Latest exhibition panel Tenders | Government exhibition panel Tenders

Central Government / Public Sector

CTN :45066219

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - mixed scrap of heavy melting : actual lot no. 03122605 0918 pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) scrap of cond. & unserviceable rusted and corroded mixed scrap of heavy melting ms, cs, ci, gi, ss contains pipes end body pcs. horizontal levers hand brake wheels angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins foot steps cut bits side barer housings pipe pcs straps liners sheets pipe pcs pins throwers locks races collars axle box covers, air brake pipes, guard seats, ms end body pcs, ms sheets, ms cut bits, ms rod pcs, sab parts, gi wire, ms ladders, ms channels, door hangers, tool box, ms meshes, bp fp hose pipes, knuckles, crushed paint drums, grease seals, yoke support plates, sliding doors yoke pins, sheet strips, ms pipes and pcs, rubber pads, chairs, roof sheets, grease drum, auxiliary reservoirs, cone bearing, hoop iron. wedges hyd. hoses fabricating scrap and other miscellaneous items of wagons sorts & sizes full or broken with or without attachments this material available at lot no.0636. location: road no.3to4cross and road 3 (single cut permitted for loading purpose only) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )

CTN :45057581

16 May, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of

Central Government/Public Sector

CTN :45002525

05 May, 2026 14.14 Lacs

Gwalior - Madhya Pradesh

Tender For tender for supply of airconditioners and other items at gwalior airport -supply of 1.5 tr inverter type , 5 star rating as per latest bee norms , hiwall , split airconditioner with rotary compressor operating on refrigerant r-32a/r-410a. the body of indoor unit shall be made of abs/hips/gs condensing unit should be of 100% copper coil & having all safety , air filters , evaporator , condenser , cordless remote , electronic operation control & all accessories supplied with the unit by oem etc as per manufacturer standards suitable for operation on 230 volts , 50 hz , single phase , ac supply , complete as required at site. , supply of 2.0 tr inverter type , 5 star rating as per latest bee norms , hi-wall , split airconditioner with rotary compressor operating on refrigerant r-32a/r-410a. the body of indoor unit shall be made of abs/hips/gs condensing unit should be of 100% copper coil & having all safety , air filters , evaporator , condenser , cordless remote , electronic operation control & all accessories supplied with the unit by oem etc as per manufacturer standards suitable for operation on 230 volts , 50 hz , single phase , ac supply , complete as required at site. , installation , testing , commissioning of 2.0/1.5 ton split inverter a/c i/c supply & fixing of iron angle structure stand suitable for outdoor unit , makeup interconnection , top up refrigerent , painting i/c necessary civil works complete as required , providing suitable size pvc pipe for drawing the gas/drain pipe and wire etc through the concrete/brick wall as required. , supply & fixing of extra copper refrigerant piping for suction and delivery line with all accessories suitable for following capacity acs i/c insulation , gas refiling , power & control cabling etc completed as required.of standard gauge for installation of above units as required at site. , supply & fixing of hard pvc drain piping of proper dia for installation of above units as required at site beyond company provided standard length. , supply , installing , testing and commissioning of 5kva voltage stabilizer suitable for 1.5/2.0 tr split ac units on wall including providing connections etc. as required. (model-v guard vgb 500 or equivalent). , sitc of industrial type ro water purifier having capacity minimum 50 lph capacity with uv & membranes , sediment filter , carbon filter , tds control , water level sensor , 3 prefilter (1 carbon candle and 2 micron filter) , auto flush & output water etc as per manufacturers specifications i/c , making inlet and outlet water connections with water cooler complete. suitable for operation on 230 v , single phase , 50 hz ac supply. , supply of water cooler of fully stainless steel body with thermostate cut- off automatic operation having cooling capacity 40 ltr. per hour and storage capacity 80 ltr per hour , working on 220 v , 50 hz , ac supply including automatically controls with temperature , over load protection , water line connection etc. complete as required . , supply of desert air cooler (duct type) with following minimum specifications as given below. fan size - 18 inch & above. fan speed - 1400rpm/ 3 speed. water tank capacity - 110 litres & above - jointless tank. material of cooler body/sump tank - galvanized steel sheet (isi marked to is 277 latest) cooling media - aspen/wood wool. cooling area - 500sqft & above. cooling pads - on 4 sides. , supply of frp wall support ladder of size 12feet meeting specifications as provided in the technical specifications of the agreement of the work(make - arham/ladderman/sumer/y-access) , supply of frp wall support ladder of size 20feet meeting specifications as provided in the technical specifications of the agreement of the work(make - arham/ladderman/sumer/y-access) , supply of frp tiltable telescopic tower ladder of size 32feet meeting specifications as provided in the technical specifications of the agreement of the work. (make - arham/ladd

CTN :44933969

30 Apr, 2026 NA

Jalandhar - Punjab

Tender For bid to ras supply of outer pipe hollow 6 inch 12mm thick , bearing no 24 , bearing no 18 , iron sheet 12mm 3x3 feet , inner pipe 4.5 inch outer dia , iron plate 2.5 x 3 feet 5mm , iron plate 2.5 x 3 feet 6mm , angle support 1.5 inch 6x35mm , disc brake assy comp , bolt 18mm 8 inch length , bolt 18mm 6 inch length , bolt 12mm 2 inch length , bolt 18mm 2 inch length , round wooden block 20 inch dia and 2 inch length , iron flat patti 12mm 3 feet length , pin lock hitch pin 5 inch , square pipe 3x3 inch , spring 6 inch , chain iron 24 inch length , square iron bar 1x1 inch , pin holding bush 1.5 inch , drill bits 12mm , drill bits 18mm , armd welding rod , cutter blade 14 inch , grinding wheel 4 inch , cutter blade 4 inch , paint og

CTN :44875999

25 Apr, 2026 NA

Patti - Punjab

Tender For bid to ras supply of outer pipe hollow 6 inch 12mm thick , bearing no 24 , bearing no 18 , iron sheet 12mm 3x3 feet , inner pipe 4.5 inch outer dia , iron plate 2.5 x 3 feet 5mm , iron plate 2.5 x 3 feet 6mm , angle support 1.5 inch 6x35mm , disc brake assy comp , bolt 18mm 8 inch length , bolt 18mm 6 inch length , bolt 12mm 2 inch length , bolt 18mm 2 inch length , round wooden block 20 inch dia and 2 inch length , iron flat patti 12mm 3 feet length , pin lock hitch pin 5 inch , square pipe 3x3 inch , spring 6 inch , chain iron 24 inch length , square iron bar 1x1 inch , pin holding bush 1.5 inch , drill bits 12mm , drill bits 18mm , armd welding rod , cutter blade 14 inch , grinding wheel 4 inch , cutter blade 4 inch , paint og

CTN :44757118

27 Apr, 2026 9.00 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : fabrication work d d - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of sulfur f

CTN :44959360

01 May, 2026 NA

Sonitpur - Assam

Tender For supply of thickness between 9 to 10 mm thick , non skid ceramic tiles of size 300mmx300mm on the floor , cp grating 100 mm dia , pvc bend110 mm , pvc t 110 mm , cast iron floor trap with grating 100 mm dia , curtain arrangement drapery and rod made of 25 mm dia and 1600 mm long , white cement , water storage tank triple layer 1000 ltrs , vitreous china wash hand basin white of size 450mmx300mm with vitreous china pedestal of suitable size , ppr reducer elbow 32mm x 20mm dia , brass cp wall mixer for mixing hot and cold water screwed down for ppr pipe of dia 20mm , plastic dustbin of capacity 40 ltrs , distribution box 8 way double door spn comma 240 volts copper bus bar , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5 m long , cable pvc insulated electric cables heavy duty copper conductor of size 1 point 5 sqmm single core , cable pvc insulated electric cables heavy duty copper conductor of size 2 point 5 sqmm single core , cable pvc insulated electric cables heavy duty copper conductor of size 4 sqmm single core , pvc casing capping of size 1 inch medium grade , pvc casing capping of size 3 oblique 4 inch medium grade snow white , switch piano 5 amp 230 volts flush type one way snow white , led tube light fittings 20w 230v box type 4 feets , steel screw full thread with rawl plug of 1 1 oblique 2 inch size 100 nos per pkt , pvc switch board snow white size 7 inch x 4 inch for sockets and switches , pvc switch board snow white size 8 inch x 10 inch for main switches db , pvc l bend and t junction joint for pvc casing and capping , switch socket combination snow white multipurpose 2 in 1 comma 15 amp 230 volts , switch socket combination snow white 5 amp 230 volts , service bracket 40mm dia gi tubing medium grade 1 point 5 mtr long , service cable pvc insulated aluminium conductor heavy duty 10 sqmm 2 core , ceiling rose three terminal snow white , led bulk head fitting high with led lamp 10 watts , pvc flexible wire copper conductor multi stranded 0 point 0016 oblique 76 , pvc flexible conduit pipe 15 mm dia , pvc round oblique squae block , fire extinguisher of one kilogram capacity comma dry power type along with its accessories , exhaust fan 230 volts 300 mm sweep plastic body alongwith louvers and complete fittings , exhaust fan heavy duty metal frame of 230 v for 450 mm sweep , electric geyser 5 star of capacity 50 ltr , refrigerator 220 ltr , water coolers capacity 40 liters per hours , deep freezer 500 ltr , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm comma 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm , aluminium strips 25 x 3 point 0 mm , galvanised iron strip 32 x 6 mm , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , chair dining wooden make of best quality first class hard wood , study chair of size length 56cm height 82 cm width 56 cm with arm seat and back cushion velvet pholestry , study table of size 4 x 2 wooden top on round tube structure with three drawers unit , ss table of size 1800 mm x 900 mm x 750 mm thickness of top 1 mm on 40 mm dia verticle and under structure support , water dispenser of 230 v 500 watts without refrigerator with normal cold and heating //bid details 2 / 88 capacity of 5 lts , peg set of six fitted with galvanised secrew along the internal surface of the wall in the room , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg

CTN :44959377

01 May, 2026 NA

Sonitpur - Assam

Tender For supply of thickness between 9 to 10 mm thick , non skid ceramic tiles of size 300mmx300mm on the floor , cp grating 100 mm dia , pvc bend110 mm , pvc t 110 mm , cast iron floor trap with grating 100 mm dia , curtain arrangement drapery and rod made of 25 mm dia and 1600 mm long , white cement , water storage tank triple layer 1000 ltrs , vitreous china wash hand basin white of size 450mmx300mm with vitreous china pedestal of suitable size , ppr reducer elbow 32mm x 20mm dia , brass cp wall mixer for mixing hot and cold water screwed down for ppr pipe of dia 20mm , plastic dustbin of capacity 40 ltrs , distribution box 8 way double door spn comma 240 volts copper bus bar , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5 m long , cable pvc insulated electric cables heavy duty copper conductor of size 1 point 5 sqmm single core , cable pvc insulated electric cables heavy duty copper conductor of size 2 point 5 sqmm single core , cable pvc insulated electric cables heavy duty copper conductor of size 4 sqmm single core , pvc casing capping of size 1 inch medium grade , pvc casing capping of size 3 oblique 4 inch medium grade snow white , switch piano 5 amp 230 volts flush type one way snow white , led tube light fittings 20w 230v box type 4 feets , steel screw full thread with rawl plug of 1 1 oblique 2 inch size 100 nos per pkt , pvc switch board snow white size 7 inch x 4 inch for sockets and switches , pvc switch board snow white size 8 inch x 10 inch for main switches db , pvc l bend and t junction joint for pvc casing and capping , switch socket combination snow white multipurpose 2 in 1 comma 15 amp 230 volts , switch socket combination snow white 5 amp 230 volts , service bracket 40mm dia gi tubing medium grade 1 point 5 mtr long , service cable pvc insulated aluminium conductor heavy duty 10 sqmm 2 core , ceiling rose three terminal snow white , led bulk head fitting high with led lamp 10 watts , pvc flexible wire copper conductor multi stranded 0 point 0016 oblique 76 , pvc flexible conduit pipe 15 mm dia , pvc round oblique squae block , fire extinguisher of one kilogram capacity comma dry power type along with its accessories , exhaust fan 230 volts 300 mm sweep plastic body alongwith louvers and complete fittings , exhaust fan heavy duty metal frame of 230 v for 450 mm sweep , electric geyser 5 star of capacity 50 ltr , refrigerator 220 ltr , water coolers capacity 40 liters per hours , deep freezer 500 ltr , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm comma 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm , aluminium strips 25 x 3 point 0 mm , galvanised iron strip 32 x 6 mm , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , chair dining wooden make of best quality first class hard wood , study chair of size length 56cm height 82 cm width 56 cm with arm seat and back cushion velvet pholestry , study table of size 4 x 2 wooden top on round tube structure with three drawers unit , ss table of size 1800 mm x 900 mm x 750 mm thickness of top 1 mm on 40 mm dia verticle and under structure support , water dispenser of 230 v 500 watts without refrigerator with normal cold and heating //bid details 2 / 88 capacity of 5 lts , peg set of six fitted with galvanised secrew along the internal surface of the wall in the room , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg

Central Government / Public Sector

CTN :44942548

28 Apr, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - mixed scrap of heavy melting : actual lot no. 03122604 0634 pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) scrap of cond. & unserviceable rusted and corroded mixed scrap of heavy melting ms, cs, ci, gi, ss contains pipes end body pcs. horizontal levers hand brake wheels angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins foot steps cut bits side barer housings pipe pcs straps liners sheets pipe pcs pins throwers locks races collars axle box covers, air brake pipes, guard seats, ms end body pcs, ms sheets, ms cut bits, ms rod pcs, sab parts, gi wire, ms ladders, ms channels, door hangers, tool box, ms meshes, bp fp hose pipes, knuckles, crushed paint drums, grease seals, yoke support plates, yoke pins, sheet strips, ms pipes and pcs, rubber pads, chairs, roof sheets, grease drum, auxiliary reservoirs, cone bearing, hoop iron. wedges hyd. hoses fabricating scrap and other miscellaneous items of wagons sorts & sizes full or broken with or without attachments location: road no.3 (single cut permitted for loading purpose only) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )

Central Government/Public Sector

CTN :44942576

28 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s ferrous fabricated materials of ms/ci scrap in nature such as weld mesh, ms duct, anti slip arrangement, earthen bond, galvanized (gi) sheet, ms sheet of various sorts and sizes, blower rotary forging, liner, guide fixtures, side frame fixtures, trolley of various sorts and sizes, trolley wheel & frame, battery fixing iron tray, ms pipe, coach/wagon stand, conveyor belt, ferrous body of auto change over panel, wire mesh, emu coach cut parts, ferrous portion of cab window assembly, sign on iron stand, salary bin, cupboard, structural items, different type of packing channels, trolley, lat, coach cut up parts, head stock, ms tank, grill gate, rolling shutter,wheel with plate, bins,regulator empty box, sliding doors, dolley, fob fencing, corrugated sheets, rectangular square tube &galvanised sheets, bogie mounted brake beam,brake blocks, gi sheets, pipe,square &rectangular tubes,stair case and handle,ferrous body of various types of motor, angle and channel fabricated with nut, bolt with or without brick and concrete,ladder,plate,grill, barricade, bolts, nuts, tray under frame, cut rod, rails of various sorts and sizes with/without concrete/brick/mud adhering,cut rails or rails used in support structures, coach head stock, coach parts,battery tray, ladder, all types of trolley wheels with minor nfs attachments, screens, channel post, sheets, stand, track machine cut up parts, ms pipes covered with or without rope &with or without parts of rubber, dome, vrla rack, vcb in dismantled condition, vrla battery box & clamp, stand, dtmf way station equipment box, led line display board, hydraulic lifting table with available fittings, vrla battery empty container, bed/base plate, fabricated cut rods,gi pipes, ci pipes and fittings, ms plate, roofsheets, angle, plate, platform bench, spring plank, clamps, cabinet, ms grill, sheets, ladder, steel gate, trolley,ms water tank, fire tender tank,roof truss supporting columns,purlins, sand box, fencing, tl rod, vcb panel, train display board, battery stand, boards, tools box, empty regulator &empty battery container, cut rod, ticket punching cut parts, hand rail, fabricated post/pipe/rod, strips, hoods, impellor, base plates, meshes, battery box frame, grs box, control panel, fan down rod, ac window covers ,angle / channels with/without rails, angle of tld, rack, lt panels, ferrous electrical panel boxes,i beam,transmission rods,fissure plates, main switch panel board w/o nfs attachments, ebc & rbc frame &enclosure,emu sliding door, high beam, silencer, , garden light post, tap changer cover with fiber attachments, empty battery container, stretcher, cupboard, dust bin, iron step, empty rotary junction box, empty regulator box, iron metal box, air reserviour compressor cylinder of varous sorts & sizes, garden light post, stand, mdb w/o non ferrous attachments, st light tubular post, gi/ms window, luggage rack, ,bed portion of weighing scale l with or without any minor non-ferrous attachments and all other scrap excluding ms hand hold in fabricated nature of sorts and sizes full/broken with/without other fs/ci/gi fittings in as is where is condition.pl no 98050126. note:(1) cutting is permitted to loadable size and for heavy nature items only. 2) during delivery if any major non-ferrous items found the same may be handed over to custodian. 3) jcb/crane loading permitted. location: behind a row bin 3&4

Exhibition Panel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector