Latest exhaust equipment Tenders | Government exhaust equipment Tenders

CTN :40610378

26 Jun, 2025 NA

Medak - Telangana

Tender For supply of led high bay light of 200 watt, 230v, 50hz, lumens/ watt> = 130, lamp housing pressure die cast al.

CTN :40347170

12 Jun, 2025 NA

Bardhaman - West Bengal

Tender For corrigendum : supply of led flood light 300 watt, as per is:10322 (part 5/section 5) : 2013. 1) housing-die cast alumi nium alloy 2) life span-60,000 hours 3) luminary efficiency %u2265 90% 4) driver- constant current type 5) voltage variation-110 v to 270 volt. 6) efficiency of driver - %u2265 85% 7) luminous efficacy %u2265 1 20 lumen/watt 8) cri- %u226570 8) color temperature- 6000k 9) power factor- %u22650.95 10) thd-<1 0% 11) ip-66 12) protection-external 10kv surge protection & internal 4kv surge protection, short circuit, over current, over voltage, over temperature. 13) warranty-5 years. [ warranty period: 60 months afte r the date of delivery ]

State Government

CTN :40602157

20 Jun, 2025 NA

Hooghly - West Bengal

Tender For supply and delivery of 90 watt led street light with pressure die cast aluminium housing ip66 protection road way luminarie with high power led as per the detail technical proposal specification and vendor list attached

State Government

CTN :40602184

13 Jun, 2025 NA

Hooghly - West Bengal

Tender For supply and delivery of 45 watt led street light with pressure die cast aluminium housing ip66 protection road way luminarie with high power led as per the detail technical proposal specification and vendor list attached

CTN :40568259

23 Jun, 2025 NA

Darjeeling - West Bengal

Tender For supply of locking pin , front roll , front axle , bushing , grease nipple for front roll , end cap , segment bolt , key washer , grease nipple , bolt for worn case cover , bolt for key washer , dust guard lh , dust guard rh , driving ring , hex bolt , spring washer , locking wire , die , pin lever , selector arm shaft , bolt , fulcrum pin , guide bolt , bolt for cover , stud , shim set , distance piece , bolt with nut and locking , distance washer , distance tube , nut and pin , bush , oil seal , set screw , rear clamp plate , main bearing housing , lock nut , inner distance piece , front clamping plate , cheese head bolt , clutch casing , clutch facing ring , cheese head bolt with nut , driving pin , clutch pressure ring , eye bolt , pin for clutch link , clamping plate , roller bearing , clutch link , clutch driver , pin for clutch casing bid number/ & ( * ) : gem/2025/b/6281668 dated/ + : 02-06-2025 bid document/ 2 2 1 / 53

Central Government/Public Sector

CTN :40330612

11 Jun, 2025 37.97 Lacs

Faizabad - Uttar Pradesh

Tender For corrigendum : tender for supply of supply of bakelite sheet with 1nos of 6a dp mcb and stud type connector suitable for 4cx 6sq mm cable complete as required. , supply of 25w led street light luminiare with pre die cast aluminium housing and ip 66 protection , pf greater than equal to 0.95 , thd less than 10 percent , cri greater than equal to 70 as per technical specification complete as required. , supply of lt power cable of 1.1 kv grade of following sizes aluminium conductor xlpe insulated pvc sheathed armoured cable confirming to is 7098 part-i-1988 with upto date ammendment as required. a) 3.5 c x 95 sq. mm , supply of lt power cable of 1.1 kv grade of following sizes 4c x 6sq.mm(copper conductor) , supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket , bend , couplers etc. conforming to is 14930 , part ii complete with fitting and cutting , jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. a) 63 mm dia (od-63 mm & id-50 mm nominal) , laying of one number pvc insulated and pvc sheathed/xlpe power cable of 1.1kv grade of following size in the existing rcc/gi/hume/metal/hdpe pipe etc. as required. a) above 35sq.mm and up to 95 sq mm , laying of one number pvc insulated and pvc sheathed/xlpe power cable of 1.1kv grade of following size in the existing rcc/gi/hume/metal/hdpe pipe etc. as required. b) up to 35 sq mm , supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. a) 3.5c x 95 sq.mm , supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. b) 4c x 6sq.mm(copper conductor) , itc of gi octagonal pole of following length in reinforced cement concrete 1 ratio 2 ratio 4 (1 cement 2 coarse sand 4 stone aggregate 40mm nominal size) foundation i/c excavation and refilling etc. complete as required a) 5 mtr. height , itc of 30w led street light luminiare on existing pole bracket i/c connection with 1.5sq.mm frls copper wire complete as required. , earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. , providing and fixing 25 mm x 5 mm g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut , bolt , spring , washer excavation and re-filling etc. as required. , earthing with g.i. earth pipe 4.5 metre long , 40 mm dia including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. , providing and laying earth connections , from earth electrode with 6 swg dia , g.i wire in 15mm dia , g.i pipe from earth electrode including connection with g.i. thimble excavation and re-filling as required. , providing and fixing 6 swg g.i. wire on surface or in recess for loop earthing alongwith the existing cable as required. , design , fabrication , supply , installation , testing & commissioning of outdoor feeder pillar , cubicle type , made out of 2 mm thick crca sheet , totally enclosed , ip 55 , free standing , floor mounting , dust and vermin proof , indoor , compartmentalised , suitable for operation on 3 phase and neutral , 415 v , 50 hz ac system , including internal wiring with suitable size wires/cable , interconnection , duly powder coated painting etc. , including supply & installation of following switchgears , metering instruments and accessories in the feeder pillar as required as per attached boq in atc , shifting of 5 mtr height str

CTN :40510054

09 Jun, 2025 NA

West Singhbhum - Jharkhand

Tender For supply of indoor type 18w led tube light fitting complete nos. luminaire with surface/ wall m ounted led batten with high pressure die-cast aluminum with adc 12 alloy housing or crca sheet (0.6 mm thick) powder coated to white colour suitable for 140-270v, cri 280, pf >= 0.90 at full load, colour temper ature 6000+500 k, working temperature -10 degree c to 50 degree c, luminaire efficacy>= 110 im/w, ip 2 0, surge protection- mov of 2.5 kv (on board), burning hours 2 50000 with all accessories with suitable arr angement for fixng on wall with all the accessories. the luminaire shall conform to is 10322-5-1 (2012) wit h latest amendment if any. driver type - constant current driver with short circuit & open circuit protection. the firm has to submit technical parameters as per annexure a of specification no. pcee/s/185/led/12/21/ rev-0, dec-2021. the complete luminaire shall have replacement guarantee for satisfactory performance a nd manufacturing defects for a period of 60 months from date of commissioning or 72 months from date of supply whichever is earlier. led based luminaire shall be conforming to specification no. cee/s/185/led/12 /21/rev-0, dec-2021. make: philips, bajaj, orient, surya, havells, crompton, syska, goldwyn. [ warranty p eriod: 72 months after the date of delivery ]

State Government

CTN :40495651

10 Jun, 2025 NA

Pune - Maharashtra

Tender For providing supplying and erecting various different electric material for 1 year at grampanchayat(fund) - electric material for 1 year, 11/4" gi pl pipe, 3/4 " gi pl pipe, g.i.pipe 1-2, g.i.pipe 1*1/2"r, 1.5mm polycab 90mtr, 1.5sqmm 3c cu flex wire, 16*4 c alu armd cable, 2.5 mm polycab /syska 90mtrs, 4.0 sq mm service wire heavy, 4 mm polycab 90 mtr, 6 sqmm x 2 c service wire, g.i.wire, wire 16sq mm 4c alu arm, 120w led driver 10amp, led chip 100w, led chip48w, led chip 50w, led driver 100w, led driver 36w, led driver 48w, led driver 60w, led driver 65w, mcb 63am/2p, mcb box 2way, mcb single pole, mcb s.p 40amp, meter box 2*2.5 gi, mnx45 240v contactor, mnx 50 contactor coil, mnx50 contactor l & t, 32amp single pole main switch, 50w led flood light, led flood 100w, led street light s40 30w, 1 x 36 lx pl street light fitting, 2 x 36 w pl alu fitting, led lamp 45w, led pll 18w, led solar street light 40w, led streetlight 36w, led streetlight 50w, 63a kitkat fuse, 63 amps /415 v smtp main switch, 48" ceiling fan, ballast 36/40w destello electronic, battery 12v, busbar 200a/415v, cable tie 100 mm, cable tie 300mm, crement pole clamp, fan 16 wallfan cromton, fan 24 crompton celling, finolex pl 36w cdl pl tube 36w 4 pin, flood light 100w, gic qt timer, hallogen fitting 500w, hallogen lamp 500w, halonix led lamp 09w, halonix led lamp 20w, halonix led lamp 50w, holder porcelain e27, holder pvc 36w pl, led streetlight 36w, led street light 48w, kit kat fuse 16a/415, led batten 20w, led batten 36w, plier 8" taparia, pvc tapes/g 8mtr, rawal plug 25*8, rawal plug 35*8, screw 25*8, screw 35*8, screw 75*8, service insulator, sholder gun, sholder pest, sholder wire, streetlight 1*36 cfl eco, t-5 clip, taparia tester 813 yellow, timer for street light, tourch rechargable, 5meter ms pole, 7meter ms pole, 9meter ms pole, streetlight pole bracket single arm, streetlight pole bracket double arm, streetlight pole bracket junction box, pl tube light 4 pints lamps, 36 w choke pl osaram 4 pins, 36 w led bulb, 18 w led bulb, 15 w led bulb, 40 w led bulb, 2 core service wire 6mm, mnx 50 contactor l&t, coil for mnx 50 l&t, 2 core service wire 4mm, 50 w led bulb threded, panle box gi single dore 1.5*2, panle box gi double dore 2.5*2, 6 amp 5 pin socket, 6 amp switch, fan dimer socket type, board modle 4*4, board modle 8*8, board modle 8*16, 10 mm 4 aluminium armand cable, 3.5 mfd kadser, mcb 32 amp/2p, led flood 250w, pvc pipe 1", wall can, battery 100 amp, main switch 63 amp 3 pole, kit kat fuse 63 amp, kit kat fuse 32 amp, 16 meter ms pole, 30 w led repair, 36 w led repair, 48 w to 50 w led repair, 70 w to 75 w led repair, 100 w led repair, 75 w flood light repair, 100 w flood light repair, 125 w flood light repair, 150 w flood light repair, supplying and erecting m.s. pipe pole b grade 80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification no. oh-pl/gip+b131:b141, making cement concrete foundation including excavation (60 * 60 * 150) cm deep in 1:3:6 cement concrete 20 * 25 mm stone metal, (45 * 45 * 45) * cm / 45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (above 6 m to 9 m poles), supplying and erecting led street light fitting suitable for above 70w-75 lamp, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink extruded alluminium complete per specification no fg-odf/fls, providingt and erectinggalvanised 1000mm single arm sword type bracket with frp dome and ball as per specification no. oh-pl/pbkt, supplying, erecting & making dpmcb 6 a to 32 a in provided distribution board, supplying and erecting mains with 2x 2.5 sq mm frlsh copper pvc insulatedwire laid in prouied candot/trunking/insidepole/busbor or any other place as per specification wg/ma/bw, providing pipe type earthing with 40mm dia. gl pipe or 20mm dia. gi rod complete with all materials, supplying and erecting mains with isi mark

Central Government/Public Sector

CTN :40501084

18 Jun, 2025 NA

Multi City - Multi State

Tender For supply of rechargeable led work light 18 watt with aluminium die cast housing in premium power coa ted finish, strength: 6 cree leds of 3 watt each produces flooring light of 1000 lumens without any heat di spense, with charger. 4 strong magnets on the bottom. spec- led power-18 watt, voltage ac: 115-220 v, charging time- 8 hrs, run time- 7 hrs, battery voltage-3.7 volt, battery cap-6600 mah, li-ion battery, lume n-1000lm, light beam size-10m, waterproof & dust proof rating-ip65, material aluminium & pc housing- pmm a lens. model no- groz led/621 or similar. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40473516

16 Jun, 2025 NA

Ahmedabad - Gujarat

Tender For (supply)-supply of led bulkhead fitting, capacity 20 watt, operating voltage range (in volts) 75 to 160, & rated voltage (in volts) 75 to 140, v ac 1 phase 50hz, power factor > / = 0.9, color temperature (k) : 6000+/-500, over all efficiency: 120 lumen per watt, beam angle 120 degree, white color, protection ip-67, housing-pressure die cast aluminum powder coated housing, visor-polycarbonate based material cover, gasket-silicon material based gaske t, connected wire-3 core 0.75 to 1 sq mm pvc copper with 0.5 mtr length, wall mounted ( oval shape) make:- philips, crompton, wipro, jaquar, havells, poly cab only. [ warranty period: 30 months after the date of delivery ]

Exhaust Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector