Latest expansion plug Tenders | Government expansion plug Tenders

State Government

CTN :45263804

22 Jun, 2026 4.63 Crore

Panchkula - Haryana

Tender For corrigendum : tender for the supply of various equipments - muffle furnace, "al2o3 sample plate, al2o3 furnace door block, protection glove, crucible clip, crucibles, karl fischer titrator, "titration vessel, detector electrode with lead, generator electrode (with frit) with lead, desiccant tube and cap, injection septa (pack of 10), gas tight syringe 1.0ml , luer needle 17-gauge, dust cover, results manager software, main power pack, fuse, karl fischer titration reagent(s), nist calibration standard, refrigerated centrifuge (bench top), bottles/falcon tubes/adapters for 0.2ml tubes, one set of other items (adapters) required for improving the applicability/system performance should to be quoted, nitrogen evaporator, evaporation tubes, gas fuse , water purification system including water softner, cartridges, filters etc. for , bomb calorimeter, "ignition wire, cotton thread, combustion crucible, bomb, nist certified benzoic for calibration, any other accessories required for analysis of food samples., gas chromatograph with ecd, tcd, fid with autosampler, "pesticide column (30 m x 0.250mm x 0.25m (5ms (95% dimethyl-, 5% diphenyl-polysiloxane / 1ms (100% dimethyl polysiloxane or equivalent) 100 mm column for fatty acid profiling with main concern of trans fatty acid application, column for cholesterol application, stationary phase: 95% dimethyl-, 5% diphenyl-polysiloxane (30 m x 0.250mm x 0.25m),, "vial sets (1, 2 ml, crimp type, amber and clear glass), vials (10, 20ml crimp type with cap & septa), 300/500 l recovery vials, septa ptfe/silicone (for 1, 2 ml vials), septa ptfe/silicone (for 10, 20 ml headspace vials), ergonomic crimping tools for different vial types, ergonomic decapping tools for different vial types, head space vials 10,20 ml capacity, suitable syringes for quoted autosampler, suitable headspace syringe /valve/loop, quechers kits for pesticides and herbicides in following matrices:, matrices with high fat, matrices with high water content, matrices with high pigmented, spe cartridges for water., ultra performance liquid chromatography (uplc) with photodiode array (pda), fluorescence (fld) and refractive index detector (rid), sample vials with 1.5 ml or greater, stainless steel ultra sonic bath with the capacity of 5 l or more, with time setting (min) 1-30min or continuous operation with led and push button (should be ip 33 protection class) for sonication of spare parts as well as solvents, fittings, frits, ferules and tubings, tubing cutter, solvent bottles (1000 ml capacity), solvent filters (glass & ss both, compatible manual syringes -10 l, 20 l, 50 l, standards for hplc calibration for pda, ri and fluorescence detector, consumables required for each detector must be provided., "hplc columns: one each of, c8 = 250 4.6 5m c18 = 250 4.6 5m, cyano = 250 4.6 5m. amino = 250 4.6 5m, phenyl = 250 4.6 5m. silica = 250 4.6 5m., all columns must be supplied with respective guard column and holder. ", uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., ft-ir with atr & liquid cell, " hydraulic press with kbr die and pellet holder, suitable mortar pestle (dia 5-6 cm), suitable portable de humidifier to maintain 30- 60% rh, temperature and relative humidity digital indicator with calibration certificate from iso 17025 accredited lab., reference nist standard polystyrene film (0.3 mm) over the range of 3800 cm-1 to 650 cm-1., abbes r

CTN :45512407

02 Jul, 2026 NA

Ernakulam - Kerala

Tender For tender for supply of pressure transmitter , o ring , locking screw , loctite 601 , conditional actuator safeties card , overspeed detection card , bearing for timing gear , bevel pinion , o ring , gasket joint , v belt a49 , valve guide , expansion bellow , o ring - exh valve guide 60 c7 id18x2.5 , press switch set at 1.5bar mode pe2.5 , pressure transmitter , set bolt m27 item no 203 , gfl nut , washer , valve relief assy , set bolt m24x3x140 8.8 , screw set , nut , allen screw , circlip external 19mm , banjo boltm12x1.5 , washer plain , washer copper , copper washer 18x24 , washer copper , washer copper , worm drive hose clip 30mm , conical spring washer , disc spring , spherical brg assembly , main bolt , links , spacer , cap screw position 40 , spring washer position 41 , overload roller , cap screw position 80 , main bearing assly , eccentric shaft , pinion , punched gasket , flexmast coupl pipe 88.9mm o.d 096500v3.650 , circlip internal , flexmast conn gm10006 038 38 od pipe , joint , key for damper , damping bush , fuel feed pump del suction conn , sleeve dn32 pn16 , sleeve dn200 pn16 , rubber compensative sleeve dn150 pn16 , element for lo thermostat 63 71 deg c , o ring an28 , oil level contact type 20007 , speed sensor 19050 , rubles compens sleeves dn50 pn16 lf130 , injection pump assly dia23 grad , 2 way pneumatic valve , o ring 05x260 , main bolts , temp sensor rtd pt100 mbt 2 s 80 1/2 fie dgf , overspeed air intlet connection , governor control air inlet connection , fuel rack position limiter air inlet connection , flow switch , pressure switch xml bso4b2s11 , sleeve nt1 cc pn16 dn40 av cb , spacer , gasket , addesive super cyano 495 , metallic gasket , corrugated metallic joint , expansion bellow , pressure reducer 30 7 bar , filter pad set fx4000 , lid seal for fx4000 , tie rod , bush , bush , lgc pin lgc g5 8x30 , group small end bearing , o ring , bush , roller valve gear bar , valve guide , snap ring , sealing ring an 13 60c7 , stud , spring collar , spring , o ring ms29-513/126 21a7 nse 6.531 , nozzle injector , injector nozzle , needle , safty valve on cyl. head , pin for rack bar , link for rack , valve feed , spring , coupling holder , top spring collar , scale shim bar , serrated pin , positioning pin , filter oil fuel pump 1set 16nos , adjusting screw bar , o ring , metafram bush bp25 16/20x20 , ball bearing skf 6307 , shim for gov control , spacer bar , o-ring an 49 nse6.5 60c7 , o ring anno 53 nse 6.5 60 , bearing roller , water pipe gasket , retaining valve rk44dn65 , seal housing flange , o ring , o ring , spring collar bar , gasket , o ring no18 nse6.5 60c7 , loctite 573 , gasket , particle detection filter , b.s.ring type c30 nse6.51 20a8 , thermocouple for turbocharger , fuel filter element , o ring 162x8 , nut for shaft , limit switch for gachot valve , protect cyl head tie rod , guide piece f valve gear , lock washer pair , dome nut m30x2 , piston ring p3712 , pneumatic distributor pneu/pneu , inlet valve seat , solenoid valve safety stop , hexagon bolt , ht water pump assly cw , o ring ms 295 13/245 60c7 viton , ring spanner for nuts 17 19 22 24 46 50 mm , solenoid over speed air , pressure regulator , pressure transmitter 10 bar 24vdc o/p-4-20 ma , gasket , exhaust valve seat , bush , displaying and protection module , illuminated blue push button 2no , hexagon bolt , o ring an53 60c7 , o ring kalrez , set bolt m30 x 3.5 , joint 65x65x2mm , ball bearing skf 6212 , o ring-exh valve guide-60 c7 id 18x2.5 , actuator safeties card , gasket , starting air hose assly , pressure switch 2.5-28 bar , regr safeties temp card rsp card , pressure transmitter 6 bar 24vdc o/p-4-20 ma , oil seal for fuel booster pump 16x40x10 , bs ring-bsb d12 nse6.51 20a8 , piston , nut , roller bearing 110 60 22 , bush , socket for pressure sensor or switch , air filter , power switch , field communication module 170fnt11001 , illuminated green push button 2no , gasket , sensor for exh temp tc , filter for pressure redu

CTN :45512795

22 Jun, 2026 2.42 Crore

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of seal oil output , accumulator , press switch clutch oil , press gauge clutch , differential pressure device , motor indicating lamp , gasket , pressure switch , temp transmitter pt100 , main pump , temperature transmeter , circlip external f55 , ferrule id 10 steel , set of gaskets for condenser for 144tr acplant for p17 class , kit for power contactor of 160 kw soft starter , motor 22 kw 2 p ip56 sq cage induction 415v 50hz ci f b5 , lamp 380v ac red for lcpb siemens , push button with lamp green 1no - 1nc , catridge for indufil duplex oil filter model idgl-2-226 , pump shaft part no. 2200 for celv 65-250 , soft starter ge astat type qc1ndp 160 kw , mc mccb ge 100a s 400a with aux contact 2no-2nc , mc mccb ge 100a s 400a with aux contact 2no-2nc , semi conductor fuses ge - feraaz 200a 6.611 rd30-xx0315 , main power contactor ge 25a 415v ac 3p power contactor , main power contactor ge 25a 415v ac 3p power contactor , indicating lamp green leb type 110v ac , mcb ge 2 pole 6a 110v ac , emergency push button red 1no-1nc , start push button green 1no-1nc , start push button green 1no-1nc , mc mccb ge 3pole 200a 415v ac s-2ka mc401 , star contactor 415v ac with 1no-1nc coil voltage 110v ac , star contactor 415v ac with 1no-1nc coil voltage 110v ac , delta contactor 415v ac with 1no-1nc coil voltage 110v ac , delta contactor 415v ac with 1no-1nc coil voltage 110v ac , motor protection relay ge- multiline lm 10 , set of indication lamps one of each type for lcp , timer eapl ge etm0010046 1 no- 1 nc , aux contactor ge rl4rd022 td 4no-4nc coil 24v dc , aux contact ge rl4rd040td 5no coil 24v dc , aux contact ge rl4rd040td 8no coil 24v dc , mcb 16a dp siemens , mcb 20a dp siemens , mcb 2a siemens , lamp green 24v dc , lamp amber 24v dc , stay push button epb 1110020 2no 1nc , bridge rectifier ems0011132 25a , contractor ge rl4rd040td 4no coil 24v dc , push button with lamp green 1no - 1nc , indication lamp amber , indication lamp green , indication lamp red , adjustable spanner 12inch , insulated screw driver 3inch , connectors 1-4inch mpt x 1-4inch sae , flare nut 1-4inch , torch light of 2 cells , copper tube 1-4inch x 2mtr , charging adopter 3-4inch fpt x 1-4inch sae , connector 1-8inch mpt x1-4inch sae , gauge adopter 1-8inch fptx1-4inch sae , insulation tape , flexible gas charging line , tong tester , solenoid valve danfoss evra25-24 v dc coil , bridge rectifier usha 25a , annual inspection kit part no. kx127-2 , shaft seal replacement kit part no. kxgs127 , capacity control sub assembly part no.xr16289-0 , microswitch part no. g57057 part of overhaul kit , actuator piston part no.xr12042-2 , end cover - rh side , charging valve , valve needle type 1-4inch npt(m) x 1-4inch ferrule , flexible connection for discharge line , shock mounts for ac plant , bearing cover fixing bolt part no.0036 , temperature switch danfoss rt107 70 to 150 deg c , water line pressure gauges , magnetic level switch for 82.5 tr ac plant for snf class , magnetic level gauge for 82.5 tr ac plant for snf class , transformer 500va 380-24 240v instrans , lamp siemens led green 24v dc , push button siemens e-22 1 no-1 nc green , push button siemens e-22 1 no-1 nc red , semi conductor fuses , temperature indicator 0 to 100 , star bearing kit , metaflex coupling for 65tr , human machine interface hmi-display , thermostatic expansion valve for liquid injection , inspection kit for xrvn-127r4-165-26 , refrigerant suction filter , capacity contorl piston spring , motor replacement gasket & o-ring set , safety valve part no. 07940 , filter element for duplex oil filter , gasket set for condenser

CTN :45328819

15 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : equipment items - dual output regulated dc variable power supply-input voltage : 230v/50 hz ac.output voltage : (0-30)v dc.output current : (0-2)a.dcprotection circuit : over voltage, over current and short circuit protection.high efficiency : greater than 85 %.low ripple and noise less than 50 mv.digital display, digital ic trainer kit with breadboard:+5v dc, 1 a regulated power supply. 12v dc / 15v dc, 200 ma regulated power supply.solderless breadboard with minimum 840 tie- points, power distribution buses.zif(zero insertion force)ic sockets to accommodated 8 or 16 pin ics.logic input and output leds for output monitoring.16 buffered led outputs.16 debounced switch inputsvariable clock generator: 0.5 hz to 50 hz.single pulse output : 100 ms(buffered,positive and negative outputs).one seven-segment display with 4 bcd inputs.built-in logic switches.manual clock: debounced push-button(one pulse per press)., digital storage oscilloscope-bandwidth: 50-100 mhz. sampling rate: 1gs/sec.channels: 2 (minimum). power supply: 100v 240v ac, 50-60 hz automatic measurement: vpp, vavg,rms, frequency, period, vmax, vmin, rise time, fall time, + width, - width, +duty, - duty etc., horizontal scale: 5 ns/div 50 s/div or equivalent vertical resolution: 8 bits (2 channels simultaneously) vertical sensitivity: 1 mv/div 10 v/div (at input) waveform math: +, -, x , , invert, fft etc., waveform storage: 16 waveforms or equivalentcommunication interface: usb host, usb interface. c 7-inch color display or equivalent input impedance - 1 m 2%, // 20 pf accessories:2 xpassive probes (1x/10x), pcb prototype machine :manual software : copper cam & mach3 mill.resolution (x/y) : 3.125 micrometre.working area(x/y/z) : 200 x 300 x 120 mm.minimum width line and space : 0.1 mm (4 mil).maximum travel speed : 58 mm/sec(2.28 ).drilling range: 0.2 3.175 mm(8-125 mil).maximum drilling cycles : 50 cycles/minmain axle power rating : 300w.main axle rotating speed : 25000 rpm.maximum working speed : 3500 mm/min.feeding height: 120 mm.working drive : 0.02 0.05 mm.repositioning accuracy : 0.01 0.02 mm.supported formats : standard gerber, dxf, excellon.capability of processing various materials:fr4, copper clad, acrylic, metal, aluminium etc.power supply : 230v ac

CTN :45475071

15 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of non-consumables for ece department - purchase, dual output regulated dc variable power supply input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v overload protection. dc offset: 0 to 10 v adjustable. attenuation: 0 to 60 db., dso (digital storage oscilloscope) bandwidth: 50 100 mhz. sampling rate: 1 gs/s. channels: 2 (minimum). power supply: 100 240 v ac, 50 60 hz. automatic measurements: vpp, vavg, vrms, frequency, period, vmax, vmin, rise time, fall time, +width, width, +duty, duty, etc. horizontal scale: 5 ns/div 50 s/div or equivalent. vertical resolution: 8 bits (2 channelssimultaneously). vertical sensitivity: 1 mv/div 10 v/div (at input). waveform math: +, , , , invert, fft, etc. waveform storage: 16 waveforms or equivalent. communication interface: usb host and usb interface. display: 7-inch color display or equivalent. input impedance: 1 m 2% || 20 pf. accessories: 2 passive probes (1x/10x)., digital ic trainer kit with breadboard +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulse per press)., lvdt trainer kit ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain guage trainer kit ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual.

CTN :45465678

19 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply, installation and testing of electronic equipments - supply -ece lab equipments, single output regulated dcvariable power supply- input voltage: 230v / 50hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., dual output regulated dc variable power supply- input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator - frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v, digital ic trainer kit with breadboard - +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie- points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulseper press)., dc voltmeter(digital) - dc digital voltmeter - 3 digit led/lcd display, measurement range: 0 20 v dc,accuracy: class 0.5( 0.5 % full-scale), dc ammeter - dc ammeter digital - 3 digit led/lcd display, measurement range: 0 5 a dc,accuracy: class 0.5 ( 0.5 % full-scale), lvdttrainer kit - ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain gauge trainer kit - ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. instrumentation amplifiers with 3 digit display for strain / output voltage. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual., ask modulation and demodulation kit - message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz,amplitude 5 v. carrier signal: sine wave, frequency 200 khz, amplitude 5 v. supply voltage (board): +12 v, +5 v dc. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., fpga trainer kit - must use industry-standard mid-range fpga device usb-jtag programmable, compatible with vivado ise (webpack). power supply: 5 v dc through usb or external adapter. on-board peripherals: leds, switches, push buttons, 7-segment display,clock source, gpio / pmod expansion ports, uart, vga / hdmi, usb- uart bridge, usb cable. user manual., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

CTN :45461114

16 Jun, 2026 NA

Kozhikode - Kerala

Tender For purchase of raw materials to the department of pmr,gmckkd - list of consumabales, transfemoral kit- polycentric - endoskeleton [with good quality certification engraved], transtibial kit [endoskeleton ] [with good quality ce/isi engraved], sach foot with toes - various sizes, left and right [ranger type], araldite - 103 grade, hardner for 103 grade araldite, pediline sheet 5mm [110cm x75cm], cotton stockinet 80mm- [10 meter], cotton stockinet 100mm- [10 meter], cotton stockinet 150mm- [10 meter], drop lock knee joint size ii [alimco type], drop lock knee joint size iii [alimco type], knee joint lower bar size ii, knee joint lower bar size iii, knee joint upper bar size ii, knee joint upper bar size iii, polypropylene sheet 2mm [1x2mtr], polypropylene sheet 3mm [1x2mtr], polypropylene sheet 4mm [1x2mtr], velcro [hook and loop] 25mm [ best quality, beige colour, 25 mtr], velcro [hook and loop] 50mm [ best quality, beige colour, 25 mtr], nylon webbing 25mm [ beige colour, 10 mtr], nylon webbing 50mm [ beige colour, 10 mtr], stirup [local made] large, stirup [local made] medium, ankle bar x24x , ethaflex 2mm[1x2mtr], ethaflex 3mm[1x2mtr], ethaflex 5mm[1x2mtr], chart paper, cling film roll, 30cm [30mtr roll], press button [1000 no: packet] good quality, mcr sheet 10mm [ 110cmx75 cm], sole rubber 10mm [light weight cork rubber, 1.75x1mtr], synthetic rubber adhesive fw 707 [5 liter tin, split rivet [1000 no: packet] good quality, drill bit 3/16 , good quality, cd marker, thermocutting blade [10 no: packet], sl calf leather, buffhide leather, aluminium flat 1/8 x , gloves [ heat resistant for oven, heavy duty ], cosmetic gloves [left], cosmetic gloves [right]

CTN :45405427

22 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of interior stickers with braille script for lhb ac 3 tier coaches. , as per drawing: le64016 alt b item no 1 to 7, 9 to 11,13, 15, 18 to 22,27 & 29 with braille script to icf/md/spec-253rev.00, amd-02 packing instruction: lettering inside: one complete set of lettering inside should be packed in cardboard box. different subsets should be made & a list of items should be pasted on each packet of subsets. letters packed in each subset under different headings are as under:- plumbing : emergency flush button, press for flush, notice for bio toilet moulding:- duties of coach attendant, push, pull, no smoking, alarm and penalty notice, door closes automatically, safety message near gate, notice for luggage capacity. lavatory:- dustbin, fire extinguisher, soap dispenser, no drinking water, no waste into toilet, western style, press for flush, fire prevention and safety, marking of lavatories / body side door, notice for lavatories, drinking water, unified notice for fire prevention & safety. seat & berth:- sticker for seat number, berth numbers, letter for chaining luggage, notice for unreservedcoaches. air brake:- reset emergency brake, feed pipe, brake pipe, closed, open, hand brake panel : furnish plate, complaint book. window & ceiling: pull window glass inside, indication plate & sticker for emergency window, emergency openable window the cardboard box shall carry a qr code having details as listed below : 1 name of the manufacturer 2 purchase order number 3 purchase order date 4 unique serial number (or lot number for bulk items) of the manufacturer or 5 date of manufacture 6 delivery challan no. 7 delivery challan date the qr code shall be as per iso/iec18004 model2 and the data shall be available as xml using the tags detailed above. incase the above details are not available, or the qr codesare not readable, the supplied material is liable to be rejected. [ warranty period: 30 months after the date of delivery ] ]

CTN :45388524

22 Jun, 2026 NA

Uttara Kannada - Karnataka

Tender For supply of clamp bolt , gasket exh out connection , seal o ring , switch magnetic , kit air cleaner elements (6c 200kva) , belt , v ribbed , element , lub oil filter , kit , hx40 turbo repair , screw , hex flange head , seal rectangular ring , pin timing , plug expansion , tappet valve_ 3907240 , hose flexible , seal rectangular ring , gasket hydraulic pp , screw , hex flange head cap , screw , hex flange head cap , housing timing pin , valve exhaust , plug expansion , clamp hose , support , camshaft thrust , nut heavy hex , bolt connecting rod , hose plain , filter fuel , clamp , hose , gasket exhaust manifold , nut connecting rod , clamp hose , gasket cylinder head , gasket cover plate , set , main bearing (std) , bushing , screw hex flange head cap , washer , sealing , hose , plain , pump water , hose flexible , gasket , lub oil clr cover , filter , coolant , clamp hose , clamp hose , control governor , pressure sensor , pick up magnetic , seal , rectangular ring , tank expansion , plug , zinc electrode , clip , tube injector fuel supply , gasket , connection , hose , flexible , hose flexble , temperature sensor (rtd , pt-100) , plug , expansion , screw , hex flange head cap , cover , rear , plug expansion , hose , flexible , valve check , screw , rkr lever adjusting , gasket , breather , exchanger , heat , gasket , connection , thermostat

corporations/Associations/Others

CTN :45197600

05 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For corrigendum : tender for supply of various types of items -rubber bowl-small hand sanitizer5litre, 80% ethyl alcohol i.p v/v, glycerol 1.p 1.45% v/v, hydrogen peroxide 1.p 0.125% v/v, purified water-qs polythene wrapper (stretch film) tape fastener hook type synthetic (velcro) 25mm wide, is:8156 pop rivet ø 1/8" x 1/4" aluminium aluminium rivet, 5/32" flat head rivet 3x12 mm as per is:2907 copper3x12mm, copper material, 1kg box. flat head rivet 3x20 mm as per 15:2907 copper3x20mm, copper material, 1kg box tape fastener hook type synthetic (velcro) 16mm wide, is:8156 tape fastener loop type synthetic (velcro) 16mm wide, is:8156 tape fastener loop type synthetic (velcro) 25mm wide, is:8156 press button big press button medium wire mesh smooth as per sample smooth wire mesh size-3/4"plastic freeloader strap buckle set (bag accessories), colour-black size-"plastic freeloader strap buckle set (bag accessories), colour-black cone sander (fine) vaseline (500gms in a bottle) steel grip electric tap surform file half round prefabricated shell metal, stainly or equivalent ethaflex 6 mm, 1x1 metre, 6 mm thickness thermoformable, for padding & cosmetic cover purpose in p&o appliances ethaflex 12mm (110cm x 73mm) polyethylene or polyurethanes composition with 110cm x 73mmx 12 mm, density (lbs/cubic ft)-2-3, compression ethaflex 3mm (110cm x 73mm) polyethylene or polyurethanes composition with 110cm x 73mm x3mm, density(lbs/cubic ft)-2-3, compression sheet rubber m.c thick 11/12 mm hard, 50/60 shore "a" r.d. 0.38/0.42 colour as approved beige colour

Expansion Plug Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others