograph with ecd, tcd, fid with autosampler, "pesticide column (30 m x 0.250mm x 0.25m (5ms (95% dimethyl-, 5% diphenyl-polysiloxane / 1ms (100% dimethyl polysiloxane or equivalent) 100 mm column for fatty acid profiling with main concern of trans fatty acid application, column for cholesterol application, stationary phase: 95% dimethyl-, 5% diphenyl-polysiloxane (30 m x 0.250mm x 0.25m),, "vial sets (1, 2 ml, crimp type, amber and clear glass), vials (10, 20ml crimp type with cap & septa), 300/500 l recovery vials, septa ptfe/silicone (for 1, 2 ml vials), septa ptfe/silicone (for 10, 20 ml headspace vials), ergonomic crimping tools for different vial types, ergonomic decapping tools for different vial types, head space vials 10,20 ml capacity, suitable syringes for quoted autosampler, suitable headspace syringe /valve/loop, quechers kits for pesticides and herbicides in following matrices:, matrices with high fat, matrices with high water content, matrices with high pigmented, spe cartridges for water., ultra performance liquid chromatography (uplc) with photodiode array (pda), fluorescence (fld) and refractive index detector (rid), sample vials with 1.5 ml or greater, stainless steel ultra sonic bath with the capacity of 5 l or more, with time setting (min) 1-30min or continuous operation with led and push button (should be ip 33 protection class) for sonication of spare parts as well as solvents, fittings, frits, ferules and tubings, tubing cutter, solvent bottles (1000 ml capacity), solvent filters (glass & ss both, compatible manual syringes -10 l, 20 l, 50 l, standards for hplc calibration for pda, ri and fluorescence detector, consumables required for each detector must be provided., "hplc columns: one each of, c8 = 250 4.6 5m c18 = 250 4.6 5m, cyano = 250 4.6 5m. amino = 250 4.6 5m, phenyl = 250 4.6 5m. silica = 250 4.6 5m., all columns must be supplied with respective guard column and holder. ", uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., ft-ir with atr & liquid cell, " hydraulic press with kbr die and pellet holder, suitable mortar pestle (dia 5-6 cm), suitable portable de humidifier to maintain 30- 60% rh, temperature and relative humidity digital indicator with calibration certificate from iso 17025 accredited lab., reference nist standard polystyrene film (0.3 mm) over the range of 3800 cm-1 to 650 cm-1., abbes r

CTN :45634156

01 Jul, 2026 45.51 Lacs

Jodhpur - Rajasthan

Tender For tender for e procurement of supply and installation of equipment and machinery in dtl lab dsrrau jodhpur =- milli-q water assembly, microwave digester, centrifuge (6000-10000 rpm), vortex, digital refractometer, digital ph meter, de-humidifier, tablet disintegration apparatus, hot air oven, mixture grinder, magnetic stirrer with hot plate , melting & boiling point apparatus, sieve shaker (brass), laminar air flow, autoclave apparatus , orbital shaker, hot plate, nitrogen evaporator , laboratory fume hood, fume exhaust blower unit.

CTN :45639270

01 Jul, 2026 45.51 Lacs

Jodhpur - Rajasthan

Tender For tender for e procurement of supply and installation of equipment and machinery- milli-q water assembly, microwave digester, centrifuge (6000-10000 rpm), vortex, digital refractometer, digital ph meter,dehumidifie,tablet disintegration apparatus, hot air oven, mixture grinder, magnetic stirrer with hot plate, melting & boiling point apparatus, sieve shaker (brass), laminar air flow, autoclave apparatus, orbital shaker,hot plate, nitrogen evaporator , laboratory fume hood , fume exhaust blower unit. in dtl lab dsrrau jodhpur.

State Government

CTN :45463233

16 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of rubber molded goods - moulded rubber goods, neoprene rubber square suitable to stand temp.200 c for juice heater size 5/8 x 5/8 , rubber square suitable to stand temp.200 c for v. line juice heater size 1/2" x 1/2", nitrile rubber seat for angle valve of juice heater suitable to stand temp.200 c, as per drg no. ksc/bh/296/02, nitrile rubber seat for double beat valve of juice heater size 240mm od x 94mm bore x 18 mm thick, neoprene rubber taper plug for evaporator tubesize: 37mm x 40mm as per drg.no. ksc/286/02, nitrile rubber seat for vapour angle valve (inlet of 4th evaporator body) suitable to stand at 200 c temp. as per drg.no.ksc/evp/97/2001 fig no.1, nitrile rubber seat for main exhaust valve of semi kestner as per our drawing no. ksc/bh/7898 fig. no. 1, nitrile rubber seat for surplus exhaust angle valve of semi kestner suitable to stand at 280 c as per drg. no.ksc/bh/7899 fig no. 3, nitrile rubber seat for outlet vapur valve of s.k. suitable to stand at 280 c as per drg. no. ksc/bh/7899 fig.-1, nitrile rubber seat for angle valve (inlet exhaust valve of v.cell) suitable to stand at 280 c as per drg. no. ksc/bh/8607 fig.-1, nitrile rubber seat for pan exhaust valve to stand at 260 c as per drg.no.ksc/bh/7899 fig no. 2, nitrile rubber seat for exhaust/vapour angle valve for pan no. 1, 3, 8 & 10 as per dr g. no. ksc/boil/221, fig. no. 1, fig. no. 2, fig. no. 3, fig. no. 4, nitrile rubber seat for discharge valve of pan no. 6 & 7 as per drg. no.ksc/8608, nitrile rubber seat for discharge valve of pan no. 9 & 10 as per drg. no.ksc/8609, nitrile rubber seat for discharge valve of pan no. 8 as per drg. no.ksc/1022, synthetic rubber joint for main hole of pan 3, 4 & 5 size 517 od x 443 bore x 13 thick., synthetic rubber joint for main hole of pan 1, 2, 3,6, 7, 8, 9 & 10 size 26" od 12" bore 6 mm thick, synthetic rubber joint for pan condenser main hole (a) size 22"od, 12"bore, 6mm thick,, (b) 28"od,12"bore, 6mm thick, synthetic rubber joint for evaporator man hole od 19.11/16 bore 18. 7/16 & 5/8" thick, nitrile rubber seat for double beat valve of juice heatersize 240 mm od x 94 mm bore x 21 mm thick, nitrile rubber seat for double beat valve of juice heatersize 230 mm od x 94 mm bore x 21 mm thick, synthetic rubber ring suitable to stand at 150 ctemp. & 200 psi dia(inch.) bore(inch) thickness(mm), 22 12 6, 24 12 6, 26 12 6, 28 12 6, 30 12 6, 36 18 6, 48 40 6, 54 46 6, synthetic rubber ring joint suitable to stand at 150 c temp. and 200 psi for sight glasses of pan & evaporator dia(mm.) bore(mm) thickness(mm), 230 180 6, 220 180 6, 210 165 2, 222 195 2, 218 190 2, 170 130 6, 150 110 6, neoprene rubber star for cane un-loader as per drg.no.ksc/cr/311286 size : 6", neoprene rubber star for cane un-loader as per drg.no.ksc/cr/17982 size : 9", rubber bushes, o.d.(inch) bore(inch) length(inch), 5/8 1, 7/8 1, 1 1, 1.1/4 1/2 1.1/2, 1.1/4 5/8 1, 1.1/4 1.1/4, 1.1/4 7/8 2, 1.1/2 1.1/4, 1.1/2 1.1/2, 1.1/2 7/8 1.3/4, 2 2, 2 7/8 2, 2 1 2, 2 1.1/2 7/8, 1 1/2" 3/4" 2", 2.1/2 1.1/4 2.1/2, 1 1/2 1, 1 1/2 1 1/4, 1 1/4 5/8 1 1/2, 1 1/4 3/4 1 1/2, 1 1/4 1/2 1 1/4, 1 1/2 3/4 2, 1/2 3/4 2, 1/2 5/8 1 1/2, spares for t.e.w. make type 36 dia juice clarifier, mud sealing ring as per sample/ drg., telescopic valve rubber ring as per sample/ drg., mud scraping rubber strip with wire netting size 32" x 5" x ", rubber seat for molasses weighing scale size- 14 dia, thickness- 16mm type ( silicon bitile rock hard rubber ), (a) rubber seat for water weighing scale (as per drawing ), (b) rubber seat for juice weighing scale (as per drawing ), neoprene rubber stoper(hard quality) for juice weighing scale 70/62 dia, 55 mm lenth as per drawing no-ksc/jk1/144, neopreme rubber seat for exhaust valve suitable for 200 0 c temerature as per drawing no : ksc/bh/1021, serial no 1 , od 510, id 365 mmthickness 40/15 mm, serial no 2 , od 555, id 380 mmthickness 40/15 mm, serial no 3 , od 655, id 480 mmthickness 40/15 mm, serial no

State Government

CTN :45228153

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of rubber molded goods - moulded rubber goods, neoprene rubber square suitable to stand temp.200 c for juice heater size 5/8 x 5/8 , rubber square suitable to stand temp.200 c for v. line juice heater size 1/2" x 1/2", nitrile rubber seat for angle valve of juice heater suitable to stand temp.200 c, as per drg no. ksc/bh/296/02, nitrile rubber seat for double beat valve of juice heater size 240mm od x 94mm bore x 18 mm thick, neoprene rubber taper plug for evaporator tubesize: 37mm x 40mm as per drg.no. ksc/286/02, nitrile rubber seat for vapour angle valve (inlet of 4th evaporator body) suitable to stand at 200 c temp. as per drg.no.ksc/evp/97/2001 fig no.1, nitrile rubber seat for main exhaust valve of semi kestner as per our drawing no. ksc/bh/7898 fig. no. 1, nitrile rubber seat for surplus exhaust angle valve of semi kestner suitable to stand at 280 c as per drg. no.ksc/bh/7899 fig no. 3, nitrile rubber seat for outlet vapur valve of s.k. suitable to stand at 280 c as per drg. no. ksc/bh/7899 fig.-1, nitrile rubber seat for angle valve (inlet exhaust valve of v.cell) suitable to stand at 280 c as per drg. no. ksc/bh/8607 fig.-1, nitrile rubber seat for pan exhaust valve to stand at 260 c as per drg.no.ksc/bh/7899 fig no. 2, nitrile rubber seat for exhaust/vapour angle valve for pan no. 1, 3, 8 & 10 as per dr g. no. ksc/boil/221, fig. no. 1, fig. no. 2, fig. no. 3, fig. no. 4, nitrile rubber seat for discharge valve of pan no. 6 & 7 as per drg. no.ksc/8608, nitrile rubber seat for discharge valve of pan no. 9 & 10 as per drg. no.ksc/8609, nitrile rubber seat for discharge valve of pan no. 8 as per drg. no.ksc/1022, synthetic rubber joint for main hole of pan 3, 4 & 5 size 517 od x 443 bore x 13 thick., synthetic rubber joint for main hole of pan 1, 2, 3,6, 7, 8, 9 & 10 size 26" od 12" bore 6 mm thick, synthetic rubber joint for pan condenser main hole (a) size 22"od, 12"bore, 6mm thick,, (b) 28"od,12"bore, 6mm thick, synthetic rubber joint for evaporator man hole od 19.11/16 bore 18. 7/16 & 5/8" thick, nitrile rubber seat for double beat valve of juice heatersize 240 mm od x 94 mm bore x 21 mm thick, nitrile rubber seat for double beat valve of juice heatersize 230 mm od x 94 mm bore x 21 mm thick, synthetic rubber ring suitable to stand at 150 ctemp. & 200 psi dia(inch.) bore(inch) thickness(mm), 22 12 6, 24 12 6, 26 12 6, 28 12 6, 30 12 6, 36 18 6, 48 40 6, 54 46 6, synthetic rubber ring joint suitable to stand at 150 c temp. and 200 psi for sight glasses of pan & evaporator dia(mm.) bore(mm) thickness(mm), 230 180 6, 220 180 6, 210 165 2, 222 195 2, 218 190 2, 170 130 6, 150 110 6, neoprene rubber star for cane un-loader as per drg.no.ksc/cr/311286 size : 6", neoprene rubber star for cane un-loader as per drg.no.ksc/cr/17982 size : 9", rubber bushes, o.d.(inch) bore(inch) length(inch), 5/8 1, 7/8 1, 1 1, 1.1/4 1/2 1.1/2, 1.1/4 5/8 1, 1.1/4 1.1/4, 1.1/4 7/8 2, 1.1/2 1.1/4, 1.1/2 1.1/2, 1.1/2 7/8 1.3/4, 2 2, 2 7/8 2, 2 1 2, 2 1.1/2 7/8, 1 1/2" 3/4" 2", 2.1/2 1.1/4 2.1/2, 1 1/2 1, 1 1/2 1 1/4, 1 1/4 5/8 1 1/2, 1 1/4 3/4 1 1/2, 1 1/4 1/2 1 1/4, 1 1/2 3/4 2, 1/2 3/4 2, 1/2 5/8 1 1/2, spares for t.e.w. make type 36 dia juice clarifier, mud sealing ring as per sample/ drg., telescopic valve rubber ring as per sample/ drg., mud scraping rubber strip with wire netting size 32" x 5" x ", rubber seat for molasses weighing scale size- 14 dia, thickness- 16mm type ( silicon bitile rock hard rubber ), (a) rubber seat for water weighing scale (as per drawing ), (b) rubber seat for juice weighing scale (as per drawing ), neoprene rubber stoper(hard quality) for juice weighing scale 70/62 dia, 55 mm lenth as per drawing no-ksc/jk1/144, neopreme rubber seat for exhaust valve suitable for 200 0 c temerature as per drawing no : ksc/bh/1021, serial no 1 , od 510, id 365 mmthickness 40/15 mm, serial no 2 , od 555, id 380 mmthickness 40/15 mm, serial no 3 , od 655, id 480 mmthickness 40/15 mm, serial no

Central Government/Public Sector

CTN :45098704

22 May, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of calibration of deep freezer , calibration of muffle furnace , calibration of hot air oven , calibration of centrifuge , calibration of sonicator , calibration of analytical weighing balance , calibration of vortex mixer , calibration of water bath , calibration of pipettes , calibration of beaker 50 ml , calibration of beaker 100 ml , calibration of beaker 250 ml , calibration of beaker 500 ml , calibration of beaker 1000 ml , calibration of volumetric flask 25 ml , calibration of volumetric flask 50 ml , calibration of volumetric flask 100 ml , calibration of volumetric flask 250 ml , calibration of volumetric flask 500 ml , calibration of volumetric flask 1000 ml , calibration of measuring cylinders 25 ml , calibration of measuring cylinders 50 ml , calibration of measuring cylinders 100 ml , calibration of measuring cylinders 250 ml , calibration of measuring cylinders 500 ml , calibration of measuring cylinders 1000 ml , calibration of conical flask 25 ml , calibration of conical flask 50 ml , calibration of conical flask 100 ml , calibration of conical flask 250 ml , calibration of conical flask 500 ml , calibration of conical flask 1000 ml , calibration of thermocouple , calibration of hygrometer , calibration of digital thermometer , calibration of tacometer , calibration of ph meter , calibration of sieve no 1 mm , calibration of sieve no 1.70 mm , calibration of sieve no 4.75 mm , calibration of nitrogen generator , calibration of nitrogen evaporator

Central Government And Public Sector

CTN :45084910

26 May, 2026 NA

Hyderabad-T - Telangana

Tender For supply of nitrogen evaporator (turbo vap)

Central Government/Public Sector

CTN :45063362

01 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of nitrogen evaporator

Central Government/Public Sector

CTN :44875867

30 Apr, 2026 7.72 Lacs

East Singhbhum - Jharkhand

Tender For corrigendum : tender for supply of annual maintenance for split type 1.5 ton air conditioner (total no of a.c units -104nos incl 1 no inverter ac hence total no of a.c units for two years -208 nos ) , annual maintenance for water cooler storage type 150lph(total no of water cooler units - 07nos , hence total no of water cooler units for two years - 14 nos ) , annual maintenance for water cooler storage type 40ltrs/hr(total no of water cooler units - 08nos hence total no of water cooler units for two years - 16 nos ) , supply of new compressor of reputed make carrier / emerson / godrej / lg/ kirloskar/cope land /tecumsch for 1.5ton split type and window type air conditioner with accessories and its installation in place of defective one in the a.c unit including gas charging nitrogen flashing washing etc as required (reciprocating type) , supply of new compressor of reputed make carrier / emerson / godrej / lg/ kirloskar/cope land /tecumsch for 1.5ton split type and window type air conditioner with accessories and its installation in place of defective one in the a.c unit including gas charging nitrogen flashing washing etc as required , rotary type , supply of new compressor of reputed make for water cooler of capacity from 40 ltrs to 150ltrs with accessories and its installation in place of defective one in the cooler including gas charging nitrogen flashing washing etc as required , supply and replacement of microprocessor unit in 1.5 ton split type and window type a.c , supply & installation of brass valve used in split type and window type ac (5/8inch) , supply & installation of brass valve used in split type and window type ac (1/2inch) , supply & installation of brass valve used in split type and window type ac (1/4inch) , supply of refrigerant in own certified cyclinder & charging in a.c units (feron / mefron - 22) , supply and installation of outdoor unit (without compressor) make voltas / lg / cruiser / camipro for 1.5 ton split a.c including dismantling etc as required , supply and installation of indoor unit complete with remote controller make- cruiser/voltas/l.g /camipro for 1.5 ton split type a.c of reputed make , supply and replacement of remote controller make- voltas /lg/samsung/ajure/cruise/carrier/bluestar / equivalent of 1.5 ton split type & window type a.c , supply and installation of blower fan motor , make- hitachi / marathon / ge /baba/frag master of same rating as mentioned on faulty one for window type a.c units , supply and installation of condenser / evaporator unit for 1.5ton window type a.c units , supply and installation of runner for 1.5ton window type a.c unit , supply and installation of condenser motor fan for window a.c units , supply and installation of capillary tube for window a.c units

Evaporator Body Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector