Latest excavator bucket Tenders | Government excavator bucket Tenders

CTN :45692725

15 Jul, 2026 11.74 Lacs

Multi City - Multi State

Tender For invitation of quotation for cat a spares for ace excavator cum backhoe loader ax130 - main fuel filter cartridge, filter element, oil filter, air filter element outer, air filter element inner, master cylinder, rock tooth-(wt-3.1 kg-), plough bolt-3/4" unf-2b,l=70mm, nut hex 3/4" unf, side cutter lh, side cutter rh, bush excavator bucket, pad kit, brake caliper, a spider (kit-149582), brake disc, drive plate 2 136644, drive plate, brake drive plate, pump high pressure, injector, turbocharger (4 cylinder tier, spare seal kit, spring brake padel, fuel suction strainer, wheel hub kit, cassette seal, bearing, a studv, nut, doc bs4

State Government

CTN :45466096

15 Jun, 2026 30.00 Lacs

Siwana - Rajasthan

Tender For annual rate contract for provding new water service connection with material under division siwana - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement fo

CTN :45444686

19 Jun, 2026 6.00 Lacs

Bhopal - Madhya Pradesh

Tender For providing and supplying of material as per enclosed list -carpet grass, seasonal plants (1 ft), foxtail palm (12–13 ft & 5–6 ft), zami (1–2 ft), creeper/vine (2–3 ft), areca palm (3–4 ft & 12–13 ft), ashoka pendula (3–5 ft), bougainvillea (1–2 ft), ficus (1–2 ft), water palm (3–5 ft), kaner/oleander (3–5 ft), jasvan/hibiscus (3–5 ft), neem (3–5 ft), banyan (5–6 ft), bamboo (3–5 ft), mango (3–5 ft), jamun (3–5 ft), peepal (3–5 ft), gulmohar (3–5 ft), mixed manure, cow dung manure, brick bed construction, bricks, nylon rope (0.5 inch & 1.0 inch), paint (liquid/distemper), wall putty, lime, threaded pipes, pvc pipe (20mm & 50mm), pickaxe, spade, pan/basin (tagari), sickle, axe, rose pruner, large shears/grass cutter, gloves, pick-mattock, hand trowel, crowbar, black soil, pit-digging machine, grass cutting machine, raincoat, umbrella, rcc pots (14", 16", 18").

CTN :45418289

11 Jun, 2026 4.17 Lacs

Multi City - Telangana

Tender For supply and delivery of nursery maintenance materials in sircilla municipality- axe , bamboo sticks , cock pit , coconute grooms (400 grms) , cultivator (5 fingers) , danthelu (big size) , danthelu (small size) , digging machine , gadda para , garden hose pipe (0.5 inch) , garden hose pipe (1 inch) , green shade net (90% uv protected) , hand gloves , hand throwel (thapi) , kamma kathulu , kodavallu with wooden handle , konkalu with wooden handle , lawn cutter , leaf cutter (big size) , leaf cutter (small size) , paralu , plant bags (12x12 size) , plant bags (5x4 size) , plant bags (5x7 size) , plant bags (6x8 size) , plant bags (8x10 size) , plastic tubs (small size) , root powder , rose cans , seeds , thattalu , urea

Central Government/Public Sector

CTN :45098288

04 Jun, 2026 7.18 Crore

Chandrapur - Maharashtra

Tender For corrigendum : supply of boom cylinder assy oem part no 175hcb0015 applicable for be1000-bh hyd excavator , arm cylinder assy oem part no 175hc01101 applicable for be1000-bh hyd excavator , bucket cylinder assy oem part no 175hc01118 applicable for be1000-bh hyd excavator , swing brake assy oem part no 817so03029 applicable for be1000-bh-fl hyd excavator , swing pump assy oem part no 817hm01035 applicable for be1000-bh-fl hyd excavator , boom cylinder lh oem part no 160hc01008 applicable for be300 hyd excavator , arm cylinder assy oem part no 160hc01065 applicable for be300 hyd excavator , bucket cylinder assy oem part no 160hc01032 applicable for be300 hyd excavator , final drive assy oem part no 157fd01038 applicable for be300 hyd excavator , hydraulic pump oem part no 157hm02005 applicable for be300 hyd excavator , swing motor oem part no 157hm02021 applicable for be300 hyd excavator , hydraulic pump oem part no 955hs02312 applicable for bh60m dumper , steering pump oem part no 955hs02183 applicable for bh60m dumper , steering cylinder assembly oem part no tx7632 applicable for bh60m dumper , steering control oem part no pb8894 applicable for bh60m dumper , power take off assy oem part no 955hs02248 applicable for bh60m dumper , front suspension assy oem part no 958su01003 applicable for bh60m dumper , bh-60t rear suspension assy oem part no 958su01011 applicable for bh60m dumper , out put shaft assly qsk-19c oem part no 958pi02019 applicable for bh60m dumper , steering pump oem part no 125hm01029 applicable for d155 dozer , hydraulic pump oem part no 125hm01037 applicable for d155 dozer , transmission pump assly oem part no 125hm01004 applicable for d155 dozer , lift cylinder assly lh oem part no 125hc01018 applicable for d155 dozer , lift cylinder assly rh oem part no 125hc01026 applicable for d155 dozer , tilt cylinder assy oem part no 125hc01001 applicable for d155 dozer , strg. clutch assy oem part no 1752200033 applicable for d155 dozer , strg. clutch assy oem part no 130cs02006 applicable for d355 dozer , hyd pump oem part no 787hs02665 applicable for ws28-2 water sprinkler , front suspension oem part no 640000478300 applicable for ws28-2 water sprinkler , rear suspension oem part no 778su01102 applicable for ws28-2 water sprinkler //bid details 2 / 35

corporations/Associations/Others

CTN :45299281

29 May, 2026 27.58 Lacs

Nellore - Andhra Pradesh

Tender For supply & delivery of 3 dx plus 2wd-powered by 430,stage 5 engine, 4cylinder, water cooled, turbo charged with egr and after treatment system doc and dpf loader with 1.1cum & excavator bucket 0.26 cum.diesel engine of 55kw(74hpl @2200rpm,max torque 440 nm@1150rpm and displacement of 3.0l, hydraulic pump flow 114 ipm at 2000 rpm and system pressure is 3915 p.s.i

CTN :45294708

08 Jun, 2026 2.07 Crore

Gwalior - Madhya Pradesh

Tender For supply of 05 nos. 3dx (6 in 1) excavator cum bockhoe loader vehicle with 1.1 cum or equivalent loader bucket capacity and 0.26 cum or eq. excavator bucket capacity with rto registration at rto gwalior, 01 year zero dep. insurance, one year under warr

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

CTN :45234140

01 Jun, 2026 10.00 Lacs

West Nimar - Madhya Pradesh

Tender For the work of digging pits by tractor driven pit digging machine for tree plantation at various places within the municipal area.(including diesel driver)