Latest exhaust duct Tenders | Government exhaust duct Tenders

corporations/Associations/Others

CTN :42063030

06 Oct, 2025 1.00 Crore

Kashipur - Uttarakhand

Tender For supply of electric slaughterhouse (for animals) - primary & secondary chamber primary chamber* single chmber furnace of size 4270 mm x 1980 mm x 1820 mm.* plate thickness- 5 to 8 mm.* lining of interior of furnace- 400 mm wall cermaic blanketk, high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006* operation temperature- 800o c to 1000o c.* top smoke discharge for secondary chamber.* ash removal doors to be provided for ash collection after combustion.* ingtion- automatic.* temperature control- automatic* material loading- front gate- automaticsecondary chamber* operating temperature - 1050o c to 1250o c.* material of construction- mild steel with high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006.* made from is 2062 grade mild steel materials (or better) duty lined with insulation bricks, refractory bricks, hysil boards.* burner mounting arrangement with refractory burner block.furnace door:furnace door charging & discharging side fabricated from 5mm to 6 mm thickness door opening & closing automatic.ash door:* ash door (with casted cement lining) to remove nonhazardous ash from the chamber.* top inlet bottom smoke discharge for longer gas residence time.* furnace door charging & discharging side fabricated from 5mm to 6 mm thickness.* door opening & closing automatic/manual.refractory:{complete set of refractory shaped bricks for construction electric cremation of i.s. 8 bricks (approx. 1007nos bricks,insulation 4000 nos. refractory slid for construction of flue duct , as required, refractory heat resistant fire clay , ceramic blanket hysil board, asbestos ropes etc. as required for outer side of the furnace shall be constructed by red bricks by sand and cement as mortars and construction of chimney from basement of roof level including painting i.e. bricks portion shall be painted by two coats of red oxide as primer and to coats of synthetic enamel. (a) complete lining & assembling of entire cremation chamber according to standard size with proper arrangement of accommodation of heating elements, resting of dead body with sufficient opening for falling of ashes to the ash chamber & sufficient ventilation for fresh air spraying. (b) complete lining and assembling of entire cremation chamber according to standard size with provision of drawing out aces from the rear side and sufficient ventilation for fresh air injection. complete lining and assembling of entire cremation chamber according to the standard size with provision of air inlet supplying by fresh air blower and arrangement of multi ventilation path for fresh air}. osspl make, thermocouple heat sensor supply & fixing the thermocouple of heat sensing range 0 - 1200 c (cr.-al) sensor housed in s.s 304 casing of dimension 1200 mm long 22 mm od complete encased to and fitted terminal on other and for connection of compensating of 2 cores 0.5 aq. mm cr- al for heat sensing from thermocouple to temperature controller covered with asbestos embedded rope about 50 m length as per direction of eic., f.d. fan/centrifugal air blower with electric motor * supply and delivery at site, installation, testing and commissioing.* of fresh air injection system forced draft fan mild steel.* type: centrifugal.* capacity:- 500 cmh.* pressure:- 220 mmwg.* motor rating:- 2hp (kirloskar/crompton), burner assembly * total 2 nos. of lpg/cng/png fired automatic burner required.* the burner should be provided with comprising diffuser plate/ burner plate, photo cell housing electrodes with holding brackets, solenoid valve, electrodes caps, flexible hose pipes, spary nozzles, oil filter, blower, etc. connected with electric motor (each burner) & in built air regulator.* burners will work on auto on/off as per the set temperature for the combustion chambers.* the in-built bolwer will provide continuous air flow to the burners to prevent demages due to high temperature., supply and fixing of manifold with a p

CTN :42132622

17 Oct, 2025 NA

Mettur - Tamil Nadu

Tender For mtps-i -bm-unit-iii- aoh-2025-26 - flue gas duct - âaâ & âbâ sides-patch up works and other repair works between aph out let to esp inlet.

corporations/Associations/Others

CTN :42135926

17 Oct, 2025 NA

Mettur - Tamil Nadu

Tender For mtps i bm unit iii aoh 2025 26 flue gas duct a and b sides patch up works and other repair works between aph out let to esp inlet

State Government

CTN :42136907

28 Oct, 2025 49.45 Lacs

Jamnagar - Gujarat

Tender For supply and application of zinc rich paint for flue gas duct structure from air preheater out to chimney inlet in boiler unit no. 3 at sikka tps. - epoxy zinc rich anti-corrosion paint (90 percentage - 95 percentage zinc), zinc primer (epoxy base - 60 percentage zinc), thinner (g.p.) suitable for epoxy paint, charges for the application of zinc rich paint on flue gas duct structure from aph outlet to chimney of boiler unit no. 3 at sikka tps as per scope of works and instruction of eic

CTN :42127438

10 Nov, 2025 NA

Varanasi - Uttar Pradesh

Tender For supply of developmental tender exhaust duct

Central Government/Public Sector

CTN :42057164

17 Oct, 2025 44.00 Lacs

Jammu - Jammu And Kashmir

Tender For supply of laboratory furniture d d - wall bench ,wb - 1, size l 2025 mm x w 600 mm x h 900 mm , over head storage cabinet with frame structure size l 645 mm x w 350 mm x h 635 mm , corner bench ,cb - 1, size l 1030 mm x w 0900 mm x h 900 mm , wall bench ,wb - 2, size l 1525 mm x w 750 mm x h 900 mm , over head storage cabinet size l 720 mm x w 350 mm x h 635 mm , chemical storage cabinet ,csc, size l 750 x d 450 x h 2100 mm , wall bench ,wb - 3, size l 1525 mm x w 750 mm x h 900 mm , island bench ,ib - 1, size l 1550 mm x w 1500 mm x h 900 mm , wall mounted storage cabinet with frame structure size l 630 mm x w 350 mm x h 635 mm , low constant volume, lcv, type bench fume hood, size l 1800 x d 915 x h 2300 mm, for ac lab, , low constant volume, lcv, type bench fume hood, size l 1500 x d 915 x h 2300 mm, for ac lab , exhaust fan - one fan for 2 nos. 1800 mm, 1 nos. 1500 mm wide fume hood and 1 no. chemical storage cabinet , wall bench ,wb - 1, size l 4500 mm x w 750 mm x h 900 mm , wall mounted storage cabinet with frame structure size l 720 mm x w 350 mm x h 635 mm , wall bench ,wb - 1, size l 2800 mm x w 900 mm x h 900 mm , wall mounted storage cabinet with frame structure size l 670 mm x w 400 mm x h 600 mm , wall bench ,wb - 2, size l 2793 mm x w 750 mm x h 750 mm , over head storage cabinet size l 720 mm x w 400 mm x h 600 mm , low constant volume ,lcv, type bench fume hood,size l 1800 x d 915 x h 2300 mm, ,for ac lab, , exhaust fan - 1 nos. 1800 mm wide fume hood , low constant volume, lcv, type bench fume hood, size l 1800 x d 915 x h 2300 mm, for ac lab , exhaust fan - one fan for 2 nos. 1800 mm wide fume hood , wall bench ,wb - 1, size l 0800 mm x w 915 mm x h 900 mm , wall bench ,wb - 1, size l 7550 mm x w 750 mm x h 900 mm , wall bench ,wb - 2, size l 2050 mm x w 750 mm x h 900 mm , island bench ,ib - 1, size l 6800 mm x w 1500 mm x h 900 mm , chemical storage cabinet ,csc, size l 1000 x d 450 x h 1830mm , chemical storage cabinet ,csc, size l 1000 x d 450 x h 1830mm without exhaust system , wall bench ,wb - 3, size l 1775 mm x w 900 mm x h 750 mm , low constant volume ,lcv, type bench fume hood,size l 1500 x d 915 x h 2300 mm, ,for ac lab, , exhaust fan - one fan for 2 nos. 1500 mm wide fume hoods and 2 nos. chemical storage cabinets , wall bench ,wb - 4, size l 6800 mm x w 750 mm x h 900 mm , exhaust ducting in pp frp, round shape, construction, 3mm, 2mm, complete with necessary bends, reducers, t connections, supports, flanges, gaskets, nutbolts etc. , additional requirement the vendor has to shift and reinstall the furniture of items 1 to 25 of the paloura campus whenever the new academic block is ready at the main campus jagti , lab stools